- New
Kleton steel wire mesh partition panel, 1 ft high, blue
IGKD121
Made in Canada
$91.25
This item is not kept in stock. Please allow 15 days for delivery.
Kleton wire mesh partition panel in 10-gauge steel, 2 x 2 in welded mesh, blue. 1 ft high, 4 or 8 ft wide, with modular pre-drilled components. Hardware not included.
Return conditions:
No returnable if used. For more information about our return policy, please refer to the Orders and Returns.
Kleton steel wire mesh partition panel, 1 ft high, blue
Manufacturer code Kleton: KD121, model KD121
This item is not kept in stock. Please allow 15 days for delivery.
Available in 2 sizes. Select the variant you need from the drop-down menu.
| Sylprotec code | Manufacturer code | Size |
| IGKD121 | KD121 | 4 ft W X 1 ft H |
| IGKD120 | KD120 | 8 ft W X 1 ft H |
The 1 ft high Kleton wire mesh partition panel is part of the Kleton wire mesh partition and enclosure system. Made of 10-gauge steel with 2 x 2 in welded mesh, in blue, it is offered 4 or 8 ft wide; its modular components are pre-drilled. Note: this is a 1 ft high panel only, not a full-height panel; it stacks with the other panels of the partition. Hardware is not included: for each additional stacked panel, plan for 2 bolts and 2 nuts (4 ft panel) or 4 bolts and 4 nuts (8 ft panel). Made in Canada, it is covered by a 1-year limited warranty.
Features of the Kleton partition panel
- 10-gauge steel, 2 x 2 in welded wire mesh, blue
- 1 ft high, 4 or 8 ft wide
- Modular pre-drilled components
- Stacks with the other panels of the partition
- Hardware not included (2 or 4 bolts and nuts per additional stacked panel)
Applications of the Kleton partition panel
Kleton wire mesh partitions and enclosures are used to store tools, valuable stock or hazardous materials and to close off restricted areas, while keeping visibility, air flow, heat and light. The 1 ft high panel stacks with the other panels of the partition.
Care of the Kleton partition panel
Periodically check that the bolts between panels are tight. Replace any panel whose mesh is bent after an impact.
FAQ: the Kleton partition panel
Does this panel cover the full height of the partition?
No. It is only 1 ft high (4 x 1 ft or 8 x 1 ft) and stacks with the other panels of the partition.
Is the hardware included?
No. For each additional stacked panel, plan for 2 bolts and 2 nuts with the 4 ft panel, or 4 bolts and 4 nuts with the 8 ft panel.
How much does the panel weigh?
The 4 x 1 ft size weighs 10 lb and the 8 x 1 ft size weighs 21 lb.
How do I fill a gap at the end of the partition?
The Kleton adjustable filler panel, offered on a separate page, fills a 6 to 10 in gap at the end of the partition.
Where is the panel made and what is the warranty?
It is made in Canada and covered by a 1-year limited warranty.
Suggestions for this Kleton partition panel
For the inventory manager closing off a hazardous materials area with a Kleton wire mesh partition, plan for an economical fluorescent orange surveyor vest (VV57) with 11 pockets, an orange polyester traffic shirt (VV6990), ultra-thin TenActiv gloves (GS21TX) worn alone or as a liner, 3M OX safety glasses (YA12166) worn over prescription glasses and a 3M Optime 95 earmuff (OPH6A).
During assembly, mark off the area with a red “Danger” barricade tape (ECT3RE9). To close the partition, see the blue Kleton 4 x 7 ft heavy-duty swing doors (IGKD111); to fill a 6 to 10 in gap at the end of the partition, the blue adjustable filler panel (IGKD119); where a post meets a wall, the blue wall bracket (IGKD115), and to carry the panels, the Kleton universal posts (EDKD129), offered in yellow.
IGKD121
Data sheet
- Product group
- Safety equipment
- Main category
- Industrial accessories
- Sub category
- Warehouse products
- Name of the product
- Wire mesh partition panel
- Product code
- IGKD12X
- Sort by keywords
- Wire mesh panels
- Product use
- Wire mesh partitions and enclosures: tools, valuable stock, hazardous materials, restricted areas
- Manufacturer
- KLETON
- Country of origin
- Canada
- Features
- 2 x 2 in welded wire mesh, modular pre-drilled components
- Additional Features
- Keeps visibility, air flow, heat and light
- Mounting type
- Stackable 1 ft high panel
- Material
- 10-gauge steel
- Length (in/cm)
- Not published by the manufacturer
- Width (in/cm)
- 48 to 96 in / 121.92 to 243.84 cm
- Height (in/cm)
- 12 in / 30.4 cm
- Weight (lb/kg)
- 10 to 21 lb / 4.54 to 9.53 kg
- Sold by
- Unit
- Color
- Kleton blue
- Return conditions
- No returnable if used. For more information about our return policy, please refer to the "Orders and Returns" link on the home page
- Warranty
- 1-year limited warranty
- Caution
- Hardware not included: 2 (4 ft) or 4 (8 ft) bolts and nuts per additional stacked panel
Specific References
- mpn
- KD121
You might also like
Comments (0)
No customer reviews for the moment.
8 other products in the same category:
This item is not kept in stock. Please allow 15 days for delivery.
Kleton wire mesh partition panel in 10-gauge steel, 2 x 2 in welded mesh, blue. 1 ft high, 4 or 8 ft wide, with modular pre-drilled components. Hardware not included.