Polyflex fire hose, 1.5 in X 100 feet, with brass coupling.
B100
$216.25
Polyflex fire hose 1.5 in x 100 ft with NPSH brass coupling, compliant with NFPA 1961, UL and FM. Single jacket for occasional emergency use.
Return conditions:
No returnable if used. For more information about our return policy, please refer to the Orders and Returns.
Polyflex fire hose 1.5 in x 100 ft with brass coupling
Fire hose with a 1 ½ inch (38 mm) diameter, 100 feet (30.5 m) long, pre-folded on 24 pins. NPSH/IPT-threaded brass coupling. Designed for building fire protection, this hose must be stored in a fire cabinet or on a hose reel.
Standards and pressure of the Polyflex fire hose
Compliant with the NFPA 1961 standard. FM and UL approved. Designed for a service pressure of 250 PSI (1725 kPa) and tested at a proof pressure of 500 PSI (3450 kPa).
Resistant Polyflex material of the fire hose
This compact and lightweight hose is made of Polyflex, a polyester-based synthetic fiber bonded with polyurethane, with a woven jacket. It is resistant to mold, most chemicals, petroleum-based products, UV exposure and ozone.
Calculating the required hose length
To calculate the required length, measure the size of the building and subtract 25 ft. This 100-ft hose covers a 125-ft radius.
Precautions for the single-jacket fire hose
This fire hose is designed for occasional emergency use only.
The thin single jacket snags and punctures easily on rough surfaces such as pavement, concrete, gravel, etc. Do not use this hose outdoors or for general building maintenance. Not suitable for heavy-duty uses such as washing garages, vehicles, driveways, etc. We also offer heavy-duty double jacket hoses for all your fire safety and building maintenance needs.
Dimensions and weight of the 100 ft fire hose
Diameter: 1 ½ inches (38 mm)
Length: 100 feet (30.5 m)
Weight without coupling: 10.2 lbs (4.6 kg)
Weight including coupling: 12 lbs (5.4 kg).
FAQ: Polyflex fire hose 1.5 in x 100 ft
Can this fire hose be used for outdoor maintenance?
No. Its single woven jacket is designed for occasional emergency use. For heavy-duty or outdoor use, choose a double jacket hose.
Which hose length should I choose?
Measure the building and subtract 25 ft. A 100-ft hose covers a 125-ft radius; 50-ft and 75-ft versions are also available.
Which standards does this hose comply with?
It complies with the NFPA 1961 standard and meets UL and FM requirements.
Complementary suggestions for fire hoses
You need complementary safety equipment. See the items; the B50 hose (B50), the B75 model (B75), the Permatek (BM50).
Under "Accessories" at the bottom of the page. Looking for equipment to work with, see the following products: the cabinet (BC100), the unit (BC101), the reel (IBD18), the nozzle (IBPLE) or the sign (EI701).
B100
Data sheet
- Product group
- Safety equipment
- Main category
- Fire protection
- Sub category
- Fire hoses and accessories
- Product code
- B100
- Approved/Certified
- Compliant with NFPA 1961 standard. FM and UL approved
- Type of thread
- NPSH
- Hose diameter
- 1.5 in / 3.8 cm
- Connection diameter
- 1 11/16 in / 4.3 cm (NPSH/IPT)
- Hose length
- 100 feet
- Resistance
- Resistant to mold, most chemicals, petroleum-based products, UV exposure and ozone.
- Operating pressure
- 250 PSI / 1725 KPa
- Test pressure
- 500 PSI / 3450 KPa
- Burst pressure
- 750 PSI / 5175 KPa
- Material1
- Polyflex
- Material2
- Brass
- Length (in/cm)
- 26 in / 66.04 cm
- Width (in/cm)
- 13 in / 33.02 cm
- Height (in/cm)
- 3 in / 7.6 cm
- Weight (lb/kg)
- 12 lb / 5.4 Kg
- Return conditions
- No returnable if used. For more information about our return policy, please refer to the "Orders and Returns" link on the home page
New
You might also like
Comments (0)
No customer reviews for the moment.
8 other products in the same category:
Customers who bought this product also bought:
Polyflex fire hose 1.5 in x 100 ft with NPSH brass coupling, compliant with NFPA 1961, UL and FM. Single jacket for occasional emergency use.