Forestry single-jacket fire hose, 1.5 in x 50 ft, with aluminium coupling.
BF50
$283.55
Single-jacket forestry fire hose, 1.5 in x 50 ft, aluminium coupling. Mertex and Permatek HP treated, 300 PSI service. NFPA 1961, UL, FM, USDA.
Return conditions:
No returnable if used. For more information about our return policy, please refer to the Orders and Returns.
Single-jacket forestry fire hose 1.5 in x 50 ft with aluminium coupling
Single-jacket forestry fire hose, 1.5 inch diameter x 50 ft long, with a standard aluminium coupling. Lightweight and high-performing, it is designed for fighting forest and brush fires as well as for industrial fire protection.
High pressure ratings of the forestry hose
Service pressure: 300 PSI. Proof pressure: 600 PSI. Burst pressure: 900 PSI. Compliant with NFPA 1961, Underwriter's Laboratory (UL), Factory Mutual (FM) and U.S.D.A. spec 5100-187B type II standards.
Mertex and Permatek HP jacket treatments
The inside of the jacket has undergone the Mertex process, making it very smooth to minimize friction pressure loss. The outside has been treated with Permatek HP to increase its abrasion resistance and make it more water-repellent, reducing water absorption.
Chemical resistance of the forestry fire hose
This hose resists most chemicals, petroleum products, ozone, UV rays, hydrolysis and mold.
Recommended uses of the single-jacket forestry hose
Recommended for forest and brush fires (can be used on fire trucks), for industrial fire protection and for fire cabinets in office or residential towers.
FAQ: forestry fire hose 1.5 in x 50 ft
Why the Mertex treatment inside the hose?
The Mertex process makes the inside very smooth, which reduces friction pressure loss and improves water flow.
Does this hose resist abrasion on rough terrain?
Yes, its Permatek HP-treated exterior increases abrasion resistance and makes it more water-repellent, ideal for forest terrain.
Which standards does this hose comply with?
It complies with NFPA 1961, UL, FM and U.S.D.A. spec 5100-187B type II standards.
Complementary suggestions for forestry and industrial fire hoses
You need complementary safety equipment. See the items; the BF100 forestry (BF100), the BR50 Flashflood (BR50), the BR50Y model (BR50Y).
Under "Accessories" at the bottom of the page. Looking for equipment to work with, see the following products: the Permatek (BM50), the Polyflex (B50), the cabinet (BC100), the unit (BC101) or the nozzle (IBPLE).
BF50
Data sheet
- Product group
- Safety equipment
- Main category
- Fire protection
- Sub category
- Fire hoses and accessories
- Product code
- BF50
- Approved/Certified
- Complies with the following standards: NFPA 1961, Underwriter’s Laboratory (UL), Factory Mutual (FM), and U.S.D.A. spec 5100-187B type II
- Type of thread
- NPSH
- Hose diameter
- 1.5 in / 3.8 cm
- Hose length
- 50 feet
- Resistance
- Resistant to most chemicals, petroleum products, ozone, UV rays, hydrolysis and mold
- Operating pressure
- 300 PSI / 2070 KPa
- Test pressure
- 600 / PSI / 4135 KPa
- Burst pressure
- 900 PSI / 6205 KPa
- Material1
- Synthetic material (Mertex® process)
- Material2
- Aluminum
- Length (in/cm)
- 18 in / 46 cm
- Width (in/cm)
- 12 in / 30.48 cm
- Height (in/cm)
- 3 in / 7.6 cm
- Weight (lb/kg)
- 10 lb / 4.5 Kg
- Return conditions
- No returnable if used. For more information about our return policy, please refer to the "Orders and Returns" link on the home page
New
You might also like
Comments (0)
No customer reviews for the moment.
8 other products in the same category:
Single-jacket forestry fire hose, 1.5 in x 50 ft, aluminium coupling. Mertex and Permatek HP treated, 300 PSI service. NFPA 1961, UL, FM, USDA.