Temporary anchorage for workers who work on houses with sloping roofs, 310 lb max


Return conditions : No returnable if used. For more information about our return policy, please refer to the "Orders and Returns" link on the home page

Peakworks brand temporary roof anchor connector. The maximum weight of the worker who can use this anchor is 310 lb (141 kg), including clothing, tools, etc. Sold individually.

Peakworks manufacturer code: V8229001, model: RB-9701. Complies with CSA Z259.15 and ANSI Z359.18 standards. Designed to resist static forces of 5000 lb (22 KN).

According to the manufacturer, this anchor must be installed on structural parts of the sloped roof, it can be placed directly on the wood or on the sheet metal covering the wood. It is indicated to use 8 x 3 ½" 16 d nails to secure it. Do not install too close to the end of the roof. At the end of the work, it can remain on the roof but the attachment ring must be folded up to make it unusable and the whole thing covered with shingles.

About the anchor point:

The anchor point should preferably be located above the level of the harness back ring and should be positioned vertically to the user. The worker should remain below the anchor point so that he/she remains within a perimeter of no more than a 45 degree angle.

It is important that the user be aware of the risks of a possible fall. Among other things, is there a sufficient distance below the worker that is free of obstacles? Are there emergency measures in place to quickly recover the worker? Can the anchor point withstand a force of 5000 lb? For more information, consult the manufacturer's manual.
Any equipment that is subject to a fall or impact must be taken out of service.


To complete your fall protection you will find a range of harnesslanyards and self-retracting lanyards. Some products are suggested under the "accessories" tab at the bottom of this page.

Other equipment frequently used with this safety harness:

Safety glasses YA12E91001
Liberty TA14LR safety helmet and the essential TA14CS chin strap
EPTCONE28B Traffic Cones
Peakworks FPBAG storage bag
The FPL9901 Tool Strap

The texts coloured in green correspond to hyperlinks leading to specific safety equipment or to a general information link.

Type of productSafety equipment
Main categoryPersonal protection
Sub categoryFall protection
Sub sub categoryAnchorage & connectors
Name of the productRoof anchor
Product codeFPA828
Approved/CertifiedComplies with CSA Z259.15-17 and ANSI Z359.1-2007 standards
Country of originChina
Maintenance freeFold back the fastener ring and cover with shingles at the end of the work
FeaturesTemporary anchor connector for sloped roof
Characteristic adding safetyDesigned to withstand static forces of 5000 lbs (22 KN)
Worker’s weight310 lb / 140 Kg maximum
WashableHand wash with warm water and soap
Length (in/cm)12 in / 30.48 cm
Width (in/cm)12 in / 30.48 cm
Height (in/cm)3 in / 7.6 cm
Weight (lb/kg)1.5 lb / 0.7 Kg
Sold byUnit
Return conditionsNo returnable if used. For more information about our return policy, please refer to the "Orders and Returns" link on the home page
CautionThe maximum weight supported is 310 lb / 141 kg, which includes the weight of tools and any other equipment carried by the worker


4 other products in the same category: