- New
This item is not stocked: allow 5 to 7 days for delivery.
Brady 65560 red gate valve lockout for 1 to 2.5 in (2.54 to 6.35 cm) diameter valve wheels. It covers the wheel of the closed valve to prevent it from being turned during maintenance. Made of extremely rugged injection-molded polypropylene, it resists impacts and chemicals. It accepts a padlock shackle up to 3/8 in and is supplied with English, Spanish and French danger labels.
This item is not stocked: allow 5 to 7 days for delivery.
Brady model: 65560. This device completely covers the wheel of a closed gate valve: no one can turn it as long as the worker's personal padlock and tag are in place. It fits 1 to 2.5 in (2.54 to 6.35 cm) diameter valve wheels. Its extremely rugged injection-molded polypropylene offers superior impact and chemical resistance. It carries the DANGER LOCKED OUT DO NOT REMOVE legend and comes with English, Spanish and French danger labels.
The Brady 65560 is intended for pipefitters, mechanics and operators who isolate a water, steam, chemical or gas line before a repair or cleaning. For larger wheels, Brady offers the same red device in the next size up: the Brady red gate valve 65561 (CAV65561). Other colours are available to follow your own colour code.
| Characteristic | Value |
|---|---|
| Height | 3.15 in / 80 mm |
| Length / depth | 4.7 in / 12 cm |
| Width | 1.41 in / 3.58 cm |
| Published model dimensions (H X W X D) | 3.15 in H X 4.72 in W X 1.41 in D |
| Packaged dimensions | 9.24 X 3.36 X 7.44 in |
| Packaged weight | 1.6 lb / 0.726 kg |
| Main material | Polypropylene |
| Secondary material | Steel (hinge rivet) |
| Manufacturer | Brady |
| Country of origin | China |
| Sold by | Unit |
| Characteristic | For 1 to 2.5 in diameter gate valve wheels |
| Technical details | Labels in English, French and Spanish |
Close the valve according to your written procedure and bleed the downstream pressure if the procedure requires it. Place the device over the wheel, close it, apply your personal padlock, then your lockout tag. Verify that the line is properly isolated before starting. Rinse the device if it has been in contact with a product and replace it if it is cracked.
This model accepts one padlock with a maximum shackle diameter of 3/8 in. Its knockout center accommodates a rising-stem OS&Y valve; the published center opening is 0.75 in. Check the wheel diameter, stem shape and available clearance before selecting the device. The personal padlock and lockout tag are separate from the danger labels supplied with the housing. Their presence does not replace verification of line isolation under your procedure.
Gate valves with a wheel diameter of 1 to 2.5 in (2.54 to 6.35 cm).
A shackle up to 3/8 in (9.5 mm) in diameter.
Yes, English, Spanish and French danger labels are supplied.
Yes, its injection-molded polypropylene offers superior impact and chemical resistance, according to the manufacturer.
The device is not stocked: allow 5 to 7 days for delivery.
For the pipefitter closing a line before cleaning, depending on the hazards of the job, plan for Jackson Safety Nemesis safety glasses (YA3297), Ansell HyFlex nylon and PU gloves (G11601), a Pioneer long-sleeve orange flame-resistant shirt (V339), regular uncorded disposable earplugs (OA1250) and Milwaukee gel kneepads (VG107).
For personal lockout, select the Master Lock 406 keyed-different padlock with a nylon (CA1ZKD1) shackle according to the isolation point requirements. The American Lock A1106RED aluminum (CA1ARG) padlock, with a 1/4 in boron steel shackle, provides another option. Complete the identification with the tags (CAET5) bearing the French DANGER NE PAS OPÉRER message. Check the shackle diameter and the fit in the device before selecting accessories; these items are sold separately and are used as part of your lockout procedure.
Data sheet
Specific References
You might also like