B75

Polyflex fire hose, 1.5 in X 75 feet, with brass coupling.

$130.30

Return conditions : No returnable if used. For more information about our return policy, please refer to the "Orders and Returns" link on the home page.

Fire hose, diameter 1 ½ inches (38 mm), 75 feet (22.8 m) long, pre-folded on 12 pins. NPSH/IPT-threaded brass coupling.
Compliant with NFPA 1961 standard. FM and UL approved.
Designed for a service pressure of 250 PSI (1725 kPa). Tested at a proof pressure of 500 PSI (3450 kPa).

Great for ensuring fire safety and code compliance. This fire hose must be stored in a fire cabinet, on a hose rack or in a hose reel. To calculate the required length, measure the size of the building and subtract 25 ft. This 75-ft hose covers a 100-ft radius.

This compact and lightweight fire hose is made of Polyflex, a polyester-based synthetic fiber bonded with polyurethane. The hose jacket is woven. The hose is resistant to mold, most chemicals, petroleum-based products, UV exposure and ozone.

This fire hose is designed for occasional emergency use only.
The thin single jacket snags and punctures easily on rough surfaces such as pavement, concrete, gravel, etc. Do not use this hose outdoors or for general building maintenance. Not suitable for heavy-duty uses such as washing garages, vehicles, driveways, etc.
We also offer heavy-duty double jacket hoses, for all your fire safety and building maintenance needs.

Size:
Diameter: 1 ½ inches (38 mm)
Length: 75 feet (22.8 m)
Weight without coupling: 7.7 lbs (3.5 kg)
Weight including coupling: 9.5 lbs (4.3 kg)

Type of product Safety equipment
Main category Fire protection
Sub category Fire hoses and accessories
Product code B75
Approved/Certified Compliant with NFPA 1961 standard. FM and UL approved.
Resistance Resistant to mold, most chemicals, petroleum-based products, UV exposure and ozone.
Material1 Polyflex
Material2 Brass
Height (in/cm) 3 in / 7.6 cm
Length (in/cm) 24 in / 60.9 cm
Width (in/cm) 10 in / 25.4 cm
Weight (lb/kg) 9.5 lbs / 4.3 Kg
Operating pressure 250 PSI / 1725 KPa
Test pressure 500 PSI / 3450 KPa
Burst pressure 750 PSI / 5175 KPa
Hose diameter 1.5 in / 3.8 cm
Connection diameter 1 11/16 in / 4.3 cm (NPSH/IPT)
Hose length 75 feet
Type of thread NPSH
Return conditions No returnable if used. For more information about our return policy, please refer to the "Orders and Returns" link on the home page.

Reviews

No customer reviews for the moment.

Write a review
Polyflex fire hose, 1.5 in X 75 feet, with brass coupling.

Polyflex fire hose, 1.5 in X 75 feet, with brass coupling.

Accessories

30 other products in the same category: