Portable fire extinguisher with FE36, 13.25 lbs, type ABC, ULC 2A-10BC, with wall hook. Ideal for electronics.

13.25 lb FE-36 portable extinguisher, ULC 2A-10BC, clean agent

The 13.25 lb FE-36 portable fire extinguisher is rated ULC 2A-10BC and covers class A, B and C fires. Its clean agent does not damage sensitive electronics, making it a versatile, ideal choice for server rooms, computer offices and control rooms. It comes with a wall hook.

This extinguisher discharges a clean extinguishing agent, FE-36, which does not damage sensitive or expensive electronic components. It is ideal to protect server rooms, offices with computers and control rooms. In addition, its agent does not cause thermal shock compared with CO2 extinguishers. The cylinder is red steel. This extinguisher is made by Ansul.

Specifications of the 13,25 lb clean-agent extinguisher

• Agent type: FE-36 (clean halocarbon agent).

• Capacity: 13,25 lb.

• ULC rating: 2A-10BC.

• Approval: ULC.

• Discharge range: 14 to 16 ft (4.2 to 4.8 m).

• Discharge time: 13,5 secondes.

• Operating temperature: -40°C to 49°C (-40°F to 120°F).

• Weight: 25 lb (11,34 kg).

• Material: steel.

• Manufacturer: Ansul.

Fire classes and safety warnings

This FE-36 extinguisher is recommended for class A fires (wood, paper, fabric), class B fires (flammable liquids and gases) and class C fires (energized electrical equipment). Versatile, it covers the three main fire classes.

• Clean agent: FE-36 leaves no residue and does not damage sensitive or expensive electronic components.

• Electrical fires: immediately cut the circuit power before extinguishing the fire.

• Class D: do not use on combustible metals (class D).

Extinguisher maintenance and inspection

An extinguisher only protects you if it is kept in good condition. Regular maintenance ensures it will work the day you need it.

• Monthly visual inspection: check that the gauge needle is in the green zone, the pin and seal are in place, and the steel cylinder is free of damage or corrosion.

• Annual servicing: have the extinguisher inspected yearly by a certified technician (NFPA 10 / local regulations).

• Recharge: any extinguisher that has been used, even partially, must be recharged immediately by a qualified shop.

• Hydrostatic test: the cylinder must undergo periodic pressure testing per the standard.

• Location: keep the extinguisher accessible, clearly marked and protected from impact.

FAQ about the FE-36 clean-agent extinguisher

What is the FE-36 clean agent?

FE-36 is a clean halocarbon agent that evaporates without leaving residue, unlike dry chemical. It is designed to put out fire without damaging sensitive electronics.

How does it differ from a CO2 extinguisher?

Like CO2, FE-36 is a clean agent, but it does not cause thermal shock to equipment, making it safer for fragile electronics and server rooms.

Does it really cover class A?

Yes, with its 2A-10BC rating it also works on solid-material fires (class A), in addition to classes B and C, making it versatile.

Complete fire protection and signage

For complete fire protection, equip each at-risk area with an extinguisher matched to its fire class, mount it correctly and clearly mark it. Sylprotec offers the full range of portable extinguishers, brackets and cabinets to build a coherent setup.

Sylprotec also offers an inspection and maintenance service for portable extinguishers in the greater Montreal area, plus a full range of fire-protection signs to reduce reaction time.

Suggestions and accessories for your clean-agent extinguisher

See also the other FE-36 model (EXFE5), a matching wall hook (CUNI15), a CO2 extinguisher (EXCO5), an ABC dry powder extinguisher (EXABC5), a demineralized-water extinguisher (EXAC2.5), a semi-recessed cabinet (EC7), a hammer with chain for the cabinet (ECM) and an extinguisher-location sign (EI700). Under "Accessories" at the bottom of the page.

The texts coloured in green correspond to hyperlinks leading to specific safety equipment or to a general information link.