Protective filter cover for 3M series TR-6300 combined cartridges

Protective Cover 3M Versaflo TR 600 compatible with TR 6300

Sold individually. This item is not kept in inventory; please allow 2 to 3 weeks for delivery.

3M Manufacturer Code: TR‑6300FC

The protective cover is an essential accessory for securing and optimizing the use of powered air purifying motors of the TR 600 series. Designed to be used with TR 6300 combination cartridges, it effectively protects the filter against impacts, splashes, and physical damage that could reduce system performance.

Thanks to its robust design and direct compatibility with 3M Versaflo powered air respirators, this cover ensures reliable use in high‑risk environments. It also allows the use of prefilters and spark arrestors, further improving the longevity of the respiratory system. The new Versaflo is NIOSH certified without a protective cover. However, installing a cover is necessary for certain industries. The cover was designed to protect the combination cartridge from impacts that could damage it. It also protects the cartridge from liquid splashes. If you need to use a spark arrestor or a prefilter, the use of this cover is essential. In addition, the use of the cover is required if the worker must pass under a decontamination shower.

Find the cartridges compatible:

• Combined HEPA/acid gas/organic vapor cartridge (RVTR6530N)
• 3M combined HEPA cartridge for acid gases (RVTR6320N)
• Combination HEPA cartridge for ammonia and methylamine (RVTR6360N)
• Combination HEPA cartridge for formaldehyde vapors and organic vapors (RVTR6350N)

Features of the 3M Versaflo TR 600 Protective Cover for TR 6300 Filters

The 3M Versaflo TR 600 protective cover stands out for its ability to effectively protect filters against physical damage and splashes. It is compatible with filters and cartridges of the TR 6300 series and allows the addition of prefilters or spark arrestors for enhanced protection. Its quick‑view window makes it easy to inspect the filter label, simplifying the management and tracking of consumables. Designed for high‑risk industrial environments, this cover ensures reliable protection of the TR 600 motor and helps extend the lifespan of the respiratory system.

Installing the 3M Versaflo TR 600 Protective Cover

Installing the 3M Versaflo TR 600 protective cover is simple and quick. Just position the cover on the TR 6300 cartridge or compatible filter, then snap it firmly into place until it is properly secured. The ergonomic design of the cover ensures a stable and secure fit, providing optimal protection for the motor and filters during use.

Maintenance and Replacement of the 3M Versaflo TR 600 Protective Cover

The 3M Versaflo TR 600 protective cover requires no special maintenance. It should be cleaned regularly with a soft, dry cloth to remove dust and residue. In case of cracks, wear, or deformation, it is recommended to replace it immediately to ensure protection of the TR 600 motor and TR 6300 cartridges. A cover in good condition helps maintain the performance of the respiratory system.

Usage Recommendations for the 3M Versaflo TR 600 Protective Cover

 For optimal use, the 3M Versaflo TR 600 protective cover must always be installed before using the TR 600 motor. It is recommended to regularly check its condition to ensure it effectively protects the TR 6300 filters and cartridges. This cover is particularly useful in environments where splashes, projections, or impacts are frequent. It helps extend the lifespan of the Versaflo system and maintain reliable respiratory protection.

FAQ about the 3M Versaflo TR 600 Protective Cover compatible with TR 6300

Is the 3M Versaflo TR 600 cover compatible with TR 6300 cartridges?

 Yes, it is designed to be used directly with TR 6300 combination cartridges and TR 600 series filters.

Does the TR 600 cover protect against splashes and impacts?

 Yes, it protects the filter and motor against physical damage, splashes, and projections, which extends the system’s lifespan.

Can prefilters or spark arrestors be used with this cover?

 Yes, the TR 600 cover allows the use of prefilters and spark arrestors to reinforce the protection of the respiratory system.

Complementary suggestions

Need additional safety equipment? See the following items: CDN “Cartridge Respirator Required” sign (ECO106), “Notice: Cartridge Respirator Required in This Area” sign (EOAV328), half-face respirator (R6200), full-face respirator (RFF402), or Airline (RW2929).

See “Accessories” at the bottom of the page. If you're looking for work equipment, have a look at the following products: Facepiece for respiratory protection (RM307), 3M s-Series hood (RS655) and filter panel R256/02/01.

Texts colored green corresponds to hyperlinks leading to specific safety equipment or to a general information link.