Class 3 TDG placard, blank UN box, 10-3/4 in X 10-3/4 in, cardboard, plastic or vinyl

Class 3 TDG placard with blank UN box, 10-3/4 in X 10-3/4 in

This item is not kept in stock. Please allow 5 days for delivery.

This TDG placard identifies a load of class 3 flammable liquids. Its UN box is blank: you display the number of the material carried, so you do not need a pre-printed placard for each number. It shows the flame symbol and the class number 3 on a red 10-3/4 X 10-3/4 in diamond that fits most placard holders. Made in Canada, it is sold individually.

Features of the class 3 placard with blank UN box

• Blank UN box to display the number of the material carried.
• Flame symbol and class number 3, flammable liquids.
• 10-3/4 X 10-3/4 in diamond, the standard placard holder size.
• Three materials: low-cost cardboard, reusable rigid plastic or permanent self-adhesive vinyl.
• One model for several class 3 flammable liquids.

Available formats: cardboard, rigid plastic or self-adhesive vinyl

Aluminum placard available on request: contact customer service for a quote.

Class 3 placard with blank UN box applications

This placard is intended for distributors and carriers shipping several class 3 flammable liquids: fuels, solvents, paints, adhesives. Cardboard is handy for a one-time load, rigid plastic is reused from one trip to the next in a placard holder, and self-adhesive vinyl stays in place on a tank. For the most common numbers, a pre-printed placard avoids writing in the number.

Complete your display with a 10-3/4 in aluminum (ECLAP) placard holder, the class 3 placard (ECLA3) without a UN box, and pre-printed placards for common numbers, such as UN1203 gasoline (ECLA1203) or UN1202 diesel (ECLA1202).

Class 3 placard with blank UN box technical specifications

Placard installation and care

Keep the UN box clean and the number legible. Apply the self-adhesive vinyl to a clean, dry surface. Replace the placard if it is damaged, faded or if the number becomes illegible; for long exposure to the weather, choose rigid plastic or vinyl over cardboard.

FAQ: class 3 placard with blank UN box

Is the UN number printed on this placard?

No. The UN box is blank: you display the number of the material shown on the shipping document.

Which products is this placard for?

Class 3 flammable liquids. The number displayed must match the shipping document.

Which material should I choose: cardboard, plastic or vinyl?

Cardboard for temporary use, rigid plastic for a placard reused in a placard holder, self-adhesive vinyl for permanent application on a tank or trailer.

Does the placard fit in a placard holder?

Yes. Its 10-3/4 X 10-3/4 in format fits most placard holders.

Are pre-numbered placards available?

Yes, for the most common numbers, such as UN1203 for gasoline or UN1202 for diesel.

Suggestions for flammable liquid transport

For the driver or handler who deals with flammable liquids at loading, delivery or in the warehouse, plan for Centurion splash goggles (YG454), a 6000 series full face respirator (R6800) with organic vapour cartridges (R60921), selected according to the SDS and the risk assessment, 18 in nitrile gloves (GL37185), waterproof PVC steel toe boots (VC18821C) and a flame-resistant high-visibility vest (VV510FR) to stay visible on the road and at the loading station.

To contain and respond to a spill, keep pads (ABCT100) and socks (ABCB30) for corrosive or hazardous chemicals close at hand, a universal mini spill kit for truckers (ABUV) in a resealable bag, to keep in the truck, Magic Monkey mineral absorbent (ABGMM225), a 10 lb ABC dry chemical (EXABC10) extinguisher or a 10 lb CO₂ (EXCO10) unit, and 28 in traffic cones (EPTCONE28B) to mark off the perimeter.

The texts coloured in green correspond to hyperlinks leading to specific safety equipment or to a general information link.