Peakworks harness for controlled descent, confined space, class A, E
FPH2000AE
$135.95
Peakworks contractor harness Class A and E with 3 D-rings (1 dorsal, 2 shoulder) for fall arrest and confined space rescue. Universal size, polyester webbing, 400 lb (180 kg). Meets ANSI Z359.11-2014 and CSA Z259.10-12.
Return conditions:
No returnable if used. For more information about our return policy, please refer to the Orders and Returns.
Peakworks Contractor Safety Harness, Class A and E for Controlled Descent and Confined Space
The Peakworks contractor safety harness is a versatile Class A and E fall protection harness designed for fall arrest and confined space rescue. It features 3 D-rings: 1 dorsal D-ring for fall arrest (Class A) and 2 shoulder D-rings for retrieval and controlled descent in confined spaces (Class E). Universal size, it fits most workers and suits construction, maintenance, controlled descent and confined space work. The maximum worker weight, including clothing and tools, is 400 lb (180 kg).
Peakworks product code: V8002230 (model FBH-10020E). This harness meets the ANSI Z359.11-2014 and CSA Z259.10-12 standards.
This harness is made of woven non-stretch polyester webbing. Polyester was chosen for its superior resistance to acids and chemicals, an important advantage in industrial environments and maintenance work where the harness may be exposed to contaminants. The chest and leg straps close with interlocking buckles, and the distinctly coloured straps make donning easier. The identification and certification labels are sewn onto the strap on the back left side.
Benefits of the Peakworks Contractor Harness
Built for demanding environments, this harness combines comfort, versatility and compliance to deliver reliable fall protection paired with a built-in rescue capability.
Harness comfort and ease of use
Equipped with a sub-pelvic strap providing greater comfort during suspension, the harness has 5 adjustment points (2 on the legs, 2 on the shoulders, 1 on the chest) and distinctly coloured straps for fast, error-free donning.
Class A and E versatility for confined space
The dorsal D-ring handles fall arrest (Class A) while the two shoulder D-rings enable rescue and controlled descent in confined spaces (Class E), making it a two-in-one harness for teams that combine work at height with confined space access.
Job sites and sectors where this harness is required
- Confined space work: tanks, silos, access shafts, manholes
- Controlled descent and worker retrieval
- Construction, framing and work at height
- Industrial maintenance and equipment servicing
- Telecommunications, utilities and structural work
- Roofing, scaffolding and aerial lift work
Safety harness inspection
The worker is responsible for performing a routine inspection before each use. During this inspection, the worker must note any signs of degradation, wear, malfunction or breakage. The harness must be replaced at the first sign of failure.
In addition, this harness should be inspected by a qualified person other than the worker who wears it. The required frequency varies by manufacturer: some require it every 90 days, others every 180 days, or yearly. The harder the work and environmental conditions, the more often you should inspect the harness. The recommended lifetime is 5 years. Sylprotec offers a safety harness inspection service: see the Services tab under the Sylprotec logo at the top of the page. Any equipment that has withstood a fall or an impact must be scrapped.
Harness cleaning and maintenance
For cleaning, use a gentle soap and clean lukewarm water (37°C). Do not use bleach or other abrasive or chemical products. If your harness is too dirty or contaminated, it is time to replace it. Air dry without excessive heat in a clean environment. You can speed up drying with a clean absorbent cloth or a fan. Avoid exposing the harness to sunlight or any source of contamination.
Frequently Asked Questions (FAQ) about the Peakworks harness
Here are the most common questions about this Class A and E contractor harness.
What do Class A and E mean on a harness?
Class A refers to fall arrest provided by the dorsal D-ring, and Class E refers to rescue and controlled descent in confined spaces provided by the shoulder D-rings. This harness combines both classes.
What is the maximum supported weight?
The maximum worker weight is 400 lb (180 kg), including clothing, tools and any equipment carried.
What is the lifetime of the safety harness?
The recommended lifetime is 5 years, and any harness that has been subjected to a fall or impact must be taken out of service immediately.
Suggested complementary products
To complete your fall protection system and confined space access setup, also consider the confined space kit with 3-way tripod and winch (FPLRK3), its confined space yoke lanyard (FPLRKL), the davit kit (FPLRK4), the heavy-duty storage bag (FPBAG), a self-locking carabiner rated 30 kN (FPAM88), a wrist tool strap (FPLA9900), an Independence class E helmet (TA14LR) and Cee Tec safety glasses (YA12E93101DX). Under "Accessories" at the bottom of the page.
FPH2000AE
Data sheet
- Product group
- Safety equipment
- Main category
- Personal protection
- Sub category
- Fall protection
- Sub sub category
- Fall protection safety harness
- Name of the product
- Safety harness
- Series of products
- Contractor
- Product code
- FPH2000AE
- Product use
- Designed for construction work
- Approved/Certified
- Meets the standards ANSI Z359.11-2014 and CSA Z259.10-12
- Manufacturer
- Peakworks
- Country of origin
- China
- Choice of format
- Universal sizes (medium to extra-large)
- Reusable
- Reusable with careful inspection and proper installation
- Features
- The chest and leg straps are joined by interlocking buckles
- Additional Features
- This harness has 5 adjustment points: 2 on the legs, 2 on the torso and 1 on the chest
- Comfort features
- Equipped with a sub-pelvic strap providing greater comfort during suspension
- Characteristics of metal parts
- Non-painted metal parts
- Post-suspension relief strap
- Does not include trauma straps
- Feature that facilitates use
- The straps have distinct colors for easy donning
- Includes
- With 1 zinc-plated steel dorsal D-ring and shoulder D-rings (pair)
- Includes 3
- The ends of the straps have plastic tips to prevent fraying and allow the user to adjust the harness easily even when wearing work gloves
- Property of the material
- Polyester straps offer better resistance to acidic chemicals
- Classification
- Class AE — dorsal D-ring (A, fall arrest) + shoulder D-rings (E, rescue and confined space access)
- Function of attachment points
- Dorsal D-ring: fall arrest. Shoulder D-rings: rescue and confined-space access
- Type of harness
- Vest-style harness
- Material1
- Polyester
- Material2
- Steel
- Washable
- Wash in warm water, 98.60°F/ 37°C. Never use bleach or other abrasive or chemical products on your lanyard. Air dry
- Length (in/cm)
- 11 in / 27.94 cm
- Width (in/cm)
- 11 in / 27.94 cm
- Height (in/cm)
- 2 in / 5.08 cm
- Weight (lb/kg)
- 4.2 lb / 1.91 kg
- Sold by
- Unit
- Color
- High Visibility Green/Black/Gray
- Another packaging available
- 5 units per box
- Return conditions
- No returnable if used. For more information about our return policy, please refer to the "Orders and Returns" link on the home page
- Caution
- The maximum weight of the worker that can wear this harness is 400 lb / 181.4 kg, including clothing, tools, etc
New
You might also like
Comments (0)
No customer reviews for the moment.
8 other products in the same category:
Customers who bought this product also bought:
Peakworks contractor harness Class A and E with 3 D-rings (1 dorsal, 2 shoulder) for fall arrest and confined space rescue. Universal size, polyester webbing, 400 lb (180 kg). Meets ANSI Z359.11-2014 and CSA Z259.10-12.