100% flame-resistant orange safety coverall, ARC 2, with high-visibility reflective stripes
V1765-36
$181.45
One-piece orange work coverall, 100 % Flame-Gard fire-retardant cotton 10 oz, Arc 2 rated (TPP 11.8 and ATPV 9.5 cal/cm2), high-visibility with StarTech reflective stripes, sizes 36 to 66.
Return conditions:
No returnable if used. For more information about our return policy, please refer to the Orders and Returns.
One-piece orange safety coverall, 100 % flame-resistant cotton, Arc 2 rated, high-visibility for work exposed to electrical arc
Pioneer Flame-Gard coverall, code V1765, sold by unit, special order
This one-piece work coverall in fluorescent orange is designed for workers exposed to flame and electrical arc hazards who must remain highly visible. Arc 2 rated, it provides a thermal protection performance (TPP) value of 11.8 cal/cm2 and an ATPV value of 9.5 cal/cm2 (hazard risk category CAT 2). Available in sizes 36 to 66, selected from the drop-down menu above.
The coverall is made of 100 % Flame-Gard fire-retardant treated cotton, 10 oz (340 g/m2), a rugged fabric whose flame resistance is guaranteed for the life of the garment. Its double stitching is made with intrinsically flame-resistant aramid thread, and its two-way concealed flame-retardant brass zipper rounds out a design built for electrical environments.
Features of the Arc 2 safety coverall
This coverall combines the features expected of a professional protective garment for hot work, electrical work and traffic environments:
- Flame-Gard fabric 10 oz (340 g/m2): 100 % fire-retardant treated cotton, rugged and flame resistant.
- Arc 2 rated: TPP of 11.8 cal/cm2 and ATPV value of 9.5 cal/cm2, hazard risk category CAT 2.
- Fluorescent orange high-visibility color, highly visible during the day and in low-light conditions.
- StarTech high-visibility reflective stripes: 2 vertical lines on the front that enhance worker perception in technical or traffic zones.
- Two-way concealed flame-retardant brass zipper, and double stitching with intrinsically flame-resistant aramid thread.
- 7 pockets (2 chest, 2 side, 2 back and 1 leg), adjustable snap wrist openings and an elastic waistband for added comfort.
- Sizes 36 to 66, men's fit, sold by unit.
Job sites and sectors where this product is required
This flame-resistant coverall is intended for any position where an electrical arc risk assessment calls for an Arc 2 rated garment combined with a high-visibility requirement:
- Work on energized electrical panels and cabinets exposed to electrical arc.
- Industrial maintenance of substations and distribution stations.
- Electrotechnical work outdoors or in road traffic zones.
- Connection and testing on power equipment (motors, drives, breakers).
- Hot work and industrial maintenance where flame protection is required.
Care and inspection of your flame-resistant coverall
Careful maintenance preserves the garment's flame-resistant properties. Before washing, empty the pockets and close the zipper. Wash in lukewarm water with similar colors, using a mild liquid detergent. Do not use detergent containing chlorine or hydrogen-peroxide based bleaching agents, nor chlorine bleach. Do not use fabric softener, starch or dryer sheets, as they impair the garment's flame-resistant properties. Cover the retroreflective tape before any ironing. Inspect the garment before each use for cuts, burns or excessive wear.
FAQ: Frequently asked questions about the Arc 2 flame-resistant coverall
Which standards does this coverall comply with?
This coverall complies with CGSB 155.20-2000, NFPA 70E, CSA Z462-15 and ASTM F1506. It is Arc 2 rated (hazard risk category CAT 2) with an ATPV value of 9.5 cal/cm2 and a thermal protection performance (TPP) value of 11.8 cal/cm2.
Is the orange coverall a high-visibility garment?
Yes. Fluorescent orange is a high-visibility color, highly perceptible during the day and in low-light conditions, reinforced by the StarTech reflective stripes. It therefore suits positions that combine electrical arc risk with the need to be seen, especially in traffic zones.
How do I choose my size?
The coverall is available in sizes 36 to 66, men's fit. Select your size from the drop-down menu at the top of the page. If you are between two sizes, choose the larger one to keep freedom of movement over your other clothing.
Complementary suggestions
To complete your protection, shield your hands with Arc 2 flame-resistant gloves with neoprene palm (GS13FRNE). If you prefer a two-piece outfit, see the FR-Tech Pioneer 7 oz shirt (V131) and its matching cargo pants (V7764). For another one-piece option, compare with the blue cotton coverall (V1766) or the women's royal blue coverall (V7704F). Since the electrical work zone must always be delimited, mark it off with a signaling cone (EPTCONE), an expandable barricade (EPT195) and a high-tension danger sign (ECD401). Under Accessories at the bottom of the page.
