- New
This item is not stocked: allow 5 to 7 days for delivery.
Brady 65387 snap-on circuit breaker lockout in red nylon, sold individually. It fits onto the switch of a 120 V circuit breaker with holes in its switch tongue and keeps it in the open position during equipment maintenance. Its dual cavities accommodate switch tongues of different sizes. Use it on a compatible handle as part of the applicable energy-isolation and verification procedure. Its red nylon is easy to spot in the panel.
This item is not stocked: allow 5 to 7 days for delivery.
Brady model: 65387. This snap-on device isolates and secures a circuit breaker switch to protect workers against electrical accidents during equipment maintenance. It is designed for 120 V breakers with holes in the switch tongue. Its dual cavities accommodate switch tongues of different sizes, so the same model can be used on several breakers in a panel. Its red nylon is easy to spot in the panel.
The Brady 65387 is intended for electricians and maintenance teams who lock out the 120 V circuits of a distribution panel: lighting, outlets, small motors or building equipment. For single-pole and internal-trip multi-pole breakers, see the Brady clamp-on circuit breaker lockouts (CAC65965), pack of 6 instead.
| Characteristic | Value |
|---|---|
| Height | 1.2 in / 3 cm |
| Length / depth | 2.14 in / 5.44 cm |
| Width | 0.33 in / 0.84 cm |
| Published model dimensions (H X W X D) | 1.19 in H X 2.14 in W X 0.33 in D |
| Packaged dimensions | 8 X 0.5 X 4 in |
| Packaged weight | 0.03 lb / 0.01 kg |
| Main material | Nylon |
| Secondary material | Steel (four pins) |
| Manufacturer | Brady |
| Country of origin | China |
| Sold by | Unit |
| Characteristic | Dual cavities for different size switch tongues |
Open the circuit breaker according to your written procedure. Choose the cavity that matches the switch tongue, snap the device on, then apply your padlock and your lockout tag. Verify the absence of voltage before starting work. Replace the device if it is cracked or no longer holds firmly on the switch.
The two cavities let you select the fit that matches the switch tongue, but they do not make the lockout suitable for a handle without holes. Check this requirement before selecting the snap-on model. The device accepts one padlock with a maximum shackle diameter of 0.281 in. The padlock is separate from the lockout and holds it in place once installed. When comparing this model with a clamp-on device, consider the attachment method and the actual handle shape rather than circuit voltage alone. Follow the applicable energy-isolation and verification sequence before starting maintenance. A compatible handle is necessary for the lockout to perform its intended mechanical function.
For 120 V circuit breakers with holes in the switch tongue. Its dual cavities accommodate switch tongues of different sizes.
Yes. The device blocks the switch, and the worker's padlock prevents its removal.
Red nylon, according to the technical data.
Individually.
The device is not stocked: allow 5 to 7 days for delivery.
For maintenance of equipment fed by a 120 V breaker, depending on the hazards of the job, plan for 3M Virtua Max foam-sealed safety glasses (YA11872), Superior Touch nylon knit gloves (GS13BKPUQ) with polyurethane coating, Pioneer FR-Tech navy blue flame-retardant cargo pants (V7762), 3M UltraFit corded earplugs (OA4004) and a Pioneer cotton coverall (V5133).
For personal lockout, the padlock (CA1ZKD1) model with a Zenex body and nylon shackle provides a keyed-different option. If your procedure instead calls for an aluminium body, select the red model (CA1ARG) with a 1/4 in shackle, checking its fit in the device. Complete the identification with the tags (CAET5) bearing the French DANGER NE PAS OPÉRER message. These accessories complement the workstation’s lockout program; padlocks are not included with the device.
Data sheet
Specific References
You might also like