In this category you will find various materials used for the fabrication of industrial curtains, which include splash curtains, strip curtains, welding curtains and welding blankets. All materials are sold by the square foot, so you can easily order a custom-sized curtain.

Minimum order is 75$ before taxes per type of material.
To order:

1. Add to your cart the quantity in square feet corresponding to the total surface area of the curtain;
2. When confirming your order, specify the curtain dimensions (height and width) in feet;
3. If applicable, specify grommet placement: top of the curtain only, or all around curtain perimeter.

Example:
You wish to order a yellow vinyl curtain that will measure 8 feet high by 6 feet wide. This curtain will be installed on a rail, therefore it needs grommets along the top for S-hooks.

1. Click on the material you wish to order. In this example, yellow vinyl is item AGFC001.
2. You need 8 ft x 6 ft = 48 square feet of material. Type 48 in the Quantity box. Click on the red Add To Cart button.
3. When you are ready to place your order, go to your shopping cart and follow instructions.
4. At the address page, there is a field for adding a comment about your order. Specify in the comment that the curtain must measure 8 feet high by 6 feet wide and that grommets should be along the top only.
5. Complete your purchase as usual.

Some of the available materials are:

• Clear vinyl, available in several gauges (thicknesses);

• Tinted vinyl, available in several colors;

• Opaque vinyl-coated polyester, available in several colors;

• Neoprene-coated nylon (Neony), available in several densities;

• Flame-resistant cotton duck cloth, available in several densities;

• Inherently flame-resistant synthetic fibers : Kevlar (aramid), aluminized Kevlar, Weldflex, Agotex, Ago-Sil, Heatstop, Goldengard;

• Clear vinyl strips for strip curtains, available in several widths.