compare_arrows
3M Quick Latch NIOSH approved respirator. Lightweight and comfortable. Filter & cartridge not included. Small
search
  • 3M Quick Latch NIOSH approved respirator. Lightweight and comfortable. Filter & cartridge not included. Small
3M

3M Quick Latch NIOSH approved respirator Lightweight and comfortable. Filter & cartridge not included. Small

R6501QL
$37.20
Quantity

Return conditions:

No returnable if used. For more information about our return policy, please refer to the Orders and Returns.

3M 6500 series NIOSH 42 CFR 84 approved half facepiece respirator for respiratory protection. Compatible with 3M filters series 2000, 2200, 5000 and 7000; 3M cartridges series 6000; and P100 cartridge/filters. Filters and cartridges sold separately. This code is for the small size respirator. Sold individually. 10 units/case.

This half facepiece is made of nylon and the faceseal is made of silicone. The head harness is equipped with four ajustable Spandex and polyester head straps. This half facepiece has been design to facilitate work with its low position on the bridge of the nose and the fact that it is lightweight and allows one to wear safety glasses and still be comfortable. None of the components contain natural rubber latex. Moreover, the 6500 series respirators feature a Quick Latch mecanism which is very convenient and a Cool Flow valve which facilitate breathing. The Quick Latch mecanism allows one to unhinge its respirator without removing the whole device. It is particularly useful for workers wearing a hard hat which proves itself cumbersome to remove everytime one wants to take off its respirator. The facepiece drops to the neck once the mechanism is unlatched.

Use for:
This type of respiratory protection is recommended for work that will loosen solid or liquid particles in the air and/or for work in an environment where air contains contaminants and/or biological particles. One must of course adapt its filtering system with the right filtres or cartridges to be properly protected.

Do not use for:
Do not use on a beard and other facial hair or if the user suffers from a condition that prevents him from having direct contact with the respirator’s sides. The use of respirators is not recommended for people with compromised respiratory system or problem such as asthma or emphysema.

It is strongly discouraged to wear a respirator for application with sandblasting. It is also highly advised to stay away from environment that exceed 10 times the permissible exposure limit set by the CNESST or any other government regulation applicable.

One should never use a respirator in an oxygen deprevated environment (an atmosphere with less than 19,5 % oxygen).

Maintenance and service life:
3M half facepiece respirators 6000 series are reusable, provided that its maintenance and storage is done according to the manufacturer’s rules. 3M recommends an inspection of the respiratory equipment before each use; to wash the respirator after each use; and to store the respirator back to its packaging. One should never wash its respirator with any type of solvents since they can weaken some components which can affect the efficiency of the equipment. One must always remove the cartridges or filters from the respirator before storing it.

At Sylprotec, we believe this respirator is not easily dismantled compared to 3M series 7500 respirators, thus it is difficult to clean. If your line of work requires you wearing a respirator, we definately suggest you opt for a 7500 series respirator.

Other sizes are available in the menu below this page.

R6501QL

Data sheet

Type of product
Safety equipment
Main category
Personal protection
Sub category
Respiratory protection
Sub sub category
3M respirators and cartridges
Name of the product
Half-mask type respirator
Series of products
6500QL series respirator
Product code
R6501QL
Approved/Certified
Meets NIOSH
Manufacturer
3M
Country of origin
United State of America
Choice of format
Small, medium , large
Reusable
Reusable with prior hygienic measurement
Type of connection
Bayonet type connector
Protection factor
Protection factor of 10
Respirator size
Small size
Cartridge or Filter Included
Filter element not Include
Includes natural rubber latex components
Does not contain latex
Contains a braided strap for comfort
Contains a braided strap (large)
Contains adjustable buckle straps
Contains adjustable buckles
Exhalation valve
Contains a Cool flow valve (Tm) 3M (Tm)
Compatibility with the mask screen used for welding
Compatible with the mask screen used for welding
Sliding straps
Sliding straps
Inhalation valve
Contains two inhalation valves
Phonic membrane
Without phonic membrane
Type of harness
4 attachment points
Material1
Silicone
Material2
Nylon
Material3
Elastic
Washable
Wash in warm water, 140°F/60°C with a mild soap (hand dish soap), rinse and disinfect with a Dakin solution (water with bleach), rinse thoroughly and let dry
Length (in/cm)
9 in / 22.8 cm
Width (in/cm)
7 in / 17.8 cm
Height (in/cm)
4.5 in / 11.4 cm
Weight (lb/kg)
0.5 lb / 0.22 Kg
Sold by
Unit
Color
Grey/bleue teal
Another packaging available1
Box of 10
Another packaging available2
42 cases per pallet (420 units)
Return conditions
No returnable if used. For more information about our return policy, please refer to the "Orders and Returns" link on the home page
New

Download

barbes et moustaches compatibles

barbes et moustaches compatibles_en

Download (850.88KB)

You might also like