Selections

• New product (55)

Manufacturer

• 3M (TM) (2)
• 3M DBI-SALA (39)
• Dentec Safety Specialists (1)
• DueNorth® (1)
• Hiigard (2)
• Peakworks (13)
• Protecta (13)
• SL Tech (1)

Worker’s weight

• 310 lb (141 kg) ANSI / 420 lb (190 kg) OSHA ; 2,500 lb (1,133 kg) as a horizontal lifeline end anchor maximum, including tools and equipment (2)
• 310 lb (141 kg) ANSI / 420 lb (190 kg) OSHA maximum, including tools and equipment (7)
• 310 lb (141 kg) per person, up to 3 persons maximum, including tools and equipment (1)
• 310 lb / 140 Kg maximum, with tools and equipment (48)
• 400 lb / 181 kg maximum (1)
• 420 lb / 190.5 kg maximum, with tools and equipment (3)

Name of the product

• Anchor connector (3)
• Anchor plate (3)
• Anchor point (8)
• Anchor strap (1)
• Beam anchor (5)
• Cable adapter (2)
• Concrete anchor (5)
• Concrete anchor bolt for FPA1540 (1)
• Extension for fall protection (1)
• Fixed anchor connection (1)
• Mooring strap (2)
• Parapet anchor (1)
• Permanent swivel anchor (1)
• Polyester sling (1)
• Remote anchor (1)
• Removable anchoring device (1)
• Roof anchor (21)
• Self-locking semi-automatic carabiner (5)
• Sling (3)
• Stainless steel pulley (1)
• Tie-off adapter (1)
• Tie-off adapter (1)
• Trolley anchor (1)
• Web anchor (1)
• Web tie-off anchorage adapter (1)

