3M N95 NIOSH approved filter for filter retainer 501 and 3M 6000 series cartridges. 10 units/box.


Return conditions : No returnable if used. For more information about our return policy, please refer to the "Orders and Returns" link on the home page

3M N95 NIOSH 42 CFR 84 approved filter compatible with 3M 6000 series cartridges. This filter must be used with a cartridge and a 3M R501 filter retainer (cartridge and retainer not included). 10 units/box, 10 boxes/case.

This filter is made of a patented electrostatically charged microfiber. It is certified N95 which means it protects the user from 95% of solid, liquid and non-oil based particles in the air The letter "N" stands for "non-resistant" to oil based particles; one must thus avoid oily environment with that type of respirator.

Use for:
These filters are recommended for applications with non-oil based pesticides spraying, agriculture, spray paint, petrochemical and chemical manufacturing, varnishing, paper treatment and laboratory work.

Biological particles:
These filters help prevent the inhalation of certain airborne biological particles like mold, Bacillus anthracis (Anthrax), Mycobacterium tuberculosis (Koch's bacillus) the main causative agent of tuberculosis, pandemic flues (H5N1, H1N1), etc. However, it cannot eliminate the risk of contracting infection, illness or disease. Due to the nature of some contaminants, the exposure limit value of some products and byproducts haven’t been quantified by governmental agencies, thus wearing a respirator doesn’t necessarily protects you.

Do not use for:
Do not use on a beard and other facial hair or if the user suffers from a condition that prevents him from having direct contact with the respirator’s sides. One should never use a respirator regardless of the type of cartridge in use whenever concentrations of gases and vapours exceed 10 times the admissible limit set by the CNESST or any other regulation applicable. Avoid sandblasting and oxygen deprived environments (an atmosphere with less than 19,5 % oxygen).

Maintenance and service life:
Since this is a disposable product, there is no maintenance. Whenever it gets hard to breath, it is time to change them. The manufacturer’s limitations must be followed.

Type of productSafety equipment
Main categoryPersonal protection
Sub categoryRespiratory protection
Sub sub category3M respirators and cartridges
Name of the productN95 filters
Series of productsFor 7800S, FF-400, 7000, 5000, 7500, 6500, 6000 series respirators
Product codeR5N11
Approved/CertifiedMeets NIOSH N95
Country of originUnited State of America
Maintenance freeDisposable product
Type of connectionBayonet type connector
Aerosol TypeNot-oily
Protection against gases and vaporsN95 - Not resistant to oily particles
Compatibility with the mask screen used for weldingCompatible with the mask screen used for welding
Useful life1825 Days
Not washableIt is best to replace this item when it is too contaminated, worn or soiled. Do not attempt to wash it
Length (in/cm)4.5 in / 11.43 cm
Width (in/cm)3.75 in / 9.525 cm
Height (in/cm)3.5 in / 9 cm
Weight (lb/kg)0.14 lb / 0.06 Kg
Sold byBox of 10 units
Another packaging available1By the case of 10 box (100 units-50 pairs)
Another packaging available2110 case per pallet (11000 units-5500 pairs)
Return conditionsNo returnable if used. For more information about our return policy, please refer to the "Orders and Returns" link on the home page


30 other products in the same category: