compare_arrows
  • New
3M Secure Click Acid Gas Cartridge D8002
search
  • 3M Secure Click Acid Gas Cartridge D8002

3M Secure Click Acid Gas Cartridge D8002

RD8002
Made in Canada
$29.80

3M Secure Click Acid Gas Cartridge D8002

3M Secure Click Acid Gas Cartridge D8002. NIOSH approved; sulfur dioxide, hydrogen chloride, chlorine, chlorine dioxide, hydrogen fluoride, hydrogen sulfide. Sold as: pair (2 cartridges). Attaches only to the Secure Click HF-800 reusable half-mask (RHF80XSD) and the Secure Click FF-800 reusable full facepiece (RFF800).

Quantity

Return conditions:

No returnable if used. For more information about our return policy, please refer to the Orders and Returns.

3M Secure Click Acid Gas Cartridge D8002

3M manufacturer code: 7100280813, model D8002

This cartridge from the 3M Secure Click range carries the full name « 3M Secure Click Acid Gas Cartridge D8002 ». It offers: NIOSH approved against: sulfur dioxide, hydrogen chloride, chlorine, chlorine dioxide, hydrogen fluoride, hydrogen sulfide. Sold as: pair (2 cartridges).

It attaches exclusively to 3M Secure Click facepieces: the Secure Click HF-800 reusable half-mask (RHF80XSD) and the Secure Click FF-800 reusable full facepiece (RFF800).

Key features of the 3M Secure Click D8002

  • Approved gases and vapours: sulfur dioxide, hydrogen chloride, chlorine, chlorine dioxide, hydrogen fluoride, hydrogen sulfide
  • Secure Click connection: clicks onto HF-800 and FF-800 facepieces
  • Sold as: Pair (2 cartridges)

Secure Click compatibility

3M Secure Click facepieces only: HF-800 half facepieces (HF-801, HF-802, HF-803, HF-801SD, HF-802SD, HF-803SD) and FF-800 full facepieces (FF-801, FF-802, FF-803).

Limitations and safe use

  • NIOSH approved with 3M Secure Click facepieces. Do not use in atmospheres immediately dangerous to life or health (IDLH) or in oxygen-deficient atmospheres.
  • Establish a cartridge change schedule and replace the cartridges no later than when the odour or taste of the contaminant is detected.
  • Use within a respiratory protection program that meets CSA Z94.4; read the 3M user instructions before use.

Cartridge replacement

Establish a change schedule based on the contaminants and concentrations at the workstation. Replace both cartridges at the same time, no later than when the odour or taste of the contaminant is detected.

Technical specifications

Product codeRD8002
Manufacturer3M
ApprovalNIOSH approved; sulfur dioxide, hydrogen chloride, chlorine, chlorine dioxide, hydrogen fluoride, hydrogen sulfide
Sold asPair (2 cartridges)
Country of originCanada

FAQ about the 3M Secure Click D8002

Which facepieces does it fit?

Only with 3M Secure Click facepieces: HF-800 half facepieces and FF-800 full facepieces.

What does it protect against?

NIOSH approved against: sulfur dioxide, hydrogen chloride, chlorine, chlorine dioxide, hydrogen fluoride, hydrogen sulfide.

How is it sold?

Sold as: Pair (2 cartridges).

When should the cartridge be replaced?

According to the change schedule set for the workstation, no later than when the odour or taste of the contaminant is detected.

Can I use it in an IDLH atmosphere?

No. Do not use in an atmosphere immediately dangerous to life or health or in an oxygen-deficient atmosphere.

Complementary suggestions for respiratory protection

For workers exposed to gases and vapours, complete respiratory protection with reusable gloves (GL9298), safety eyewear (YAU0112), disposable protective coveralls (VQC127SYL), disposable gloves (GL7007) and noise-reducing earmuffs (OPH6A).

This cartridge is used with Secure Click facepieces: the Secure Click HF-800 reusable half-mask (RHF80XSD) and the Secure Click FF-800 reusable full facepiece (RFF800), as well as other products in the same range: the D8001 organic vapour cartridge (RD8001), the D3071 P95 dust and particulate filter (RD3071) and the D8003 organic vapour and acid gas dual flow cartridge (RD8003).

The texts coloured in green correspond to hyperlinks leading to specific safety equipment or to a general information link.

RD8002

Data sheet

Product group
Safety equipment
Main category
Personal protection
Sub category
Respiratory protection
Sub sub category
3M respirators and cartridges
Name of the product
Cartridge
Product code
RD8002
Product use
Gas and vapour cartridge
Approved/Certified
NIOSH approved; sulfur dioxide, hydrogen chloride, chlorine, chlorine dioxide, hydrogen fluoride, hydrogen sulfide
Manufacturer
3M (TM)
Country of origin
Canada
Feature that facilitates use
Clicks onto Secure Click HF-800 and FF-800 facepieces (audible click)
Type of connection
Secure Click connection
Protection against gases and vapors
Protects against: sulfur dioxide, hydrogen chloride, chlorine, chlorine dioxide, hydrogen fluoride, hydrogen sulfide
Cartridge color code
White
Length (in/cm)
4.5 in / 11.43 cm
Width (in/cm)
2.9 in / 7.4 cm
Height (in/cm)
4.7 in / 11.94 cm
Weight (lb/kg)
0.465 lb / 0.211 kg (packed: pair (2 cartridges))
Sold by
Pair (2 cartridges)
HS Code
9020000000
Return conditions
No returnable if used. For more information about our return policy, please refer to the "Orders and Returns" link on the home page

Download

directives_cartouches_D8000

User instructions - Secure Click D8000 cartridges (3M)

Download (305.1KB)

guide_selection_respirateurs_FR

3M respirator selection guide (French)

Download (3.7MB)

guide_selection_respirateurs_EN

3M respirator selection guide (English)

Download (824.97KB)

bulletin_FF-800_Secure_Click

3M technical bulletin - Secure Click FF-800 full facepieces

Download (340.06KB)

You might also like

Comments (0)
No customer reviews for the moment.