- New
This item is not stocked: allow 5 to 7 days for delivery.
Pack of 6 Brady 65965 clamp-on circuit breaker lockouts in red polypropylene. Extremely versatile, they work on a wide range of single-pole and internal-trip multi-pole 120/277 V breakers. The detachable cleat supplied expands the range of compatible breakers even further. Handy for equipping a team of electricians or locking out several circuits at once. Each pack contains 6 lockouts, made in the United States.
This item is not stocked: allow 5 to 7 days for delivery.
Brady model: 65965. This pack contains 6 red clamp-on lockouts that tighten onto a circuit breaker switch to hold it in the open position during maintenance. They work on a wide range of single-pole and internal-trip multi-pole 120/277 V breakers. A detachable cleat, included, expands the range of compatible breakers even further. The red polypropylene stays highly visible in the panel.
This pack of six clamp-on lockouts fits suitable 120/277 V breakers, depending on the handle geometry. The maximum switch width is 0.65 in. For 480/600 V applications and a maximum switch width of 1.5 in, the Brady 65966 provides a different size. Both configurations include a removable cleat. Select the lockout according to circuit voltage and handle geometry.
| Characteristic | Value |
|---|---|
| Height | 0.95 in / 2.41 cm |
| Length / depth | 2.2 in / 5.6 cm |
| Width | 1 in / 2.54 cm |
| Published model dimensions (H X W X D) | 0.95 in H X 2.205 in W X 1.0 in D |
| Packaged dimensions | 5 X 1 X 3 in |
| Packaged weight | 0.2 lb / 0.09 kg |
| Main material | Polypropylene |
| Manufacturer | Brady |
| Country of origin | United State of America |
| Sold by | Pack of 6 units |
| Characteristic | For single-pole and internal-trip multi-pole breakers |
Open the circuit breaker according to your written procedure. Place the lockout on the switch, add the detachable cleat if the breaker shape requires it, tighten the clamp, then apply your padlock and your lockout tag. Verify the absence of voltage before starting work. Replace any lockout that is cracked or no longer clamps firmly.
The thumbwheel tightens the clamp onto the handle without a screwdriver. The flip cover then covers the thumbwheel and accepts the padlock to prevent loosening. Keep the included removable cleat with the device: it adapts the grip to certain breaker configurations. Before preparing the six lockouts for a job, compare the handle shape and width with the capacity of the selected model. The stated voltage alone does not establish mechanical compatibility with every breaker in a panel. Check that the attachment is retained correctly, then follow the applicable isolation and verification procedure.
Six lockouts.
A wide range of single-pole and internal-trip multi-pole 120/277 V breakers.
It is included and expands the range of breakers on which the lockout can be installed.
Red polypropylene; they are made in the United States.
The pack is not stocked: allow 5 to 7 days for delivery.
For the team locking out several breakers at once, depending on the hazards of the job, plan for 3M SecureFit safety glasses (YASF401), Ansell HyFlex foam nitrile gloves (G11800), Pioneer FR-Tech navy blue flame-retardant cargo pants (V7762), Moldex Meteors uncorded earplugs (OA6870) and a Pioneer cotton coverall (V5133).
For personal lockout, the padlock (CA1ZKD1) model with a Zenex body and nylon shackle provides a keyed-different option. If your procedure instead calls for an aluminium body, select the red model (CA1ARG) with a 1/4 in shackle, checking its fit in the device. Complete the identification with the tags (CAET5) bearing the French DANGER NE PAS OPÉRER message. These accessories complement the workstation’s lockout program; padlocks are not included with the device.
Data sheet
Specific References
You might also like