Forestry single-jacket fire hose.
Diameter 1.5 inches x length 100 feet.
Service pressure: 300 PSI. Acceptance test pressure: 600 PSI. Burst pressure: 900 PSI.
The lining of the jacket has been treated with the Mertex process, making it very smooth to minimize pressure losses due to friction. The exterior of the jacket has been treated with Permatek HP to increase its resistance to abrasion and to reduce water absorption by the jacket.
This hose resists most chemicals and petroleum-derived products as well as ozone and UV rays exposure, hydrolysis and mildew.
Standard aluminium coupling.
Recommended for forest and brush fires (may be used on fire trucks), for industrial fire protection, and for fire cabinets in high-rise office or apartment buildings.
Complies with the following standards: NFPA 1961, Underwriter’s Laboratory (UL), Factory Mutual (FM), and U.S.D.A. spec 5100-187B type II.
|Type of product||Safety equipment|
|Main category||Fire protection|
|Sub category||Fire hoses and accessories|
|Approved/Certified||Complies with the following standards: NFPA 1961, Underwriter’s Laboratory (UL), Factory Mutual (FM), and U.S.D.A. spec 5100-187B type II|
|Type of thread||NPSH|
|Hose diameter||1.5 in / 3.8 cm|
|Hose length||100 feet|
|Resistance||Resistant to most chemicals, petroleum products, ozone, UV rays, hydrolysis and mold|
|Operating pressure||300 PSI / 2070 KPa|
|Test pressure||600 / PSI / 4135 KPa|
|Burst pressure||900 PSI / 6205 KPa|
|Material1||Synthetic material (Mertex® process)|
|Length (in/cm)||26 in / 66.04 cm|
|Width (in/cm)||13 in / 33.02 cm|
|Height (in/cm)||3 in / 7.6 cm|
|Weight (lb/kg)||15 lb / 6.80 Kg|
|Return conditions||No returnable if used. For more information about our return policy, please refer to the "Orders and Returns" link on the home page|