Inlet manifold 24 in X 24 in with an inlet of 12 in diameter for SAH2 and SAH2MA HEPA-AIRE® air scrubbers. Exhaust duct not included. Sold individually.
An inlet manifold allows the purification of the air in a room or a work zone which is difficult to reach with an air scrubber. The inlet manifold goes at the front of the negative pressure vacuum and makes possible to carry ducting of a given length to the room or work zone which is hard to reach. This ducting will take on the role of the airflow inlet and bring the contaminated air to the negative pressure machine to be filtered.
This thermoplastic piece is compatible with both HEPA-AIRE® (SAH2 and SAH2MA) air scrubbers by Abatement Technologies. They indeed have a filtration system which consists in a chain of filters measuring 24 in X 24 in. These are the same measurement as one of the inlet manifold’s side so to fit perfectly and remain airtight. The other extremity is equipped with a 12 in diameter aperture to enable the installation of an exhaust duct which will reach the difficult to access room or zone. Please note that the exhaust duct (SAHCF12) is sold separately.
|Type of product
|Name of the product
|12 in / 30.48 cm
|24 in / 60.9 cm
|24 in / 61 cm
|15 lb / 6.80 Kg
|No returnable if used. For more information about our return policy, please refer to the "Orders and Returns" link on the home page