Versaflo Series S Replacement Hood with Inner Shroud for PAPR and Supplied Air, Case of 10

Versaflo Series S Replacement Hood with Inner Shroud for PAPR and Supplied Air, Case of 10

The 3M Versaflo Series S Replacement Hood model S-607-10 is engineered for advanced respiratory protection in demanding industrial environments. Compatible with Series S powered air-purifying respirator (PAPR) systems and NIOSH-approved Type C and CE supplied air systems, it delivers an assigned protection factor of 1000.

3M manufacturer code: 7100292219, model: S-607-10

The soft inner shroud provides comfortable contact against the neck and shoulders while limiting unfiltered air infiltration. This one-size-fits-all hood is made from lightweight white polypropylene, well-suited for environments where contamination visibility on protective garments matters. Sold in cases of 10 units, it offers a cost-effective solution for managing respiratory consumable inventory.

Advantages

NIOSH-compliant respiratory protection with high protection factor

With an assigned protection factor of 1000, this hood far exceeds the minimum requirements for industrial environments exposed to fine particles, aerosols, and select gases. The positive pressure design of the powered air system maintains a continuous barrier against contaminants, even during active worker movement. It is compliant with NIOSH standards for Type C and CE supplied air respirators.

Comfort and ease of extended wear

The soft inner shroud reduces skin irritation at the neck and shoulders during long work shifts. The one-size design and lightweight white polypropylene construction facilitate quick changeovers during the workday. The hood connects easily to 3M TR-300, TR-600, and TR-800 blowers without complex adjustments.

Simplified inventory management with case-of-10 format

Sold in cases of 10 units, this hood allows teams to maintain a consumable inventory without frequent stockouts. The minimum one-case order aligns with the actual operational needs of teams using Versaflo systems daily. The standardized packaging also simplifies tracking of respiratory protection costs per production unit.

Broad compatibility across the Versaflo Series S lineup

The S-607-10 model is compatible with the majority of 3M powered air-purifying blowers, including TR-300, TR-600, and TR-800 models, as well as Series S supplied air systems. This multi-system compatibility makes it a versatile consumable for facilities operating multiple PAPR models.

FAQ – Frequently Asked Questions

What is the recommended service life for this hood?

The service life of the S-607-10 hood depends on frequency of use, working conditions, and level of contaminant exposure. 3M recommends replacing the hood when it shows visible signs of wear, tearing, discoloration, or contamination. In very dusty or chemically exposed environments, more frequent replacement is advised.

It is important never to reuse a hood after exposure to hazardous substances without assessing the nature of the contamination. Consult the safety data sheets (SDS) for the relevant materials and your respiratory protection program guidelines to determine the appropriate replacement frequency.

Is this hood compatible with supplied air respirators?

Yes. The S-607-10 hood is designed to work with NIOSH-compliant Type C and CE supplied air systems. When used in supplied air mode, the continuous airflow maintains positive pressure inside the hood, providing a protection factor of 1000 against particulates and select gases.

Make sure to verify that your airflow regulator and fittings are compatible with the Series S hood prior to use. Refer to the 3M user guide provided with your system for complete assembly instructions.

Can the inner shroud be washed or is it disposable?

The S-607-10 hood with inner shroud is intended as a single-use or frequently replaced item depending on exposure conditions. It is not designed to be washed and reused in NIOSH respiratory protection contexts, as washing could compromise the structural integrity of the hood and reduce the protection factor.

In lower contamination environments, some organizations choose to wipe the surface with non-abrasive wipes, but this practice must be approved by your OHS manager and validated against applicable regulatory requirements before implementation.

What is the difference between the S-607 and the S-657?

The S-607-10 model is a simple replacement hood with inner shroud, sold in cases of 10 units. The S-657 model is a complete hood assembly with premium headcover and inner collar, sold individually. The S-607-10 is recommended when the priority is fast turnover of low unit-cost consumables, while the S-657 is better suited for users requiring enhanced comfort and sealing during extended wear.

Complementary Suggestions

In industrial environments where this respiratory protective hood is used, other personal protective equipment is typically required for complete coverage. For hand protection, the PVC-coated flannel-lined gloves Keep Kleen powder-free nitrile 8 mils (GL7008) provide light chemical protection ideal for handling in clean and controlled industrial environments. The 3M SecureFit 400 glasses (YASF401BG) with anti-fog lens protect eyes during hood removal. The Yellow Neons corded earplugs (OA1250C) provide hearing protection based on ambient noise levels.

For arm and body protection, DuPont Tyvek 400 sleeves (VS18) and the disposable Tyvek 400 shirt (VTY303SWH) complete the barrier against particles and light splashes.

See "Accessories" at the bottom of the page. To complete or replace components of your Versaflo Series S system, find the full replacement Series S hood (RBS/433L/5), the tangle-free extension tube (RBT30), and the complete Versaflo TR-602N PAPR assembly (RVTR602N).

Green-colored text corresponds to hyperlinks leading to specific safety equipment or general information.