Kleton shelf cart, 2 shelves 24 X 48 in, 900 lb

Kleton shelf cart, 2 shelves 24 X 48 in, 900 lb

Manufacturer code Kleton: MB484, model MB484

This item is not kept in stock. Please allow 15 days for delivery.

The Kleton MB484 shelf cart carries your loads on two 16-gauge steel shelves, 24 in wide by 48 in deep. Each shelf has a 2-1/2 in lip, and the top shelf can be installed lip up or lip down. The 1-1/2 X 1-1/2 in formed posts, in 12-gauge steel, are 30 in long; shelf clearance is 25 in and overall height is 36 in. The cart rolls on four bolt-on 5 in polyolefin casters: 2 swivel and 2 rigid, and is pushed by a 1-1/4 in tubular handle. Its capacity is 900 lb, evenly distributed, and it weighs 74 lb. Finished in Kleton blue powder coat, it ships knocked down and is easy to assemble. Made in China, it is covered by a 1-year limited warranty.

Features of the Kleton shelf cart

• 2 shelves in 16-gauge steel, 24 X 48 in, 2-1/2 in lip
• 900 lb capacity, evenly distributed load
• 36 in overall height, 25 in clearance between shelves
• 4 polyolefin 5 in casters: 2 swivel, 2 rigid
• Kleton blue powder coat; ships knocked down, easy to assemble

Applications of the Kleton shelf cart

In the shop, the parts room or the warehouse, the Kleton shelf cart brings material to the workstation on two levels. A 2-1/2 in lip edges each shelf; installed lip down, the top shelf gives a flat surface.

Care of the Kleton shelf cart

Check that the caster and post bolts are tight after assembly, then periodically. Clean the shelves with soapy water. Spread the load evenly and do not exceed 900 lb.

FAQ: the Kleton shelf cart

What are the shelf dimensions?

24 in wide by 48 in deep. The overall height of the cart is 36 in, with 25 in clearance between shelves.

How much weight does the cart hold?

900 lb, provided the load is evenly distributed.

Is the cart delivered assembled?

No, it ships knocked down and is easy to assemble.

Can the top shelf be turned over?

Yes, it can be installed lip up or lip down.

Where is it made and what is the warranty?

It is made in China and covered by a 1-year limited warranty.

Suggestions for this Kleton shelf cart

For the parts room clerk preparing shop orders on this Kleton cart, plan for a Pioneer black detachable vest (V6937) with mesh back, Dexterity Kevlar blend gloves (GS13KFNT) with foam nitrile coating to handle sharp-edged parts, Jackson Safety Nemesis safety glasses (YA3297) with clear lens, yellow high-visibility armbands (VS15) with hook-and-loop closure to be seen by forklift drivers and Classic earplugs (OA101) in the noisy areas of the shop.

For loads too heavy or too large for the shelves, see the Kleton 30 X 48 in platform truck (CHAENT). Keep small parts in blue Stack-N-Nest bins (IPNS9202) or in a red Quantum tote (IPSNT240RD), set on the shelves. At aisle intersections, mount a full-dome convex mirror (M86) and mark the cart's parking spot with a yellow and black non-slip adhesive tape (ECT749).

The texts coloured in green correspond to hyperlinks leading to specific safety equipment or to a general information link.