- New
Eagle HDPE corner protector, yellow, pair
PC1720
$234.25
This item is not kept in stock. Please allow 15 days for delivery.
Eagle corner protectors in high-visibility yellow high-density polyethylene (HDPE), sold in pairs. Energy-absorbing construction that resists cracking and chipping. 10 x 6 in, 21 or 42 in high; can be mounted end to end, anchors not included.
Return conditions:
No returnable if used. For more information about our return policy, please refer to the Orders and Returns.
Eagle HDPE corner protector, yellow, pair
Manufacturer code Eagle: 1720, model 1720
This item is not kept in stock. Please allow 15 days for delivery.
Available in 2 heights. Select the variant you need from the drop-down menu.
| Sylprotec code | Manufacturer code | Height |
| PC1720 | 1720 | 21 in |
| PC1725 | 1725 | 42 in |
Eagle corner protectors help prevent damage to wall corners in areas used by forklifts, hand trucks and other warehouse vehicles. Made of high-visibility yellow high-density polyethylene, their construction absorbs energy and resists cracking and chipping. Each protector measures 10 x 6 in, 21 or 42 in high, and they can be mounted end to end to cover a greater height. They are sold in pairs (set of 2 protectors); anchors are not included. Manufacturer: Eagle (Justrite Safety Group).
Features of the Eagle corner protectors
- High-density polyethylene (HDPE), high-visibility yellow
- Energy-absorbing construction, resists cracking and chipping
- 10 x 6 in, 21 or 42 in high
- Can be mounted end to end; anchors not included
- Sold in pairs (set of 2 protectors)
Applications of the Eagle corner protectors
Fastened to wall corners along warehouse, plant or dock aisles, Eagle corner protectors help prevent damage caused by forklifts, hand trucks and other warehouse vehicles. The 21 in model protects the lower part of the corner; the 42 in model covers a greater height.
Care of the Eagle corner protectors
Clean with soapy water. Periodically check that the anchors are tight. Replace the protector if it is split or deformed.
FAQ: the Eagle corner protectors
Is it sold individually or in pairs?
In pairs: Eagle corner protectors are sold in pairs (set of 2), and the weight shown is for the pair.
Are the anchors included?
No, anchors are not included; plan for anchors that suit your wall.
Which height should I choose?
The 21 in model (10 lb per pair) protects the lower part of the corner; the 42 in model (20 lb per pair) covers a greater height. The protectors can also be mounted end to end.
Is the protector likely to crack?
The manufacturer states that the HDPE resists cracking and chipping, and that the construction absorbs energy.
Where are the protectors made?
They are made in the United States by Eagle (Justrite Safety Group).
Suggestions for this Eagle corner protectors
For the building maintenance worker fastening these Eagle protectors to a wall corner near a dock door, plan for a Pioneer women's orange high-visibility vest (V136F) with nine pockets, TenActiv polyurethane-coated gloves (GS13TAGPU) to set the anchors with dexterity, SecureFit anti-fog safety glasses (YASF203) with amber lens, Classic earplugs (OA101) while drilling and a Moldex valved mask (R2300) against concrete dust.
Along the same wall, add the 42 in Eagle wall protector (PC1726) from the same range. Around columns, see the Eagle column protector in yellow (PC1708) or its orange (PC178OR) version. During installation, set out a 36 in orange cone (EPTCONE36) and mark the floor with a black non-slip adhesive warning tape (ECT748).
PC1720
Data sheet
- Product group
- Safety equipment
- Main category
- Industrial accessories
- Sub category
- Warehouse products
- Name of the product
- Corner protector
- Product code
- PC172X
- Sort by keywords
- Corner protectors
- Product use
- Prevents damage to wall corners in warehouse vehicle traffic areas
- Manufacturer
- Eagle
- Country of origin
- United State of America
- Features
- Energy-absorbing construction
- Additional Features
- Resists cracking and chipping
- Mounting type
- Can be mounted end to end
- Material
- High density polyethylene (HDPE)
- Length (in/cm)
- 10 in / 25.4 cm
- Width (in/cm)
- 6 in / 15.24 cm
- Height (in/cm)
- 21 to 42 in / 53.34 to 106.68 cm
- Weight (lb/kg)
- 10 to 20 lb / 4.54 to 9.07 kg
- Sold by
- Pair
- Color
- High Visibility Yellow
- Return conditions
- No returnable if used. For more information about our return policy, please refer to the "Orders and Returns" link on the home page
- Caution
- Anchors not included
Specific References
- mpn
- 1720
You might also like
Comments (0)
No customer reviews for the moment.
8 other products in the same category:
This item is not kept in stock. Please allow 15 days for delivery.
Eagle corner protectors in high-visibility yellow high-density polyethylene (HDPE), sold in pairs. Energy-absorbing construction that resists cracking and chipping. 10 x 6 in, 21 or 42 in high; can be mounted end to end, anchors not included.