Bradley combination emergency shower and eye/face wash with steel bowl and pedal, certified ANSI Z358.1-2009.

Bradley combination emergency shower and eye/face wash station with steel bowl and pedal (S19314AC). The eye/face wash station can be activated by hand or by foot.

Certified ANSI Z358.1-2009. The emergency shower has a minimum flow exceeding 20 GPM (76 L/min). The eyewash has a minimum flow exceeding 3.0 GPM (11.4 L/min). This emergency shower combo does not include a device for controlling water temperature.

Ideal for laboratories, medical facilities, industries, workshops, garages, airports, food processing plants, paper mills, and any other places where workers risk being exposed to dust, particulates, and/or hazardous, irritating or corrosive materials.

This emergency shower and eye/face wash combo is floor-mounted. The emergency shower has a single-step activation simply by pulling on the triangular handle. Once activated, the emergency shower will stay on until manually turned off. The eye/face wash station is just as easy to activate by either pushing on the large handle or by stepping on the pedal if hands may not be used. Like the emergency shower, the eye/face wash station stays on until manually turned off, allowing the victim to use their hands to keep their eyes open for rinsing them.

The emergency shower has separate pipes for water intake and for the drain, and there is no risk of water accumulating in the drain pipe. The emergency shower has a yellow ABS plastic showerhead that imparts a spiralling motion to the water jet, allowing an even flow of water over a larger area. The bowl of the eye/face wash station is made of stainless steel, robust and resistant. The sprayheads of the eye/face wash station have a unique, elongated design with multiple water jets that cover more area than traditional face wash sprayheads and facilitate face rinsing. These sprayheads are equipped with strainers to filter water particulates, and with an antimicrobial protection. Yellow and gray plastic covers protect the sprayheads from dust. Pipes are made of galvanized steel protected by yellow Bradtec covering.

The package includes:

• Parts necessary for the installation of the emergency shower and eyewash station and the connection to a water supply (some parts are not supplied, see instructions)
• 1 universal safety sign to indicate the location of the emergency shower
• 1 inspection tag
• 1 trilingual instructons booklet (English, French, Spanish). PDF version also available, see below.

The manufacturer recommends the installation of a thermostatic valve in order to comply with ANSI Z358.1-2009 standards. A thermostatic valve keeps rinsing water at a lukewarm temperature. Rinsing water should not be too cold (for more comfort while rinsing for the minimum required rinsing time of 15 minutes) nor too hot (to avoid aggravating eye or face injuries and to avoid scalding).

We would also like to remind our customers that the emergency shower must not be used to rinse eyes, since the water flow is too strong and may aggravate eye injuries.