- New
3M DBI-SALA Coated Y Arc Flash Shock Lanyard 6 ft 1246600C
FPL1246600C
$589.55
3M DBI-SALA 1246600C 6 ft coated arc flash twin-leg shock absorbing lanyard with internal shock absorber, aluminum connectors and CSA Z259.11 compliance.
Return conditions:
No returnable if used. For more information about our return policy, please refer to the Orders and Returns.
3M DBI-SALA 1246600C Coated Arc Flash Y Lanyard, 6 ft
3M manufacturer code: 7100329218, model 1246600C
This 3M DBI-SALA coated Y lanyard is designed for work at height where arc flash exposure must be considered. Its twin-leg configuration helps the worker remain connected during transfers between compatible anchorage points. Model 1246600C combines a 6 ft working length, an internal shock absorber and aluminum connectors.
Applications for the 3M DBI-SALA 1246600C Arc Flash Lanyard
This lanyard is relevant for electrical work, welding, grinding, construction, general industry, metal fabrication, utilities, transportation, oil and gas, mining and wind energy. It must be used with a harness, anchorage and procedures compatible with the fall protection program. It does not replace the equipment required for protection against electrical contact.
Verified Details of the 6 ft Coated Y Lanyard
- Twin-leg lanyard with internal shock absorber
- Working length: 6 ft / 1.82 m
- Capacity: 132 to 310 lb / 59.9 to 140.6 kg
- Load capacity: 310 lb / 140 kg
- Lifeline material: webbing
- Lanyard material: coated webbing
- Anchorage connection: rebar hook
- Harness connection: snap hook
- Connector materials: aluminum and anodized aluminum
- Colour: yellow
- Compliant with CSA Z259.11
- 3M RFID system and protected labels
Precautions for a Twin-Leg Fall Arrest Lanyard
Inspect the lanyard, coated webbing, shock absorber, labels and connectors before each use. Confirm that all components used together are compatible and that the anchorage point is suited to the work being performed. Any lanyard showing abnormal wear or that has arrested a fall must be removed from service according to the applicable instructions.
FAQ: 3M DBI-SALA 1246600C Y Lanyard
What is the working length of this lanyard?
Model 1246600C has a working length of 6 ft, or 1.82 m.
What worker capacity is listed for this model?
The listed range is 132 to 310 lb, or 59.9 to 140.6 kg, including clothing, tools and equipment.
What connectors are listed for this lanyard?
The lanyard uses a rebar hook for the anchorage connection and a snap hook for the harness connection.
Is this lanyard compliant with a CSA standard?
Yes. Model 1246600C is listed as compliant with CSA Z259.11.
Which work applications is this lanyard used for?
It is used for electrical work, welding and grinding when the complete fall protection system is compatible with the jobsite.
Complementary Suggestions for This Arc Flash Lanyard:
A power line worker connecting with this DBI-SALA 3M lanyard completes personal protection with a flame-resistant garment (V7764) required on this type of site, a helmet (TA80) held by its chinstrap (TA80CS), cut-resistant gloves (GS18WTFN), safety eyewear (YASF201) and corded earplugs (OA101) that stay around the neck and cannot drop from height.
For the lanyard to work in a complete fall arrest system, plan a DBI-SALA 3M harness (FPH140205XCALP), a DBI-SALA 3M fixed anchor (FPA2100215), a second DBI-SALA 3M complementary anchor (FPA8517412), a 50 ft RollGliss R550 rescue (FPLR550) and descent device for emergency lowering, a DANGER barricade tape (ECT3RE9) to cordon off the ground area and the sign (ECO130) reminding that the harness is mandatory.
FPL1246600C
Data sheet
- Product group
- Safety equipment
- Main category
- Personal protection
- Sub category
- Fall protection
- Sub sub category
- Lanyards
- Name of the product
- Y-shaped double lanyard with energy absorber
- Product code
- FPL1246600C
- Product use
- Electrical work, welding and grinding
- Approved/Certified
- CSA Z259.11
- Manufacturer
- 3M DBI-SALA
- Country of origin
- United State of America
- Format
- 6 ft / 1.8 m
- Types of lanyards
- Y-shaped double lanyard
- Features
- The shock absorber deploys by controlled tearing to reduce fall arrest force
- Characteristics of the strap or cable
- Coated twin-leg webbing
- Carabiners characteristics
- Aluminum rebar hook anchorage connection and aluminum snap hook harness connection
- Feature that facilitates use
- 3M RFID system for inspection tracking with a compatible reader
- Includes
- With internal shock absorber
- Worker’s weight
- 130 to 310 lbs / 59 to 140 kg (including tools and equipment)
- Material1
- Webbing
- Material2
- Aluminum
- Length (in/cm)
- 17 in / 43.18 cm
- Width (in/cm)
- 13 in / 33.02 cm
- Height (in/cm)
- 8 in / 20.32 cm
- Weight (lb/kg)
- 5.05 lb / 2.29 kg
- Sold by
- Unit
- Color
- Yellow
- Caution
- Maximum supported worker weight from 132 lb to 310 lb / 59.9 kg to 140.6 kg, including clothing, tools and equipment
You might also like
Comments (0)
No customer reviews for the moment.
8 other products in the same category:
3M DBI-SALA 1246600C 6 ft coated arc flash twin-leg shock absorbing lanyard with internal shock absorber, aluminum connectors and CSA Z259.11 compliance.