Industrial canister vacuum cleaner suitable for cleaning large surfaces. This vacuum has a HEPA filter and a 8 gal (US) (30.2 L) reservoir to hold the bags which can contain asbestos, hazardous dust, non-inflammable liquids and dry or moist rubbish.
Abatement Technologies manufacturer’s code: V8000WD
This vacuum is equipped with a HEPA filter (High-Efficiency Particulate Air filter) it captures at least 99.97% of the particles at least 0,3 µm in diameter in the air. This type of filter is even more efficient when capturing particles bigger than 0,3 µm. The HEPA filter must be set up behind the air inlet to protect the components inside the vacuum from hazardous dust.
This vacuum cleaner is suitable for cleaning dry materials such as regular dust, soil, rubbish, ashes and sawdust. The HEPA filter on this vacuum is efficient against carcinogenic dust and dust carrying pathogenic agents. This device is ideal for asbestos abatement and any decontamination work. It is also suitable for general construction work and renovation as well as daily cleaning of large surfaces such as schools and health care facilities.
This canister vacuum has been design to be lightweight, compact and easy to move. The reservoir is made of blue polyethylene which is light, shock-resistant and easy to clean thermoplastic. This vacuum cleaner is equipped with a 22 ft (6.7 m) long power cord, which allows one to cover a rather large surface without having to relocate often the device.
This machine weighs a total of 32 lb (14,5 kg) and it features two fixed wheels and two swivel casters to ease its moving on all type of floors.
Included with the vacuum:
When activated, the engine of this vacuum generates 59 dBA. Its minimal power supply requirement is 120V/60 Hz and it uses 13 A on a 15 Amps circuit. The engine’s 1,6 HP to 7.25 HP generates an airflow of 135 cfm and a water lift of 92 inWC or 23 kPa which gives you a power output of 1200 Watts to 5400 Watts.
Width, 18 in x Depth, 15 in x Height, 23 in
(Width, 46 cm x Depth, 38 cm x Height, 59 cm)
Spare HEPA filters (item SAD6-F) and 4 gal (US) bags (item SAD6-S) are available under the accessories section at the bottom of the page. Please note that the bags come in a pack of 10 units and the HEPA filters are sold individually.
The DOP test (Dispersed Oil Particulate) has been designed to ensure the integrity and efficiency of HEPA filters in terms of airborne particles containment based on their holding capacity of dispersed oil particulate of 0,3 µm. This type of test is a requirement because it pinpoints any leaks on the HEPA filter, that is, through its accordion-shaped material, its frame or its seals. Note that if particles go around the HEPA filter, the DOP test has failed.
It is strongly recommended to always make a DOP test on the work site.
Please note that on asbestos abatement or mold decontamination sites, a DOP test is required:
HEPA filters are certified accordingly to current applicable regulations and a certification label shall be placed on the frame of the filter.
Please contact our customer service for more information.
|Type of product||Safety equipment|
|Main category||Industrial accessoiries|
|Sub category||Asbestos decontamination|
|Name of the product||Industrial vacuum cleaner for asbestos removal|
|Approved/Certified||ETL Tested & Certified for Safe Electrical Operation|
|Features||99.97% HEPA Filter|
|Comfort features||Low Noise Level|
|Operating flow rate||135 CFM|
|Power supply requirements||120V/13A/60Hz|
|Height (in/cm)||15 in / 38.1 cm|
|Length (in/cm)||23 in / 58.42 cm|
|Width (in/cm)||18 in / 45.72 cm|
|Weight (lb/kg)||32 lbs / 14.5 Kg|
|Return conditions||No returnable if used. For more information about our return policy, please refer to the "Orders and Returns" link on the home page.|
No customer reviews for the moment.