Placard with UN1993 number (flammable liquid, N.O.S.), 10-3/4 in X 10-3/4 in, for the transportation of dangerous goods

UN1993 placard for flammable liquids, class 3, 10-3/4 in X 10-3/4 in

This item is not kept in stock. Please allow 5 days for delivery.

The UN1993 placard identifies a load of flammable liquid, N.O.S., class 3, on trucks and tanks delivering solvents, technical preparations and flammable blends without a more specific shipping name. It shows the number 1993 in black in its white box, the flame symbol and the class number 3, on a red 10-3/4 X 10-3/4 in diamond that fits most placard holders. Made in Canada, it is sold individually.

Features of the pre-printed UN1993 placard

• UN1993 number pre-printed with the flame symbol and the class number 3: no digits to apply yourself.
• 10-3/4 X 10-3/4 in diamond, the standard size that fits most placard holders.
• High-contrast printing, legible from a distance.
• Three materials: low-cost cardboard, reusable rigid plastic or permanent self-adhesive vinyl.
• Designed, according to the manufacturer, for the Canadian TDG Regulations, the US DOT and the IMDG, IATA and ICAO codes: convenient for cross-border transport.

Available formats: cardboard, rigid plastic or self-adhesive vinyl

Aluminum placard available on request: contact customer service for a quote.

Flammable liquids in transport and storage: what to do in case of a spill

UN number 1993 corresponds to the shipping name FLAMMABLE LIQUID, N.O.S., class 3, packing group I, II or III depending on the product. This generic name is used for flammable liquids and blends without a more specific shipping name, such as process solvents or technical preparations; it does not mean gasoline or diesel. Transport Canada's 2024 Emergency Response Guidebook (ERG) places it under guide 128: vapours can form an explosive mixture and ignite far from the spill, and a fire can release toxic fumes.

In case of a spill during transport or in your storage area, guide 128 calls for dialing 911, then the emergency number on the shipping document, and isolating at least 50 m around the leak. Eliminate all ignition sources (cigarettes, road flares, sparks, flames), ground the handling equipment, do not touch the product and, if you can do it without risk, stop the leak. Keep the liquid out of waterways, sewers, basements and confined areas. Absorb or cover the liquid with dry earth, sand or another non-combustible material, then transfer it into containers with clean non-sparking tools. For a large spill, dike far ahead of the liquid and consider an initial evacuation of 300 m downwind.

Keep a mineral absorbent (ABGMM225) in the vehicle and near the storage area to cover the liquid, along with chemical socks (ABCB30) and pads (ABCT100) to contain the flow; check their compatibility with the product's safety data sheet.

Fire safety for flammable liquids: which extinguisher to keep in the vehicle and at the warehouse

For a small fire, guide 128 names dry chemical and CO₂ among the extinguishing agents: an ABC dry chemical (EXABC10) extinguisher or a CO₂ (EXCO10) unit is therefore the right choice. Place it in the vehicle cab and at an accessible spot near the storage area, outside the hazard zone. A large fire is a job for firefighters. If a tank, rail tank car or highway tank is involved in a fire, the guide calls for isolating 800 m in all directions and considering an initial evacuation over the same distance.

These guidelines from the 2024 ERG help you prepare your transport and storage procedures. For the exact product and the real situation, the current safety data sheet and the ERG prevail; emergency measures are for trained and equipped personnel, with a positive pressure self-contained breathing apparatus (SCBA), as the guide specifies.

UN1993 placard applications

The UN1993 placard is intended for solvent and chemical distributors, technical preparation manufacturers and dangerous goods carriers shipping a variety of flammable blends. Cardboard is handy for a one-time load, rigid plastic is reused from one trip to the next, and self-adhesive vinyl stays in place on a tank dedicated to these liquids.

Complete your display with an aluminum flip chart placard, with five (ECLAP5) legends including class 3, or fourteen (ECLAP14) legends, for trucks whose cargo changes; the class 3 placard with a blank (ECLA3UN) UN box, to write in a number yourself; the class 3 flammable liquid placard (ECLA3); and the yellow and black warning tape (ECT751JN108) to mark off the storage area.

UN1993 placard technical specifications

Placard installation and care

Apply the self-adhesive vinyl to a clean, dry surface. Keep the placard clean so the number stays legible, and replace it if it is damaged, faded or illegible. For a placard exposed to the weather for a long time, choose rigid plastic or vinyl over cardboard.

FAQ: UN1993 placard and flammable liquids transport

Which material should I choose for the UN1993 placard: cardboard, plastic or vinyl?

Cardboard is the low-cost option for temporary use. Rigid plastic is weatherproof and reusable. Self-adhesive vinyl suits permanent application on a tank or trailer.

Why is the UN1993 placard so common?

Because entry UN1993 covers many flammable blends without their own shipping name. The shipping document gives the product's technical name, and the safety data sheet details its hazards.

What safety perimeter is needed for a spill of the liquid?

Guide 128 of the 2024 ERG calls for isolating at least 50 m around the leak. For a large spill, consider an evacuation of 300 m downwind, and 800 m in all directions if a tank is on fire.

Which extinguisher should I keep in a vehicle carrying the liquid?

For a small fire, an ABC or BC dry chemical extinguisher, or a CO₂ extinguisher. A large fire is a job for firefighters: move away and dial 911.

Does the UN1993 placard fit in a placard holder?

Yes. Its 10-3/4 X 10-3/4 in format is the standard size that fits most placard holders.

Suggestions for transport and storage of flammable liquids

For the driver or handler who deals with the liquid at loading, delivery or in the warehouse, plan for Centurion splash goggles (YG454), a 6000 series full face respirator (R6800) with organic vapour cartridges (R60921), selected according to the SDS and the risk assessment, 18 in nitrile gloves (GL37185), waterproof PVC steel toe boots (VC18821C) and a flame-resistant high-visibility vest (VV510FR) to stay visible on the road and at the loading station.

To contain and respond to a spill, keep sheets (ABCT100) and snakes (ABCB30) for corrosive or hazardous chemicals close at hand, a universal mini spill kit for truckers (ABUV) in a resealable bag, to keep in the truck, Magic Monkey mineral granules (ABGMM225), a 10 lb ABC dry chem (EXABC10) extinguisher or a 10 lb dioxide (EXCO10) unit, and 28 in traffic cones (EPTCONE28B) to mark off the perimeter. For a driver working in isolation: the type 1 personal (TR01) first aid kit suits an isolated worker with no access to another kit, a vehicle with 1 to 5 workers, or a vehicle with more than 5 workers less than 30 minutes from medical services; for a vehicle with more than 5 workers more than 30 minutes from medical services, provide the type 2 basic (TR02M) first aid kit. Complete the truck's equipment with a portable road safety kit (TR16) and the set of three removable reflectors (EPTR) to signal a stopped vehicle.

The texts coloured in green correspond to hyperlinks leading to specific safety equipment or to a general information link.