Special price for a limited time 2 in stock.
3M complete Versaflo kit for respiratory protection by powered air purifying respirator (PAPR). This piece of equipment gets its NIOSH homologation when assembled with the other components recognised by the manufacturer as part of a complete system. It is recommended for workers in need of respiratory protection in industrial environments. Compatible with 3M RVTR3712N filters. One kit per case.
3M Versaflo is a new generation powered air purifying respirator which offers a perfect balance between protection and comfort. It combines components which protect not only one’s respiratory tract but also one’s eyes, face and head. The kit includes among others, a high nominal capacity battery which provides 8 to 12 hours of run time and many accessories.
Included in the kit :
- 1 Powered air purifying respirator unit (RVTR302N)
- 1 Filter cover (RVTR371)
- 1 Airflow indicator (RVTR970)
- 1 High durability leather belt (RVTR326)
- 1 High capacity lithium ion battery; Run time of 8 to 12h (RVTR332)
- 1 Single station battery charger kit (RVTR341)
- 1 High efficiency (HE) filter (RVTR3712N)
- 1 Spark arrestor/prefilter (RVTR362)
- 1 Respiratory hard hat (RM307)
- 1 Peel-off visor cover (RM928)
- 1 Breathing tube; Length: length may vary between 525 mm and 850 mm. (RBT30)
3M manufacturer’s code: TR-300N+HIK
3M Versaflo powered air purifying respirator unit features RVTR302N:
PAPRs, powered air purifying respirator are systems made to blow filtered air into the respiratory equipment, which provides air automatically rather than mechanically such as regular respirators. 3M Versaflo differs from other PAPRs by its lightness, its ergonomic and its versatility which allows everyone, even bearded men to be protected when well installed. This type of equipment offers a protection up to 25 times the permissible exposure limit set by the CNESST or any other government regulation applicable. PAPRs minimize the effort put into breathing and can reduce build up heat inside the facepiece. It features a smart engine which adapts accordingly to the HEPA filter in use. It is also equipped with an alarm system - one audible and one LED – which alert the user to either a low battery or low airflow. This PAPR contains no natural rubber latex.
The RM307 facepiece consist of a hard hat, a visor and a fireproof faceseal which makes it the number 1 choice for intensive industrial work requiring head gear. The hard hat is provided with a six point head suspension and a rotary ratchet mechanism. It meets ANSI Z89.1-2003 impact protection standards and is classified type 1 and class G which is approved for industrial work. The hard hat part is made of hard fireproof polyester. Please note that it is not yet CSA approved.
The RM307 meets ANSI Z87.1-2010 standards regarding eye and face protection. 3M RM307 is equipped with a premium visor and a flame resistant faceseal. RM927 visor is made of an anti-scratch covered polycarbonate resistant to impacts. A RM928 peel-off visor cover comes with the complete system. This piece features an easily adjustable deflector which allows users to direct the location of the airflow inside the headgear for increased control and comfort.
The RM307 is equipped with a flame resistant faceseal which not only ensure an airtight environment, but protects one from flames for a limited time. Please note that to ensure airtight sealing, one must avoid the contact of facial hair with the faceseal. Failing that, the manufacturer concedes that the equipment might not meet NIOSH standards.
This type of respiratory protection system is recommended for work that will loosen solid particles in the air such as work in metal processing manufactories and assembly plants. It’s recommended for polishing, surfacing and smelting. The HEPA filters which comes with the kit protect one from most airborne particles with an 99,97% efficiency.
Do not use for:
This respirator does not offer a protection against vapors and gases. It can neither ensure the user intrinsic safety in an environment representing an explosion risk. It is strongly discouraged to wear any kind of respirator for application with sandblasting. It is also highly advised to stay away from environment that exceed 25 times the permissible exposure limit set by the CNESST or any other government regulation applicable. One should never use a respirator in an oxygen deprived environment (an atmosphere with less than 19,5 % oxygen).
Maintenance and service life:
For a safer performance, manufacturer’s recommendation must be followed. 3M recommends an inspection of the respiratory equipment before each use; to wash the respirator after each use; and to store the respirator back to its packaging.
One should never wash its respirator with any type of solvents since they can weaken some components which can affect the efficiency of the equipment. The engine, the battery and the HEPA filter must never be immersed in water. The faceseal must not be washed since it may lose its fireproof properties.
|Type of product||Safety equipment|
|Main category||Personal protection|
|Sub category||Respiratory protection|
|Sub sub category||TR-300 Versaflo head-mounted powered air purifying respirator|
|Name of the product||Complete Versaflo (Tm) kit|
|Series of products||Versaflo (Tm) TR-300|
|Country of origin||United State of America|
|Reusable||Reusable with prior hygienic measurement|
|Battery type||High-capacity Lithium-ion rechargeable battery|
|Battery life||10-12 hours|
|Inherently safe||Not inherently safe|
|Protection factor||Protection factor of 25|
|Protection against gases and vapors||Oily and not oily particles|
|Cartridge color code||Magenta|
|Faceseal membrane||With faceseal|
|Cartridge or Filter Included||HEPA filter include|
|Respirator Style||Powered air purifying respirator|
|Facepiece type||Helmet, visor with integrated facial membrane seal|
|Mounting type||Waistband installation|
|Versaflo (Tm) motor||TR-300+ Motor|
|Type of hose||Corrugated flexible and lightweight material for greater comfort ans less fatigue|
|Hose length||20 5/8 in / 52.5 cm when compressed, 33 3/8 in /85 cm when stretched|
|Type of connection||Back installation|
|Facial part||Helmet, visor and bib assembly|
|Material||See items separately|
|Height (in/cm)||10 in / 25.4 cm|
|Length (in/cm)||22 in / 55.88 cm|
|Width (in/cm)||14 in / 35.56 cm|
|Weight (lb/kg)||11 lb / 5 Kg|
|Another packaging available||16 units per pallet|
|Shipping restriction||Do not ship by air freight|
|Return conditions||No returnable if used. For more information about our return policy, please refer to the "Orders and Returns" link on the home page|