compare_arrows

Brady 65965 Electrical lockout device, pack of 6

Reference : CAC65965
$80.75

This item is not stocked: allow 5 to 7 days for delivery.

Pack of 6 Brady 65965 clamp-on circuit breaker lockouts in red polypropylene. Extremely versatile, they work on a wide range of single-pole and internal-trip multi-pole 120/277 V breakers. The detachable cleat supplied expands the range of compatible breakers even further. Handy for equipping a team of electricians or locking out several circuits at once. Each pack contains 6 lockouts, made in the United States.

Quantity

Brady 65965 Electrical lockout device, pack of 6

This item is not stocked: allow 5 to 7 days for delivery.

Brady model: 65965. This pack contains 6 red clamp-on lockouts that tighten onto a circuit breaker switch to hold it in the open position during maintenance. They work on a wide range of single-pole and internal-trip multi-pole 120/277 V breakers. A detachable cleat, included, expands the range of compatible breakers even further. The red polypropylene stays highly visible in the panel.

Features of the Brady 65965 clamp-on lockouts

  • 6 lockouts per pack.
  • For single-pole and internal-trip multi-pole breakers.
  • Voltage: 120/277 V.
  • Detachable cleat included to expand the range of breakers.
  • Highly visible red polypropylene.

Applications of clamp-on lockouts

This pack of six clamp-on lockouts fits suitable 120/277 V breakers, depending on the handle geometry. The maximum switch width is 0.65 in. For 480/600 V applications and a maximum switch width of 1.5 in, the Brady 65966 provides a different size. Both configurations include a removable cleat. Select the lockout according to circuit voltage and handle geometry.

Brady 65965 lockouts technical specifications

CharacteristicValue
Height0.95 in / 2.41 cm
Length / depth2.2 in / 5.6 cm
Width1 in / 2.54 cm
Published model dimensions (H X W X D)0.95 in H X 2.205 in W X 1.0 in D
Packaged dimensions5 X 1 X 3 in
Packaged weight0.2 lb / 0.09 kg
Main materialPolypropylene
ManufacturerBrady
Country of originUnited State of America
Sold byPack of 6 units
CharacteristicFor single-pole and internal-trip multi-pole breakers

Using and caring for the clamp-on lockouts

Open the circuit breaker according to your written procedure. Place the lockout on the switch, add the detachable cleat if the breaker shape requires it, tighten the clamp, then apply your padlock and your lockout tag. Verify the absence of voltage before starting work. Replace any lockout that is cracked or no longer clamps firmly.

Flip-cover mechanism and removable cleat

The thumbwheel tightens the clamp onto the handle without a screwdriver. The flip cover then covers the thumbwheel and accepts the padlock to prevent loosening. Keep the included removable cleat with the device: it adapts the grip to certain breaker configurations. Before preparing the six lockouts for a job, compare the handle shape and width with the capacity of the selected model. The stated voltage alone does not establish mechanical compatibility with every breaker in a panel. Check that the attachment is retained correctly, then follow the applicable isolation and verification procedure.

FAQ: Brady 65965 clamp-on lockouts

How many lockouts does the pack contain?

Six lockouts.

Which circuit breakers do they fit?

A wide range of single-pole and internal-trip multi-pole 120/277 V breakers.

What is the detachable cleat for?

It is included and expands the range of breakers on which the lockout can be installed.

What are they made of?

Red polypropylene; they are made in the United States.

What is the delivery time?

The pack is not stocked: allow 5 to 7 days for delivery.

Suggestions for electrical panel lockout

For the team locking out several breakers at once, depending on the hazards of the job, plan for 3M SecureFit safety glasses (YASF401), Ansell HyFlex foam nitrile gloves (G11800), Pioneer FR-Tech navy blue flame-retardant cargo pants (V7762), Moldex Meteors uncorded earplugs (OA6870) and a Pioneer cotton coverall (V5133).

For personal lockout, the padlock (CA1ZKD1) model with a Zenex body and nylon shackle provides a keyed-different option. If your procedure instead calls for an aluminium body, select the red model (CA1ARG) with a 1/4 in shackle, checking its fit in the device. Complete the identification with the tags (CAET5) bearing the French DANGER NE PAS OPÉRER message. These accessories complement the workstation’s lockout program; padlocks are not included with the device.

The texts coloured in green correspond to hyperlinks leading to specific safety equipment or to a general information link.

CAC65965

Data sheet

Product group
Safety equipment
Main category
Industrial accessories
Sub category
Locking and lockout
Name of the product
Clamp-on lockout, circuit breaker type
Product code
CAC65965
Sort by keywords
Circuit-breaker locks
Product use
Locking energy-isolating devices during lockout
Manufacturer
Brady
Country of origin
China
Format
Clamp-on, 120/277 V
Features
Single-pole and internal-trip multi-pole breakers; maximum switch width 0.65 in
Includes
Detachable cleat
Operating temperature
From -4 to 176 °F / -20.00 to 80.00 °C
Material1
Polypropylene
Length (in/cm)
2.2 in / 5.6 cm
Width (in/cm)
1 in / 2.54 cm
Height (in/cm)
0.95 in / 2.41 cm
Weight (lb/kg)
0.2 lb / 0.09 kg
Sold by
Pack of 6 units
Color
Red
HS Code
3926.90.9989
Return conditions
Not returnable if used. For more information about our return policy, please refer to the "Orders and Returns" link on the home page
Compatible padlocks
1 padlock per lockout

Specific References

UPC
754473659653
MPN
65965

You might also like

Comments (0)
No customer reviews for the moment.