compare_arrows
  • New
3M Secure Click Particulate Filter D3096, P100, Acid Gas
search
  • 3M Secure Click Particulate Filter D3096, P100, Acid Gas

3M Secure Click Particulate Filter D3096, P100, Acid Gas

RD3096
$21.80

3M Secure Click Particulate Filter D3096, P100, Acid Gas

3M Secure Click Particulate Filter D3096, P100, Acid Gas. NIOSH approved, class P100. Sold as: pair (2 filters). Attaches only to the Secure Click HF-800 reusable half-mask (RHF80XSD) and the Secure Click FF-800 reusable full facepiece (RFF800).

Quantity

Return conditions:

No returnable if used. For more information about our return policy, please refer to the Orders and Returns.

3M Secure Click Particulate Filter D3096, P100, Acid Gas

3M manufacturer code: 7100213425, model D3096

This filter from the 3M Secure Click range carries the full name « 3M Secure Click Particulate Filter D3096, P100, with Nuisance Level Acid Gas Relief ». It offers: NIOSH class P100; nuisance level acid gases relief (3M recommendation). Sold as: pair (2 filters).

It attaches exclusively to 3M Secure Click facepieces: the Secure Click HF-800 reusable half-mask (RHF80XSD) and the Secure Click FF-800 reusable full facepiece (RFF800).

Key features of the 3M Secure Click D3096

  • NIOSH class: P100
  • Nuisance levels (3M recommendation): acid gases
  • Secure Click connection: clicks onto HF-800 and FF-800 facepieces
  • Sold as: Pair (2 filters)
  • Weight: 0.040 lb (18 g) per filter

Secure Click compatibility

3M Secure Click facepieces only: HF-800 half facepieces (HF-801, HF-802, HF-803, HF-801SD, HF-802SD, HF-803SD) and FF-800 full facepieces (FF-801, FF-802, FF-803).

Limitations and safe use

  • NIOSH approved with 3M Secure Click facepieces. Do not use in atmospheres immediately dangerous to life or health (IDLH) or in oxygen-deficient atmospheres.
  • Nuisance levels: concentrations that do not exceed the OSHA permissible exposure limit (PEL) or the lowest applicable exposure limit. This relief is a 3M recommendation, without NIOSH approval for these gases and vapours.
  • Use within a respiratory protection program that meets CSA Z94.4; read the 3M user instructions before use.

Filter replacement

Replace the filters when they are damaged, soiled or when breathing becomes difficult. Always replace both filters at the same time.

Technical specifications

Product codeRD3096
Manufacturer3M
ApprovalNIOSH approved, class P100
Sold asPair (2 filters)
Weight0.040 lb (18 g) per filter
Country of originUnited States

FAQ about the 3M Secure Click D3096

Which facepieces does it fit?

Only with 3M Secure Click facepieces: HF-800 half facepieces and FF-800 full facepieces.

What does it protect against?

Particulates, NIOSH class P100. Nuisance level acid gases relief, per the 3M recommendation (not NIOSH approved).

How is it sold?

Sold as: Pair (2 filters).

When should the filter be replaced?

When it is damaged, soiled or when breathing becomes difficult.

What does the NIOSH class mean?

N means not resistant to oil, P means oil resistant; 95 or 100 indicates filtration efficiency.

Complementary suggestions for respiratory protection

For sanding, grinding or sawing where particles are the main hazard, complete your equipment with safety eyewear (YA3298), noise-reducing earplugs (OA1101), a disposable hood (VF1410), reusable gloves (G519) and disposable gloves (GL7005).

This filter is used with Secure Click facepieces: the Secure Click HF-800 reusable half-mask (RHF80XSD) and the Secure Click FF-800 reusable full facepiece (RFF800), as well as other products in the same range: the D3097 P100 filter with nuisance level organic vapour relief (RD3097), the D8002 acid gas cartridge (RD8002) and the D3078 P95 filter with nuisance level organic vapour and acid gas relief (RD3078).

The texts coloured in green correspond to hyperlinks leading to specific safety equipment or to a general information link.

RD3096

Data sheet

Product group
Safety equipment
Main category
Personal protection
Sub category
Respiratory protection
Sub sub category
3M respirators and cartridges
Name of the product
P100 particle filters
Product code
RD3096
Product use
Particulate filter
Approved/Certified
NIOSH approved, class P100
Manufacturer
3M (TM)
Country of origin
United State of America
Feature that facilitates use
Clicks onto Secure Click HF-800 and FF-800 facepieces (audible click)
Type of connection
Secure Click connection
Nuisance Odour Relief (< OSHA PEL)
Nuisance levels (3M recommendation): acid gases
Protection against gases and vapors
Protects against: particulates (P100)
Cartridge color code
Magenta
Length (in/cm)
4.8 in / 12.19 cm
Width (in/cm)
1.8 in / 4.5 cm
Height (in/cm)
5 in / 12.7 cm
Weight (lb/kg)
0.04 lb / 0.018 kg
Sold by
Pair (2 filters)
HS Code
5911900000
Return conditions
No returnable if used. For more information about our return policy, please refer to the "Orders and Returns" link on the home page

Download

directives_D3000_P100

User instructions - Secure Click D3000 P100 filters (3M)

Download (293.32KB)

guide_selection_respirateurs_FR

3M respirator selection guide (French)

Download (3.7MB)

guide_selection_respirateurs_EN

3M respirator selection guide (English)

Download (824.97KB)

You might also like

Comments (0)
No customer reviews for the moment.