Kleton low-profile safety guard, safety yellow

Kleton low-profile safety guard, safety yellow

Manufacturer code KLETON: KD127, model KD127

This item is not kept in stock. Please allow 15 days for delivery.

Available in 6 sizes. Select the variant you need from the drop-down menu.

The Kleton low-profile safety guard protects equipment and personnel from accidental damage and injury. It is made of a 4 x 4 in square tube welded to two 8 x 8 x 1/2 in base plates, each drilled with four 3/4 in holes for floor anchoring. Its safety yellow powder coat finish keeps it highly visible in work areas. Offered in six sizes (2, 3 or 4 ft wide, 1-1/2 or 3-1/2 ft high), it is made in Canada and covered by a 1-year limited warranty.

Features: Kleton low-profile safety guard

• 4 x 4 in square tube welded to two base plates
• 8 x 8 x 1/2 in base plates, four 3/4 in holes per plate
• Safety yellow powder coat finish
• 6 sizes: 2, 3 or 4 ft wide, 1-1/2 or 3-1/2 ft high
• 1-year limited warranty, sold individually

Applications: Kleton low-profile safety guard

Anchored to the floor in front of a machine, a workstation or a door, in plant or warehouse traffic areas, the Kleton low-profile guard protects equipment and personnel from accidental impacts. The 1-1/2 ft high sizes protect the base of equipment; the 3-1/2 ft sizes provide a taller barrier.

Care: Kleton low-profile safety guard

Clean with soapy water. Periodically check that the floor anchors are tight and touch up chipped powder coat. Replace the guard if the tube or a base plate is bent after an impact.

FAQ: Kleton low-profile safety guard

Are floor anchors supplied with the guard?

The manufacturer does not mention any anchoring hardware with this guard. Each base plate has four 3/4 in holes: plan for anchors that suit this diameter and your floor.

Which size should I choose?

Choose the width (2, 3 or 4 ft) based on the equipment to protect, then the height: 1-1/2 ft for a low profile or 3-1/2 ft for a taller barrier.

How much does the guard weigh?

From 65 lb (2 x 1-1/2 ft) to 115 lb (4 x 3-1/2 ft): 75 lb for 3 x 1-1/2 ft, 85 lb for 4 x 1-1/2 ft, 95 lb for 2 x 3-1/2 ft and 110 lb for 3 x 3-1/2 ft.

How does the guard attach to the floor?

Through its two 8 x 8 x 1/2 in base plates, each drilled with four 3/4 in holes for floor anchoring.

Where is the guard made and what is the warranty?

It is made in Canada and covered by a 1-year limited warranty.

Suggestions for this product

For the maintenance mechanic drilling concrete to anchor this Kleton guard in front of a machine, plan for a Pioneer yellow high-visibility vest (V6936) with mesh back so forklift drivers can spot the worker, Endura Pro gloves (G378GKGVBE) that resist cuts and impacts while handling the plates, SecureFit anti-fog safety glasses (YASF401BG) against concrete chips, a 3M over-the-head earmuff (OPH7A) during drilling and a Moldex valved mask (R2300) against concrete dust.

To mark off the area during the work, stretch a yellow “Attention” barricade tape (ECT3YF1) and a flagged warning line (EFLAC). To protect a single post, see the Kleton heavy (EBKD125) duty bollard with the same square tube; in this same lot, the Kleton rack upright protector (EBKH858) shields the base of racking and the Kleton floor angle guard (EBRN065-48) keeps traffic away from walls.

The texts coloured in green correspond to hyperlinks leading to specific safety equipment or to a general information link.