Peakworks compliance polyester safety harness, class A, one D-ring and pass-thru buckles , one size fit all
FPH1000A
$67.15
Peakworks class A safety harness, economical model in hi-vis green polyester. Pass-Thru buckles, 3 adjustment points, steel dorsal D-ring and sub-pelvic strap. Universal size (medium to extra-large). High capacity: supports up to 400 lb (181.4 kg).
Return conditions:
No returnable if used. For more information about our return policy, please refer to the Orders and Returns.
Peakworks class A harness in hi-vis green polyester, universal size
The Peakworks safety harness is an economical class A fall-arrest harness built for occasional construction and maintenance work. Fitted with a steel dorsal D-ring for fall arrest, it provides 3 adjustment points (2 on the legs and 1 on the chest) along with a sub-pelvic support strap for a safe, comfortable fit. Available in a universal size, it suits workers from medium to extra-large. Its economical nature is reflected in its unpainted metal components, compared with the Contractor or Peakpro models from the same brand.
Its webbing is made of hi-vis green polyester (with black and grey elements), a material that offers better resistance to acidic chemicals than nylon and improves the worker's visibility on site. The chest and thigh straps are joined by Pass-Thru buckles, and plastic tips at the end of each strap prevent fraying while making adjustment easy, even with work gloves on.
This harness stands out for its high capacity: it supports a worker up to 400 lb (181.4 kg), including clothing, tools and equipment — more than standard harnesses limited to 310 lb. Two rigid retaining loops hold the lanyard when not in use and limit tripping hazards, and a drop indicator makes visual inspection before each use easier. Peakworks product code: V8001000 (model FBH-10002A). Complies with CSA Z259.10-06 and ANSI Z359.11.
Benefits of the Peakworks fall-arrest harness
This basic harness focuses on excellent value, high visibility and higher load capacity, making it a solid choice to equip a crew or for occasional work at height.
High visibility and high capacity
The hi-vis green polyester makes the worker more visible on site, and the 400 lb (181.4 kg) capacity covers a wider range of workers and tool loads than harnesses limited to 310 lb.
Worksites and sectors where this product is required
This class A harness meets fall-arrest needs across many environments involving work at height:
- Construction and renovation (framing, roofing, formwork, scaffolding)
- Building maintenance and occasional work at height
- Industry and plants (walkways, mezzanines, platforms)
- Telecommunications and work on structures or towers
- Municipal, roadwork and public services
A complete fall-arrest system around the harness
A harness never protects on its own: it is the core of a complete fall-arrest system that must also include a reliable anchor point and a connecting means suited to the work at height. Depending on your site, you will pair the Peakworks harness with an energy-absorbing lanyard or connecting device, a compliant anchorage connector and the rescue equipment needed to act quickly after a fall.
Safety harness maintenance and inspection
The worker is responsible for a routine inspection before each use, looking for any sign of degradation, wear, malfunction or breakage. The harness must be replaced at the first sign of failure.
In addition, this harness should be inspected by a qualified person other than the worker who wears it. The required frequency varies by manufacturer: every 90 days, every 180 days or yearly. The harder the work and environmental conditions, the more often it should be inspected. The recommended service life of a harness is 5 years. Sylprotec offers a harness inspection service, available under the Service tab at the top of the page. Any equipment subjected to a fall or impact must be taken out of service.
For cleaning, use a gentle soap and clean lukewarm water (37 °C). Do not use bleach or other abrasive or chemical products. Air dry without excessive heat, in a clean environment, and avoid exposing the harness to sunlight or any source of contamination.
Frequently asked questions about the Peakworks harness
What is the maximum load of this harness?
It supports a worker up to 400 lb (181.4 kg), including clothing, tools and equipment — a higher capacity than standard harnesses limited to 310 lb.
What colour is this harness?
The webbing is hi-vis green polyester (with black and grey elements), improving the worker's visibility on site.
How long does a safety harness last?
The recommended service life is 5 years. Any harness that has been through a fall or impact must be taken out of service immediately, regardless of its age.
Fall-arrest equipment suggestions for the harness
See also a lanyard with energy absorber (FPL5400), a temporary concrete anchor (FPAF075N), a galvanized steel sling (FPAE), a rescue device (FPLR550), a Peakworks storage bag (FPBAG), a wrist tools strap (FPLA9900), the mandatory inspection sign (ECO130) and safety eyewear (YA12E93101DX). Under "Accessories" at the bottom of the page.
FPH1000A
Data sheet
- Product group
- Safety equipment
- Main category
- Personal protection
- Sub category
- Fall protection
- Sub sub category
- Fall protection safety harness
- Name of the product
- Safety harness
- Series of products
- Peakworks
- Product code
- FPH1000A
- Product use
- Designed for construction work
- Approved/Certified
- Complies with CSA Z259.10-06 and ANSI Z359.11
- Manufacturer
- Peakworks
- Country of origin
- China
- Choice of format
- Universal sizes (medium to extra-large)
- Reusable
- Reusable with careful inspection and proper installation
- Features
- The chest and leg straps are joined by interlocking buckles
- Additional Features
- This harness has 3 adjustment points; 2 on the legs and 1 on the chest
- Comfort features
- Equipped with a sub-pelvic strap providing greater comfort during suspension
- Characteristics of metal parts
- Non-painted metal parts
- Post-suspension relief strap
- Does not include trauma straps
- Includes
- With a steel back ring
- Property of the material
- Polyester straps offer better resistance to acidic chemicals
- Classification
- Class A — dorsal D-ring (A) for fall arrest
- Function of attachment points
- Dorsal D-ring: fall arrest
- Material1
- Polyester
- Material2
- Steel
- Washable
- Wash in warm water, 98.60°F/ 37°C. Never use bleach or other abrasive or chemical products on your lanyard. Air dry
- Length (in/cm)
- 13 in / 33.02 cm
- Width (in/cm)
- 8 in / 20.3 cm
- Height (in/cm)
- 2 in / 5.08 cm
- Weight (lb/kg)
- 2 lb / 0.9 Kg
- Sold by
- Unit
- Color
- High Visibility Green/Black/Gray
- Another packaging available
- 5 units per box
- Return conditions
- No returnable if used. For more information about our return policy, please refer to the "Orders and Returns" link on the home page
- Caution
- The maximum weight of the worker that can wear this harness is 400 lb / 181.4 kg, including clothing, tools, etc
New
You might also like
Comments (0)
No customer reviews for the moment.
8 other products in the same category:
Customers who bought this product also bought:
Peakworks class A safety harness, economical model in hi-vis green polyester. Pass-Thru buckles, 3 adjustment points, steel dorsal D-ring and sub-pelvic strap. Universal size (medium to extra-large). High capacity: supports up to 400 lb (181.4 kg).