Features

• 1" (25.4 mm) opening (1)
• 1- ¾” / 45 mm opening (1)
• 2" (56 mm) opening (1)
• 5/8 in / 11 mm opening (1)
• A enfiler autour d'une structure, avec anneau et connecteur en O (2)
• Choke tie-off around a structure, heat-resistant Kevlar web with ring and connector (1)
• Concrete anchor bolt for FPA1540, 4" / 10.16 cm long (1)
• Depending on the use of the anchor connector is installed on the concrete rods before pouring. They are then used to anchor workers near the edge of the building. When all work involving a fall hazard is completed, they are cut (1)
• Disposable (single use) anchor for industrial and general construction roofs, nails or screws (single use) attachment (1)
• Equipped with a metal mooring with a D shape that reduces the possibility of stalling (1)
• Equipped with a small ring to connect the harness to an anchor point (1)
• For door and window widths from 21 ½" to 51 ½ / 54.6 cm to 130.8 cm (1)
• new (1)
• Permanent (single-use, designed to stay in place) anchor for anchoring to reinforcing bar (rebar) in concrete, the loop slipping directly over the bar, pass-through / choke sling (loop over the reinforcing bar) attachment (1)
• Permanent anchor connector with two lateral D-rings, ideal for sloping roofs (1)
• Permanent anchor for bitumen-based membrane roofs, wing bolt attachment (1)
• Permanent anchor for concrete or steel surfaces (pre-drilled 14.3 mm / 0.56 in holes), vertically or horizontally, concrete bolts (four 13 mm x 95 mm bolts included) attachment (1)
• Permanent anchor for concrete surfaces, concrete anchor bolt attachment (2)
• Permanent anchor for industrial and general construction roofs, lag screws (reusable hinge) attachment (1)
• Permanent anchor for industrial and general construction roofs, swivel anchor point (up to 3 users) attachment (1)
• Permanent anchor for industrial and general construction roofs, three lag screws attachment (1)
• Permanent anchor for metal, concrete and wood roofs, rivet, fab-lok or teks screws attachment (1)
• Permanent anchor for PVC membrane roofs, wing bolt attachment (1)
• Permanent anchor for roof ridges (permanent nailed installation on the structure), nail (permanent) attachment (1)
• Permanent anchor for roofs (permanent installation on the roof structure), bolt/clamp (permanent) attachment (1)
• Permanent anchor for standard and multi-ply membrane roofs, wing bolt, swivel attachment point attachment (1)
• Permanent anchor for standing seam roofs, clamp (no roof penetration) attachment (1)
• Permanent anchor for steel floors and structures (confined space, electrical transformer), permanent welding (standard welding processes) attachment (1)
• Permanent anchor for steel floors and structures (confined spaces, electrical transformer applications, industry), attached by welding onto steel floors or structures (2)
• Permanent anchor for steel floors and structures (industry, construction, electrical transformer applications), attached by welding onto steel floors or structures (2)
• Permanent anchor for steel or concrete structures, bolt-on or weld-on installation, available in zinc-plated or stainless steel (1)
• Permanent anchor for steel plates and structures, bolted to a steel plate attachment (1)
• Permanent anchor for steel structures, floors and frames (construction, general industry, mining, oil and gas), attached by bolting or welding onto a host structure (1)
• Permanent anchor for steel structures, floors and frames (construction, general industry, mining, oil and gas), bolts or welds to a host structure attachment (1)
• Permanent anchor for wood roof framing members (2x6 to 2x12 lumber), bolt / clamp fastened to the wood framing member attachment (1)
• Portable anchor for counterweight fall protection systems (industry, construction; not suitable for horizontal lifelines), attached by placing onto the base of a compatible counterweight fall protection system (1)
• Portable and reusable anchor for concrete parapets from 2.5 cm to 36.8 cm wide (1 in to 14.5 in), attached by clamping onto the parapet with pressure screws (non-penetrating, no site damage) (1)
• Portable and reusable anchor for concrete slabs, steel decking and steel grating (holes of 1.5 to 1.75 in in a substrate at least 4 in thick), top plate resting on the substrate, drop-through cable with swivel d-ring attachment (1)
• Portable and reusable anchor for ground-level installation of an anchor and lifeline at the top of a steel structure, attachment adapter set on the steel structure using the pole attachment (1)
• Portable and reusable anchor for horizontal I-beams (flanges from 2.5 to 36 in depending on the model), adjustable-hook clamp tightened onto the beam flange attachment (1)
• Portable and reusable anchor for tying off around beams, columns and structural members, pass-through / choke (choker sling) attachment (1)
• Portable and reusable anchor for tying off around beams, columns and structural members, pass-through / choke (o-ring + spring snap hook) attachment (1)
• Portable and reusable anchor for tying off around scaffold tubes and frames, pass-through / choke (choker sling) attachment (1)
• Portable and reusable anchor for tying off around structures (beams, columns, structural members), pass-through / choke (sling) attachment (2)
• Removable anchor connector to be installed on a concrete surface (2)
• Removable anchor for crane rail runways and railway lines (rail width 2.75 to 3.25 in.), clamps and slides on the rail (horizontal movement, does not pass splice plates) attachment (1)
• Removable and reusable anchor for concrete and masonry, detent bolt in a drilled hole attachment (1)
• Removable and reusable anchor for steel I-beams and profiles, adjustable clamp 5 to 13 in (127 to 330 mm) attachment (1)
• Reusable anchor connector for sloped roof (1)
• Reusable anchor for flat or sloped standing-seam metal roofs, clamp jaws onto the standing seam (no drilling) attachment (2)
• Reusable anchor for sloped or flat, wood or steel roofs, lag screws (integrated 360-degree swivel bracket) attachment (1)
• Reusable anchor for steel I-beams of various sizes, sliding clamp on the beam flange (ratchet knobs) attachment (1)
• Reusable anchor for variable-width steel I-beams, sliding clamp on the beam flange (adjustment knobs) attachment (1)
• Reusable anchor for wood, steel (Z-purlin) and metal-decking roofs, lag screws (integrated 360-degree swivel bracket) attachment (1)
• Reusable and portable anchor for I-beams (flange from 2.5 to 12 in / 6.3 to 30.5 cm), adjustable beam clamp attachment (1)
• Reusable and repositionable anchor for flat or sloped roofs up to 5 degrees (wood, concrete, bitumen), freestanding counterweight attachment (1)
• Reusable and repositionable anchor for flat roofs (membrane, gravel, metal) without drilling or fastening, freestanding counterweight attachment (1)
• Temporary anchor connector for sloped roof (1)
• Temporary or permanent (reusable) anchor for concrete (18 mm / 11/16 in or 19.05 mm / 3/4 in hole), vertically in a wall or horizontally in a ceiling, concrete screw attachment (2)
• The innovative swivel design of this zinc-plated steel anchor allows for a 360° rotation of the D-ring to prevent the lanyard from rolling up (1)
• This strap has a small ring to connect the connecting link to an anchor point. The other end consists of a choke loop (1)
• With two stamped end caps for fall protection (1)
• ¾" / 19 mm opening (1)