Non-flammable and non-toxic gases placards class 2.2 with blank UN number panel

Non-flammable and non-toxic gases placards class 2.2 with blank UN number panel, 10-3/4 in X 10-3/4 in

This item is not kept in stock. Please allow 5 days for delivery.

This TDG placard identifies a load of class 2.2 non-flammable and non-toxic gases. It shows the gas cylinder symbol and the class number 2 on a green 10-3/4 X 10-3/4 in diamond that fits most placard holders. Its blank panel takes the UN number of the material shown on the shipping document, which you compose with the self-adhesive digits ECLACH-0 to ECLACH-9. Made in Canada, it is sold individually.

Features of the class 2.2 non-flammable gases placard

• Gas cylinder symbol and class number 2, non-flammable and non-toxic gases.
• Blank panel to apply the UN number of the material carried.
• 10-3/4 X 10-3/4 in diamond, the standard placard holder size.
• Three materials: low-cost cardboard, reusable rigid plastic or permanent self-adhesive vinyl.
• Compliant, according to the manufacturer, with Transport Canada's TDG Regulations, US DOT and the IMDG, IATA and ICAO codes.

Available formats: cardboard, rigid plastic or self-adhesive vinyl, with blank UN number panel

Class 2.2 non-flammable gases placard applications

This placard is intended for carriers and shippers of class 2.2 non-flammable and non-toxic gases, in Canada and internationally: transport by vehicle or tank, cross-border, marine and air shipments. The UN number is applied in the panel with the black-on-white self-adhesive digits ECLACH-0 to ECLACH-9, sold in packs of 50 identical digits (ECLACHIFFRES), or with the 500-digit kit (ECLAUNNUM). To display the class only, the version without a UN box is offered on the class 2.2 non-flammable and non-toxic gases placards (ECLA2.2) listing.

Complete your display with the 10-3/4 in aluminum placard holder (ECLAP), and the aluminum five-legend placard (ECLAP5) or the fourteen-legend placard (ECLAP14), for vehicles whose cargo changes.

Class 2.2 non-flammable gases placard technical specifications

Installing the non-flammable gas placard

Apply the UN number digits in the clean, dry panel, then check the number composed against the shipping document before departure. Apply the self-adhesive vinyl to a clean, dry surface. Keep the placard clean so it stays legible, and replace it if it is damaged, faded or illegible. For a placard exposed to the weather for a long time, choose rigid plastic or vinyl over cardboard.

FAQ: class 2.2 non-flammable gases placard

What is the difference with the placard without a UN box?

This placard has a blank panel to apply the UN number of the material shown on the shipping document. To display the class only, choose the placard without a UN box (ECLA2.2).

How do I write the number in the blank panel?

With the black-on-white self-adhesive digits ECLACH-0 to ECLACH-9, sold in packs of 50 identical digits (ECLACHIFFRES), or with the 500-digit kit (ECLAUNNUM).

Which material should I choose: cardboard, plastic or vinyl?

Cardboard for temporary use, rigid plastic for a placard reused in a placard holder, self-adhesive vinyl for permanent application on a tank or vehicle.

Does the placard fit in a placard holder?

Yes. Its 10-3/4 X 10-3/4 in format fits most placard holders.

Is this placard suitable for international shipments?

According to the manufacturer, it complies with the TDG Regulations, US DOT and the IMDG, IATA and ICAO codes. Always check the requirements that apply to your shipment.

Suggestions for transport of compressed gases

For the driver or handler who applies placards, composes the UN number and handles gas cylinders and containers at loading, delivery or in the warehouse, plan for 3M Solus clear anti-fog safety glasses (YAS1101), an MSA V-Gard type 1 class E safety helmet (TA80), cowhide leather gloves (G300) with safety cuffs for handling cylinders, Dunlop waterproof PVC steel toe boots (VC18820) and a Pioneer 6935 detachable high-visibility vest (V6935) to stay visible on the road and at the loading station.

To fill in the UN number in the blank panel, use the black-on-white UN numbering kit (ECLAUNNUM) of 500 self-adhesive digits or the self-adhesive UN digits (ECLACHIFFRES) sold in packs of 50. A gas leak cannot be recovered with an absorbent: to respond to an incident on the road, secure the vehicle with rubber wheel chocks (EPC32), signal it with the set of three removable reflectors (EPTR), mark off the perimeter with 18 in reflective traffic cones (EPTCONE) linked by the Tensacone retractable red and white striped belt (EPTCT), and keep people away with a 120 dB signal horn (EPMAV). The choice of first aid kit depends on working conditions and access to medical services. Under CNESST criteria, the type 1 personal (TR01) first aid kit suits an isolated worker with no access to another kit, a vehicle with 1 to 5 workers, or a vehicle with more than 5 workers less than 30 minutes from medical services; for a vehicle with more than 5 workers more than 30 minutes from medical services, provide the type 2 basic (TR02M) first aid kit. Complete the truck's equipment with a portable road safety kit (TR16) and a UK4AA-eLED anti-explosion flashlight (LL01), intrinsically safe for Class 1, Div. 1, to light the scene at night. The perimeter and the measures to take depend on the material: check the 2024 ERG guide shown for the UN number on the shipping document.

The texts coloured in green correspond to hyperlinks leading to specific safety equipment or to a general information link.