- New
This item is not stocked: allow 14 to 17 days for delivery.
Brady 65590 yellow gate valve lockout for 1 to 2.5 in (2.54 to 6.35 cm) diameter valve wheels. It covers the wheel of the closed valve to prevent it from being turned during maintenance. Made of extremely rugged injection-molded polypropylene, it resists impacts and chemicals. It accepts a padlock shackle up to 3/8 in and is supplied with English, Spanish and French danger labels.
This item is not stocked: allow 14 to 17 days for delivery.
Brady model: 65590. This yellow device covers the wheel of a closed gate valve: no one can turn it as long as the worker's personal padlock and tag are in place. It fits 1 to 2.5 in (2.54 to 6.35 cm) diameter valve wheels. Its extremely rugged injection-molded polypropylene offers superior impact and chemical resistance. It carries the DANGER LOCKED OUT DO NOT REMOVE legend and comes with English, Spanish and French danger labels.
The Brady 65590 is intended for pipefitters, mechanics and operators who isolate a small line before a repair or cleaning and who distinguish their devices by colour according to their own procedure. For larger wheels, Brady offers the same yellow device in the next size up: the Brady yellow gate valve 65591 (CAV65591).
| Characteristic | Value |
|---|---|
| Height | 3.15 in / 80 mm |
| Length / depth | 4.7 in / 12 cm |
| Width | 1.41 in / 3.58 cm |
| Published model dimensions (H X W X D) | 3.15 in H X 4.72 in W X 1.41 in D |
| Packaged dimensions | 4.8 X 1.32 X 3.0 in |
| Packaged weight | 0.13 lb / 0.059 kg |
| Main material | Polypropylene |
| Secondary material | Steel (hinge rivet) |
| Manufacturer | Brady |
| Country of origin | China |
| Sold by | Unit |
| Characteristic | For 1 to 2.5 in diameter gate valve wheels |
| Technical details | Labels in English, French and Spanish |
Close the valve according to your written procedure and bleed the downstream pressure if the procedure requires it. Place the device over the wheel, close it, apply your personal padlock, then your lockout tag. Verify that the line is properly isolated before starting. Rinse the device if it has been in contact with a product and replace it if it is cracked.
This model accepts one padlock with a maximum shackle diameter of 3/8 in. Its knockout center accommodates a rising-stem OS&Y valve; the published center opening is 0.75 in. Check the wheel diameter, stem shape and available clearance before selecting the device. The personal padlock and lockout tag are separate from the danger labels supplied with the housing. Their presence does not replace verification of line isolation under your procedure.
Gate valves with a wheel diameter of 1 to 2.5 in (2.54 to 6.35 cm).
A shackle up to 3/8 in (9.5 mm) in diameter.
Yes, English, Spanish and French danger labels are supplied.
To distinguish your devices according to your own colour code, for example by team, by shift or by type of line.
The device is not stocked: allow 14 to 17 days for delivery.
For the pipefitter colour-coding isolation points, depending on the hazards of the job, plan for 3M Virtua Max foam-sealed safety glasses (YA11872), Ansell HyFlex Dyneema Diamond gloves (GL11518), an orange high-visibility flame-resistant Pioneer shirt (V339), PELTOR 3M behind-the-head earmuffs (OPH7B) and Impacto gel-filled kneepads (VG103).
For personal lockout, select the Master Lock 406 keyed-different padlock with a nylon (CA1ZKD1) shackle according to the isolation point requirements. The American Lock A1106RED aluminum (CA1ARG) padlock, with a 1/4 in boron steel shackle, provides another option. Complete the identification with the tags (CAET5) bearing the French DANGER NE PAS OPÉRER message. Check the shackle diameter and the fit in the device before selecting accessories; these items are sold separately and are used as part of your lockout procedure.
Data sheet
Specific References
You might also like