- New
Vestil steel safety bollard, yellow
EBBOL24-5.5
$171.55
This item is not kept in stock. Please allow 15 days for delivery.
Fully welded steel safety bollard by Vestil, finished in safety yellow powder coat with a removable black cap. Base plate drilled for 3/4 in anchor bolts (sold separately). Offered in 5 heights and diameters.
Return conditions:
No returnable if used. For more information about our return policy, please refer to the Orders and Returns.
Vestil steel safety bollard, yellow
Manufacturer code Vestil: BOL-24-5.5, model BOL-24-5.5
This item is not kept in stock. Please allow 15 days for delivery.
Available in 5 heights and diameters. Select the variant you need from the drop-down menu.
| Sylprotec code | Manufacturer code | Height and diameter |
| EBBOL24-5.5 | BOL-24-5.5 | 24 in / Diameter: 5-1/2 in |
| EBBOL36 | BOL-36-5.5 | 36 in / Diameter: 5-1/2 in |
| EBBOL42-5.5 | BOL-42-5.5 | 42 in / Diameter: 5-1/2 in |
| EBBOL42-6.5 | BOL-42-6.5 | 42 in / Diameter: 6-1/2 in |
| EBBOL48 | BOL-48-6.5 | 48 in / Diameter: 6-1/2 in |
The Vestil safety bollard is a fully welded steel post designed to absorb forklift impacts and protect buildings, racking, machinery, doorways and pedestrian walkways. Finished in baked-on safety yellow powder coat with a black and yellow band at the top, it is capped with a removable black cap. Its 8 x 8 in base plate, slotted for 3/4 in anchor bolts (sold separately), allows for a permanent installation on a concrete slab.
To dress up and protect a bollard already in place, see also the cover (CB464YR) that slides over an existing steel bollard.
Features of the Vestil bollard
- Fully welded all-steel construction (ASTM A-36 steel, AWS welds)
- Baked-on powder-coat finish, safety yellow, black and yellow band at the top
- Removable black cap
- 8 x 8 in base plate, slotted for 3/4 in anchor bolts (sold separately)
- Sold individually
Applications of the Vestil bollard
Installed in front of dock doors, racking, machinery, tanks or pedestrian walkways, this bollard protects equipment and people from forklift and vehicle impacts, indoors and outdoors.
Care of the Vestil bollard
At least once a month: clean the bollard, check that the anchor bolts are tight and replace any that are damaged or corroded, inspect for cracks, corrosion or impact damage, touch up paint on bare metal, and replace the bollard immediately if it is damaged.
FAQ: the Vestil bollard
Are the anchor bolts included?
No. The bollard is drilled for 3/4 in anchor bolts, sold separately; their length and diameter should be determined by the building's engineer.
What is the difference between the 5-1/2 in and 6-1/2 in models?
This is the diameter of the steel tube (manufacturer's designation); the 6-1/2 in model is heavier-duty and offered in the 42 and 48 in heights.
Can the bollard be filled with concrete?
The removable cap allows for optional concrete filling to add weight to the bollard, if needed.
Is the bollard suitable for outdoor use?
Yes, the baked-on powder-coat finish is designed for both indoor and outdoor use.
How do I install the bollard on a concrete slab?
Position the bollard, mark the location of the 4 base plate slots, drill with a masonry bit to the depth specified by the anchor manufacturer, then install the bolts.
Suggestions for this bollard
The supervisor having these Vestil bollards installed at loading docks equips the crew with a class 2 traffic vest (VV53), A3 Kevlar cut-resistant gloves (GS13KFNT), SecureFit SF202 glasses (YASF202), Laser Lite earplugs (OA1101) and posts the "Look out for forklift" notice (EOS509) at the entrance of the area.
During installation and around the bollards, mark the passage with a 36 in cone (EPTCONE36), a red and white striped warning tape (ECT750R), a half-dome convex mirror (M88) for T intersections and a 10 ft extendable aluminum barrier (EPT999). To dress the bollard, see the Innoplast (CB464YR) bollard cover; the 4-1/2 in Kleton KI293 (EBKI293-36) bollard and the square-tube heavy (EBKD125) duty bollard are available for other layouts.
EBBOL24-5.5
Data sheet
- Product group
- Safety equipment
- Main category
- Industrial accessories
- Sub category
- Warehouse products
- Name of the product
- Safety bollard
- Series of products
- BOL
- Product code
- EBBOLXX
- Sort by keywords
- Safety bollards
- Product use
- Protection of equipment and structures against impacts
- Manufacturer
- Vestil
- Country of origin
- United State of America
- Features
- 3 in black and yellow band at the top
- Additional Features
- ASTM A-36 steel, AWS welds
- Includes
- Removable black cap
- Mounting type
- Base plate 8 X 8 in, 4 slots for 3/4 in anchor bolts
- Material1
- Steel
- Material2
- Polymer powder coating
- Length (in/cm)
- Variable according to selection
- Width (in/cm)
- Variable according to selection
- Height (in/cm)
- Variable according to selection
- Weight (lb/kg)
- 20.38 to 44.2 lb / 9.24 to 20.05 kg
- Sold by
- Unit
- Color
- Yellow
- Return conditions
- No returnable if used. For more information about our return policy, please refer to the "Orders and Returns" link on the home page
- Caution
- Anchor bolts not included
Specific References
- mpn
- BOL-24-5.5
You might also like
Comments (0)
No customer reviews for the moment.
8 other products in the same category:
This item is not kept in stock. Please allow 15 days for delivery.
Fully welded steel safety bollard by Vestil, finished in safety yellow powder coat with a removable black cap. Base plate drilled for 3/4 in anchor bolts (sold separately). Offered in 5 heights and diameters.