Disposable glove bags for vertical pipes, diam. 10 inches or less, 20 bags/roll.

Asbestos glove bags for vertical pipes – essential equipment for safe handling

Disposable glove bags for vertical pipes of diameter 10 inches (25.4 cm) or less. Roll of 20 bags

These glove bags are engineered specifically for vertical pipe asbestos removal. Made from durable 6-mil polyethylene, they provide a strong barrier against hazardous fibers. Integrated gloves allow workers to safely manipulate insulation without direct contact, minimizing exposure risks. The bags are non-reusable and must remain fixed once installed, ensuring a sealed environment throughout the operation.

Safe and efficient asbestos removal solution.

Key features of the vertical pipe glove bags:

Each glove bag is designed to fit vertical pipes with a diameter of 10 inches or less. The 6-mil polyethylene construction offers high resistance to tears and punctures. The built-in arm sleeves allow for safe handling of asbestos materials inside the containment area. These bags are sold in rolls of 20 units, making them practical for ongoing abatement work. Their zipper-free design ensures they cannot be repositioned once installed, enhancing containment integrity.

Installation instructions for asbestos glove bags on vertical pipes:

To install the glove bag, wrap it securely around the section of pipe to be treated. Use polyethylene tape to seal the edges and ensure a tight fit. Cut a small hole to insert the nozzle of a wetting agent sprayer, then reseal the opening immediately to prevent fiber release. Once the bag is in place, workers can use the integrated gloves to safely remove asbestos insulation within the sealed environment.

Maintenance and disposal of used glove bags:

After use, glove bags must be handled with care to avoid releasing asbestos fibers. Seal all openings with tape and place the used bag into a designated asbestos waste bag or wrap it in approved polyethylene sheeting. Follow local regulations for hazardous waste disposal to ensure compliance and safety. These glove bags are single-use only and should never be reused.

Usage tips for effective asbestos decontamination with glove bags:

Always saturate asbestos insulation with a wetting agent before removal to reduce airborne particles. Once installed, do not attempt to move or reposition the glove bag. Wear appropriate personal protective equipment and follow all safety protocols during the operation. These glove bags are ideal for vertical pipe applications and should be used in accordance with industry standards.

FAQ glove bags for vertical pipe asbestos removal:

What material are the glove bags made from?

They are constructed from 6-mil polyethylene, offering durability and resistance to punctures.

Can the glove bags be reused?

 No, these glove bags are designed for single-use only and must remain fixed once installed.

How should used glove bags be disposed of?

Seal the bag completely and place it in an approved asbestos waste container or wrap it in polyethylene sheeting, following local disposal regulations.

Additional suggestions for the decontamination glove bag:

Need additional safety equipment? See the articles; Safety hard hat (TA14LR), Omega II minor hard hat type 1 (TA14FS), motorized respirator with 1000 protection factors (R6800PF), 3M  mask protection film (R6885).

Under "Accessories" at the bottom of the page. If you're looking for work equipment, have a look at the following products: White antistatic coveralls with (V51), containment fabric (SACTT2) or (SAH2MA) air cleaners.

The texts coloured in green correspond to hyperlinks leading to specific safety equipment or to a general information link.