- New
This item is not stocked: allow 21 to 28 days for delivery.
Justrite KDD471 lockout device from the Stopout line, in red plastic, for 2.5 to 5 in gate valve wheels. It fits over the wheel of the closed valve to prevent it from being turned during maintenance of a water, steam or product line. It accepts 3 padlocks; add a lockout tag. A model for a smaller wheel is offered on a separate listing. Sold individually.
This item is not stocked: allow 21 to 28 days for delivery.
Justrite model: KDD471, Stopout line. When a gate valve isolates a line during maintenance, its wheel must not be turned. This red plastic device fits over a 2.5 to 5 in wheel of the closed valve and accepts 3 padlocks. Together with a lockout tag, it clearly shows that the line is isolated and who is working on the equipment.
The Justrite KDD471 is intended for pipefitters, maintenance mechanics and plant operators who isolate a line before a repair, cleaning or part replacement. For a smaller wheel, the same line includes the Justrite Stopout small gate valve wheel device (CAVKDD470).
| Characteristic | Value |
|---|---|
| Height of package | 5.5 in / 14 cm |
| Length / depth of package | 6.8 in / 17.27 cm |
| Width of package | 1.8 in / 4.57 cm |
| Published model dimensions | 5.5 X 2 in |
| Packaged dimensions | 6.8 X 1.8 X 5.5 in |
| Packaged weight | 0.56 lb / 0.254 kg |
| Published packaged weight | 0.558 lb |
| Main material | Plastic |
| Manufacturer | Justrite |
| Country of origin | China |
| Includes | “Danger Locked Out” label |
| Sold by | Unit |
| Characteristic | For gate valve handles |
Close the valve according to your written procedure and bleed the downstream pressure if the procedure requires it. Fit the device over the wheel, lock it with your padlock, then attach your lockout tag. Verify that the line is properly isolated before starting. Keep the device clean and replace it if it is cracked or deformed.
For gate valves with a 2.5 to 5 in wheel.
It accepts 3 padlocks; add a lockout tag.
The Justrite KDD470 (CAVKDD470) from the same Stopout line fits 1 to 2.5 in wheels.
Individually.
The device is not stocked: allow 21 to 28 days for delivery.
For the plant operator isolating a line, depending on the hazards of the job, plan for Privo safety glasses (YA12261) with clear polycarbonate lenses, Dexterity Kevlar blended-knit gloves (GS13KFNT) with foam nitrile coating, a Pioneer long-sleeve orange flame-resistant shirt (V339), 32 dB Taper-Fit uncorded disposable earplugs (OA1250) and Ultra Flex III hinged kneepads (VG106).
For personal lockout, select the Master Lock 406 keyed-different padlock with a nylon (CA1ZKD1) shackle according to the isolation point requirements. The American Lock A1106RED aluminum (CA1ARG) padlock, with a 1/4 in boron steel shackle, provides another option. Complete the identification with the tags (CAET5) bearing the French DANGER NE PAS OPÉRER message. Check the shackle diameter and the fit in the device before selecting accessories; these items are sold separately and are used as part of your lockout procedure.
Data sheet
Specific References
You might also like