Cut-resistant A5 SureKnit® Dyneema®, Spandex & stainless steel knit touchscreen friendly glove. CFIA approved. Sold in pairs.


Please select the available option below :

Return conditions : No returnable if used. For more information about our return policy, please refer to the "Orders and Returns" link on the home page

Cut-resistant SureKnit® Dyneema®, Spandex and stainless steel conductive for touchscreen friendly blended-knit glove Sold in pairs.

Superior manufacturer’s code: S13DGSTL

These gloves are available in sizes ranging from extra-small (6) to double extra-large (11). Please select the size needed in the field located above.

This glove is also approved for food handling by the Canadian Food Inspection Agency (CFIA).

This glove has an abrasion resistance level 3 and a cut resistance level A5 according to ASTM and ANSI standards.

GS13DGSTL peculiarities:
SureKnit™ series gloves are made of a high-tenacity Dyneema® composite fiber which is on an equal-weight basis, more resistant than steel, thus it doesn’t lint. This comfortable and lightweight glove does not hamper dexterity and protects outstandingly from cuts and abrasion. The foam nitrile coating provides an excellent grip both on wet and slippery surfaces and even allows one to handle his or her touchscreen devices. This glove has moreover undergone the AlphaSan® treatment – a silver-based antimicrobial agent that prevents and impedes bacterial growth, which makes this glove ideal for the food industry.

Dyneema properties:
Dyneema, that is ultra-high-molecular-weight polyethylene (UHMWP), is at equal weighting 15 times more resistant to abrasion than steel, and twice as resistant as Kevlar. Dyneema is by far the best material for protection from abrasion and impact of all the thermoplastic compounds. It offers an excellent chemical resistance, and resist well to moisture and unlike Kevlar, resist to UV light. Of course, Dyneema also offers an outstanding protection against mechanical risks such as wearing, abrasion and elongation.

Use for:
This glove is recommended for workers dealing with meat processing, food and beverage as well as handling sharp materials or manufacturing solar panel.

Do not use for:
Dyneema has little to no resistance to heat. This glove offers no sure protection against cuts, wear, tear and puncture so mechanical risks should not be overlooked. This glove is of course not coated, thus it is strongly recommended to not immerse it in liquids.

Maintenance and service life:
It is recommended to carry out a basic maintenance to extend the service life of your gloves. Simply wash them with cold water, that is, 85°F/30°C, and a mild detergent. It is also recommended to rinse your glove with cold water after wash. You can then dry them at low temperature in a dryer. Never use bleach on this glove.

Type of productSafety equipment
Main categoryPersonal protection
Sub categoryGloves
Sub sub categoryCut-resistant gloves
Name of the productAnti-cutting glove
Series of productsSureKnit™
Product codeGS13GDSTL
Approved/CertifiedANSI A5 cut, ANSI 3 abrasion
Approved for food useCFIA ( Canadian food inspection agency)
Fineness of the knitting13 Gauge
Choice of formatSize extra small (6) to double extra-large (11) available
Characteristic adding safetyProvides 360° cut resistance
Material2Dyneema™ knit
Material3Steel wire
WashableWash in cold water at 85°F/30°C with mild detergent. It is recommended to rinse gloves in cold water before drying. Spread to dry. Never use bleach on this glove
Length (in/cm)6 in / 15.24 cm
Width (in/cm)6 in / 15.24 cm
Height (in/cm)0.5 in / 1.27 cm
Weight (lb/kg)0.15 lb / 0.068 Kg
Sold byPair
Return conditionsNo returnable if used. For more information about our return policy, please refer to the "Orders and Returns" link on the home page

Gabarit glove sizes Fr

Fichier en Français gabarit grandeur de gant

Download (117.67k)


28 other products in the same category: