Polyflex fire hose, 1.5 in X 50 feet, with brass coupling.

Reference : B50

$140.45

Polyflex fire hose 1.5 in x 50 ft with NPSH brass coupling, compliant with NFPA 1961, UL and FM. Single jacket for occasional emergency use.

Quantity

Compare

Estimate Shipping

Return conditions:

No returnable if used. For more information about our return policy, please refer to the Orders and Returns.

Polyflex fire hose 1.5 in x 50 ft with brass coupling

Fire hose with a 1 ½ inch (38 mm) diameter, 50 feet (15.2 m) long, pre-folded on 15 pins. NPSH/IPT-threaded brass coupling. Designed for building fire protection, this hose must be stored in a fire cabinet or on a hose reel.

Standards and pressure of the Polyflex fire hose

Compliant with the NFPA 1961 standard. FM and UL approved. Designed for a service pressure of 250 PSI (1725 kPa) and tested at a proof pressure of 500 PSI (3450 kPa).

Resistant Polyflex material of the fire hose

This compact and lightweight hose is made of Polyflex, a polyester-based synthetic fiber bonded with polyurethane, with a woven jacket. It is resistant to mold, most chemicals, petroleum-based products, UV exposure and ozone.

Calculating the required hose length

To calculate the required length, measure the size of the building and subtract 25 ft. This 50-ft hose covers a 75-ft radius.

Precautions for the single-jacket fire hose

This fire hose is designed for occasional emergency use only.
The thin single jacket snags and punctures easily on rough surfaces such as pavement, concrete, gravel, etc. Do not use this hose outdoors or for general building maintenance. Not suitable for heavy-duty uses such as washing garages, vehicles, driveways, etc. We also offer heavy-duty double jacket hoses for all your fire safety and building maintenance needs.

Dimensions and weight of the 50 ft fire hose

Diameter: 1 ½ inches (38 mm)
Length: 50 feet (15.2 m)
Weight without coupling: 5.1 lbs (2.3 kg)
Weight including coupling: 6.5 lbs (2.9 kg).

FAQ: Polyflex fire hose 1.5 in x 50 ft

Can this fire hose be used for outdoor maintenance?

No. Its single woven jacket is designed for occasional emergency use. For heavy-duty or outdoor use, choose a double jacket hose.

Which hose length should I choose?

Measure the building and subtract 25 ft. A 50-ft hose covers a 75-ft radius; 75-ft and 100-ft versions are also available.

Which standards does this hose comply with?

It complies with the NFPA 1961 standard and meets UL and FM requirements.

Complementary suggestions for fire hoses

You need complementary safety equipment. See the items; the B75 hose (B75), the B100 model (B100), the Permatek (BM50).

Under "Accessories" at the bottom of the page. Looking for equipment to work with, see the following products: the cabinet (BC100), the unit (BC101), the reel (IBD18), the nozzle (IBPLE) or the sign (EI701).

Green-coloured text corresponds to hyperlinks leading to specific safety equipment or general information.

Reference B50

Data sheet

Product group: Safety equipment
Main category: Fire protection
Sub category: Fire hoses and accessories
Product code: B50
Approved/Certified: Compliant with NFPA 1961 standard. FM and UL approved
Type of thread: NPSH
Hose diameter: 1.5 in / 3.8 cm
Connection diameter: 1 11/16 in / 4.3 cm (NPSH/IPT)
Hose length: 50 feet
Resistance: Resistant to mold, most chemicals, petroleum-based products, UV exposure and ozone.
Operating pressure: 250 PSI / 1725 KPa
Test pressure: 500 PSI / 3450 KPa
Burst pressure: 750 PSI / 5175 KPa
Material1: Polyflex
Material2: Brass
Length (in/cm): 18 in / 46 cm
Width (in/cm): 12 in / 30.48 cm
Height (in/cm): 3 in / 7.6 cm
Weight (lb/kg): 6.5 lb / 2.94 Kg
Return conditions: No returnable if used. For more information about our return policy, please refer to the "Orders and Returns" link on the home page