- New
This item is not stocked: allow 28 to 35 days for delivery.
Justrite KDD442 lockout device from the Stopout line, in red plastic, designed for 3/8 to 1-1/4 in ball valves with a handle up to 5/8 in wide and 1/4 in thick. The instructions show installation with the valve in the open or closed position. The worker locks it with a personal padlock and attaches a lockout tag to it. Sold individually.
This item is not stocked: allow 28 to 35 days for delivery.
Justrite model: KDD442, Stopout line. A ball valve closes with a quarter turn: during maintenance of a line, no one must be able to reopen it. This red plastic ball-type valve lockout fits over the handle and accepts the worker's personal padlock; the manufacturer's instructions show installation with the valve in the open or closed position. The tag identifies the worker and marks the lockout; actual line isolation must be verified under the applicable procedure.
The Justrite KDD442 is intended for pipefitters, maintenance mechanics and operators who isolate a liquid, gas or compressed air line before a repair, cleaning or part replacement. For handwheel gate valves, the same Stopout line includes the Justrite Stopout gate valve KDD470 (CAVKDD470). Before ordering, check the valve size and the width and thickness of its handle.
| Characteristic | Value |
|---|---|
| Height of package | 3.3 in / 8.38 cm |
| Length / depth of package | 5.5 in / 14 cm |
| Width of package | 4 in / 10.16 cm |
| Published model dimensions | 3.125 X 4.5 X 4.5 in |
| Packaged dimensions | 5.5 X 4 X 3.3 in |
| Packaged weight | 0.17 lb / 0.077 kg |
| Published packaged weight | 0.172 lb |
| Main material | Plastic |
| Secondary material | Steel (pin) |
| Manufacturer | Justrite |
| Country of origin | China |
| Sold by | Unit |
| Characteristic | For ball-type valves |
Close the valve according to your written procedure and bleed the downstream pressure if the procedure requires it. Fit the device over the handle in the position set by your procedure, lock it with your padlock, then attach your lockout tag. Verify that the line is properly isolated before starting. Keep the device clean and replace it if it is cracked or deformed.
For ball-type valves.
Valves from 3/8 to 1-1/4 in, with a handle up to 5/8 in wide and 1/4 in thick.
The manufacturer's instructions show both setups: valve in the open position and valve in the closed position.
It is sold individually, without a padlock. It is locked with the worker's personal padlock; add a lockout tag.
The device is not stocked: allow 28 to 35 days for delivery.
For the pipefitter isolating a line before a repair, depending on the hazards of the job, plan for Bollé Safety Rush+ clear glasses (YRUSHPPSI), Ansell HyFlex Dyneema Diamond gloves (GL11518), a Pioneer women's royal blue flame-resistant coverall (V7704F), MAX LITE disposable earplugs (OA1102) and Impacto kneepads (VG104) with a foam lining.
For personal lockout, select the Master Lock 406 keyed-different padlock with a nylon (CA1ZKD1) shackle according to the isolation point requirements. The American Lock A1106RED aluminum (CA1ARG) padlock, with a 1/4 in boron steel shackle, provides another option. Complete the identification with the tags (CAET5) bearing the French DANGER NE PAS OPÉRER message. Check the shackle diameter and the fit in the device before selecting accessories; these items are sold separately and are used as part of your lockout procedure.
Data sheet
Specific References
You might also like