Second stage filter for the PREDATOR 750 air scrubber

Effective intermediate filtration with the Predator 750 secondary filter

Secondary filter for the PREDATOR® 750 portable air scrubber (SAH1) or any other model of air scrubber which requires a 16 in X 16 in X 2 in filters. Sold by the pack of 12 Filters.

Manufacturer’s code: H502-A

This secondary filter forms the second stage in the filtration system of Predator 750 air purifiers. It traps medium-sized particles like hairspray, dusting products, and fabric protectors in aerosol form, while allowing finer particles to pass through to the HEPA filter. Its cotton and polyester fiber composition delivers reliable, durable filtration, making it ideal for decontamination sites and industrial settings.

Performance, safety, and optimal filtration for contaminated air.

Technical features of the secondary filter for air purifiers:

The Predator 750 filter has a MERV 6 rating according to ASHRAE standards, ensuring 90% efficiency in capturing particles between 3 and 10 microns. It is UL900, Class 2 certified for low smoke emission and fire resistance. This disposable filter is sold in packs of 12 units and is compatible with CAP1200 and CAP1200-UVP models from Abatement Technologies, as well as any other purifier requiring filters of size 16 x 16 x 2 inches.

Quick and easy installation of the Predator 750 secondary filter:

To install the Predator 750 secondary filter, simply remove the used filter and insert the new one into the designated space in the air purifier, following the airflow direction. Proper installation ensures optimal filtration performance and better protection of the HEPA filter.

Maintenance and replacement of the secondary filter for continued efficiency:

Being disposable, this filter requires no specific maintenance. It is recommended to replace it every 72 hours to 3 months depending on contaminant concentration or the replacement signal issued by the air purifier. Regular replacement helps maintain optimal air quality and preserves HEPA filter performance.

Usage tips to maximize secondary filter performance:

Use the Predator 750 secondary filter in environments with high concentrations of medium-sized particles. Ensure your air purifier is properly maintained and replace the filter as recommended. Never reuse a used or damaged filter. This filter is especially suitable for decontamination work, renovations, or industrial areas.

Sylprotec reminder on filter management during asbestos removal work:

HEPA filter management:

• The HEPA filter is a critical component of the filtration system.
• It is recommended to install a new HEPA filter before starting the project in order to perform a dop test (dispersed oil particulate) and validate its efficiency.
• If the primary and secondary filters are properly maintained, the HEPA filter can be used for a longer period, but this depends on the saturation level.

Machines indicate the need for replacement:

• By an audible signal
• Or via a differential pressure gauge, whose needle indicates a loss of pressure each time the HEPA filter is replaced, a new dop test is mandatory to ensure the filter is functioning properly and that the suction remains compliant with standards.

When replacing a HEPA filter, it is imperative to turn off the machine.

This filter plays an essential role in maintaining negative pressure, which prevents the spread of contaminants into the environment. In an active workspace, such as a construction site or clean room, it is crucial not to interrupt this pressure. The machine must, therefore, be temporarily removed and replaced by another one already equipped with an operational filter to ensure continuity of containment.

Primary and secondary filter management:

• The primary filter must be changed twice a day during demolition periods as it quickly becomes clogged.
• The secondary filter is replaced once a day during demolition periods.
• Machines remain in operation during filter changes to avoid any interruption of negative pressure in the confined area.

FAQ about the Predator 750 secondary filter for air purifiers:

What types of particles can this secondary filter capture?

The Predator 750 filter effectively captures particles from 3 to 10 microns, such as spores, hairspray, dusting products, and concrete dust.

How often should this filter be replaced?

It is recommended to replace the filter every 72 hours to 3 months, depending on contaminant concentration or the indications of the air purifier.

Can this product be returned after opening?

 No, returns are not accepted if the product packaging has been opened, in accordance with our hygiene and safety policy.

Suggested complementary products for the Predator 750 secondary filter for air purifiers:

Need additional safety equipment? See the articles; Safety Liberty hard hat (TA14LR), Omega II minor hard hat type 1 (TA14FS), motorized respirator with 1000 protection factors (R6800PF), 3M  mask protection film (R6885).

Under "Accessories" at the bottom of the page. If you're looking for work equipment, have a look at the following products: White antistatic coveralls with (V51), containment fabric (SACTT2) or (SAH1) air cleaners.

The texts coloured in green correspond to hyperlinks leading to specific safety equipment or to a general information link.