Final stage HEPA filter for the HEPA-AIRE® and BULLDOG® portable air scrubber (SAH2, SAH2MA, SAH3KLV and SAH4MA) or any other model of air scrubber which requires a 24 in X 24 in X 6 in filters. Sold individually.
This third stage filter captures particles as small as 0.3 µm such as bacteria, mold spores, soot, pollens, animal hair, animal dander, dust mites, smoke particles and other allergens and lung damaging particles. This filter is the final stage of an air scrubber’s filtration system. It has been designed to capture particles as small as 0.3 µm that travelled through the other filters. It is recommended to replace the HEPA filter every 9000 hours or 18 months whichever comes first and depending on the concentrations in which the contaminants are found or whenever the machine emits a signal.
This fiberglass filter with a plastic frame is disposable and has been designed to filter the finest particles down to 0.3 µm.
This filter can also be a replacement final stage filter on many other air scrubbers by Abatement Technologies: BD2KL, BD2KLA, BD2KLV, BD2KLAV, H2000L, H2000LA, PAS2K-3 et PAS2KA-3 or any other models on the market that requires a filter of the same dimensions.
Please note that once the packaging has been opened, we cannot accept returns or exchanges.
|Type of product||Safety equipment|
|Main category||Industrial accessoiries|
|Sub category||Asbestos decontamination|
|Name of the product||Filtre for air purifier|
|Maintenance free||Disposable product|
|HEPA filter dimensions||24 in X 24 in X 6 in|
|HEPA Filter efficiency||Efficiency of 99.97%|
|HEPA Filter capacity||Capture particles of 0.3 µm or more|
|Time of use||It must be replaced every 9000 hours of use or after 18 months|
|Length (in/cm)||24 in / 60.9 cm|
|Width (in/cm)||24 in / 60.9 cm|
|Height (in/cm)||6 in / 15.2 cm|
|Weight (lb/kg)||5 lb / 2.26 Kg|
|Return conditions||No returnable if used. For more information about our return policy, please refer to the "Orders and Returns" link on the home page|