V1765-36
Data sheet
- Product group
- Safety equipment
- Main category
- Personal protection
- Sub category
- Safety clothing
- Sub sub category
- Pants, shirt, coverall
- Name of the product
- Coveralls with reflective strips
- Series of products
- Flame-Gard®
- Product code
- V1765
- Sort by keywords
- Traffic combinations
- Approved/Certified
- Complies with CGSB 155.20-2000, NFPA 70E, CSA Z462-15, ASTM F1506-10A, CSA Z96-15
- Manufacturer
- Pioneer®
- Country of origin
- Unknown origin
- Thermal protection
- TPP value:11.8 cal/cm² ARC ATPV 9.5 cal/cm² CAT2
- About APTV and TPP values-1
- We have observed differences between the values given in the manufacturer's data sheets for APTV and TPP. These values may vary according to the different standards considered
- About APTV and TPP values-2
- These values are subject to change according to the evolution of tests established according to the reference year of the said standard. The values displayed on our website correspond to those indicated on the garments
- Type of seam
- Double stitching with aramid thread (flame retardant)
- Fineness of the knitting
- Flame Gard® 10 oz (340 gsm) fire-retardant cotton
- Choice of format
- Available sizes: 36 to 66
- Gender
- Male
- Features
- With high visibility reflective stripes (2 vertical lines on chest, "X" on back, stripes around waist, arms and legs)
- Additional Features
- This suit has 7 pockets (2 chest pockets, 2 side slash pockets, 2 back pockets, 1 tool pocket) and 1 chest strap for attaching radio
- Comfort features
- Front closure with concealed two-way zipper. Elastic waistband for added comfort
- Features on zips, buttons and hook-and-loop fasteners
- Flame-retardant brass zipper
- Precision on the color of the material and their visibilities
- Fluorescent orange is very visible during the day and in conditions with a lot of artificial light. In most situations, it also provides high contrast with the background
- Includes
- The wrist openings are adjustable with snaps, while the ankle openings have no fasteners. The suit has two side openings for pants
- Includes 2
- An elastic band at the waist allows more comfort
- Property of the material
- Fire retardant
- Classification
- Class 3, Level FR
- Fireproof material
- Fire retardant fabric
- Material1
- 100% fire retardant treated cotton
- Material2
- The reflective strips are made of StarTech®
- Washable
- Wash in lukewarm water with similar colors and do not exceed (104⁰F or 40⁰C). Wash Use a mild liquid detergent (PH of 10 and below). Do not use detergents containing bleach or animal fat
- Washable2
- Do not use bleaches containing chlorine (sodium hypochlorite) or hydrogen peroxide in the wash cycle. Do not use fabric softeners, as they render garments flammable
- Drying
- Do not use fabric softeners, starch and/or fabric softener sheets. Garments can be iron-pressed, tumble-dried, tunnel-dried or hung in a cool place
- Drying2
- Cover retroreflective tape before ironing. As far as the drying temperature is concerned, it should not exceed 149⁰F or 65⁰C. Use the "cotton" setting for drying. Do not over-dry. Do not use starch during drying
- Before/after washing tips
- Before washing, be sure to empty all garment pockets and close all zippers, snaps and hook-and-loop fasteners. After washing, shake the garment to remove wrinkles and hang to dry in a cool, well-ventilated place
- Dimensions of the product
- The dimensions of the product depend on the size selected by the customer.
- Length (in/cm)
- 16 in / 40.6 cm
- Width (in/cm)
- 12 in / 30.48 cm
- Height (in/cm)
- 3 in / 7.6 cm
- Weight (lb/kg)
- 5 lb / 2.26 Kg
- Availability
- Please note: Available only on special order. No exchange or refund. Allow 3 to 5 business days for delivery
- Sold by
- Unit
- Color
- Orange/Gray/Yellow
- Return conditions
- No returnable
Specific References
- upc
- 626053527495
New
You might also like
- -$20.20
Comments (0)
No customer reviews for the moment.
8 other products in the same category:
Customers who bought this product also bought:
One-piece orange work coverall, 100 % Flame-Gard fire-retardant cotton 10 oz, Arc 2 rated (TPP 11.8 and ATPV 9.5 cal/cm2), high-visibility with StarTech reflective stripes, sizes 36 to 66.