- New
Eagle HDPE wall protector, yellow, pair
PC1726
$284.00
This item is not kept in stock. Please allow 15 days for delivery.
Eagle wall protectors in high-visibility yellow high-density polyethylene (HDPE), sold in pairs. Energy-absorbing construction that resists cracking and chipping. 42 x 2 in, 6 or 10 in high; can be mounted end to end, anchors not included.
Return conditions:
No returnable if used. For more information about our return policy, please refer to the Orders and Returns.
Eagle HDPE wall protector, yellow, pair
Manufacturer code Eagle: 1726, model 1726
This item is not kept in stock. Please allow 15 days for delivery.
Available in 2 heights. Select the variant you need from the drop-down menu.
| Sylprotec code | Manufacturer code | Height |
| PC1726 | 1726 | 6 in |
| PV1728 | 1728 | 10 in |
Eagle wall protectors help prevent damage to walls in areas used by forklifts, hand trucks and other warehouse vehicles. Made of high-visibility yellow high-density polyethylene, their construction absorbs energy and resists cracking and chipping. Each protector is 42 in long and 2 in wide, 6 or 10 in high; they can be mounted end to end to protect a longer stretch of wall. They are sold in pairs (set of 2 protectors); anchors are not included. Manufacturer: Eagle (Justrite Safety Group).
Features of the Eagle wall protectors
- High-density polyethylene (HDPE), high-visibility yellow
- Energy-absorbing construction, resists cracking and chipping
- 42 in long, 2 in wide, 6 or 10 in high
- Can be mounted end to end; anchors not included
- Sold in pairs (set of 2 protectors)
Applications of the Eagle wall protectors
Fastened along the walls of warehouse, plant or dock aisles, Eagle wall protectors help prevent damage caused by forklifts, hand trucks and other warehouse vehicles. Mounted end to end, they protect a continuous stretch of wall; for corners, the same range offers corner protectors.
Care of the Eagle wall protectors
Clean with soapy water. Periodically check that the anchors are tight. Replace the protector if it is split or deformed.
FAQ: the Eagle wall protectors
Is it sold individually or in pairs?
In pairs: Eagle wall protectors are sold in pairs (set of 2), and the weight shown is for the pair.
Which height should I choose, 6 or 10 in?
Both models are 42 in long and 2 in wide. The 6 in model weighs 8 lb per pair; the taller 10 in model weighs 14 lb per pair.
Are the anchors included?
No, anchors are not included; plan for anchors that suit your wall.
Can I protect a long wall?
Yes, the protectors can be mounted end to end to cover a longer stretch of wall.
Where are the protectors made?
They are made in the United States by Eagle (Justrite Safety Group).
Suggestions for this Eagle wall protectors
For the maintenance worker installing a row of Eagle protectors along a warehouse wall, plan for a Pioneer orange surveyor vest (V6676) with 13 pockets in polyurethane-coated polyester, a fluorescent orange long-sleeve shirt (VV44) with reflective stripes, open-finger polyurethane-coated gloves (GSSXPU3OF) to handle the hardware, Cee-Tec safety glasses (YA12E93103) with yellow lenses and a 3M 9210 mask (R9210) against drilling dust.
For the corners of the same wall, see the Eagle corner protector (PC1720) from the same range. Around nearby columns, the orange (PC178OR) Eagle column protector or the Diversified Plastics octagonal (PCCP6) protector complete the protection. During installation, set out a 28 in orange cone (EPTCONE28B) and, after washing the floor, a bilingual “Caution wet floor” sign (ETR01).
PC1726
Data sheet
- Product group
- Safety equipment
- Main category
- Industrial accessories
- Sub category
- Warehouse products
- Name of the product
- Wall protector
- Product code
- PX172X
- Sort by keywords
- Wall protectors
- Product use
- Prevents damage to walls in warehouse vehicle traffic areas
- Manufacturer
- Eagle
- Country of origin
- United State of America
- Features
- Energy-absorbing construction
- Additional Features
- Resists cracking and chipping
- Mounting type
- Can be mounted end to end
- Material
- High density polyethylene (HDPE)
- Length (in/cm)
- 42 in / 106.68 cm
- Width (in/cm)
- 2 in / 5.08 cm
- Height (in/cm)
- 6 to 10 in / 15.24 to 25.40 cm
- Weight (lb/kg)
- 8 to 14 lb / 3.63 to 6.35 kg
- Sold by
- Pair
- Color
- High Visibility Yellow
- Return conditions
- No returnable if used. For more information about our return policy, please refer to the "Orders and Returns" link on the home page
- Caution
- Anchors not included
Specific References
- mpn
- 1726
You might also like
Comments (0)
No customer reviews for the moment.
8 other products in the same category:
This item is not kept in stock. Please allow 15 days for delivery.
Eagle wall protectors in high-visibility yellow high-density polyethylene (HDPE), sold in pairs. Energy-absorbing construction that resists cracking and chipping. 42 x 2 in, 6 or 10 in high; can be mounted end to end, anchors not included.