SAHFP

First stage filter for HEPA-AIRE & BULLDOG air scrubber. 24"X 24"X 1" filter for particles 10 µm +

$89.25

Return conditions : No returnable if used. For more information about our return policy, please refer to the "Orders and Returns" link on the home page.

Primary filter for the HEPA-AIRE® and BULLDOG® portable air scrubber by Abatement Technologies (SAH2, SAH2MA, SAH3KLV and SAH4MA) or any other model of air scrubber which requires a 24 in X 24 in X 1 in filters. Sold by the pack of 50 filters.

This first stage filter captures the 10 µm and the coarsest particles such as pollen, spray paint dust, textiles fibers, carpet fibers, etc. This filter is the first stage of an air scrubber’s filtration system. It has been designed to capture the biggest particles and to let the smaller travel through to be filtered by the following filters. It is recommended to replace the primary filter every 8 to 72 hours depending on the concentrations in which the contaminants are found or whenever the machine emits a signal.

This electrostatically charged fiberglass filter is disposable and has been designed to extend the life of the second stage filter and the HEPA filter.

This filter has MERV 4 rating (Minimum Efficiency Reporting Value) according to the measuring scale to rate the effectiveness of air filters set by the ASHRAE (American Society of Heating, Refrigerating and Air Condition). A rate 4 means the effectiveness of this filter turns around the capture of 75% of the particles 10 µm or bigger. 

This filter can also be a replacement first stage filter on many other air scrubbers by Abatement Technologies: PAS1600S, PAS1600SHS, PAS2400E, PAS2000EK, PAS2000EAK, PAS2KA-3, BD2KL, BD2KLV, H2000L, H2000LA et H5000C or any other models on the market that requires a filter of the same dimensions.

Please note that once the packaging has been opened, we cannot accept returns or exchanges.

Type of product Safety equipment
Main category Industrial accessoiries
Sub category Asbestos decontamination
Name of the product Filtre for air purifier
Product code SAHFP
Maintenance free Disposable product
Primary filter capacity Captures 75% of particles 10 µm or larger
Primary filter dimensions 24 in X 24 in X 1 in
Height (in/cm) 26 in / 66.04 cm
Length (in/cm) 27 in / 68.6 cm
Width (in/cm) 27 in / 68.6 cm
Weight (lb/kg) 12.30 lbs / 5.58 Kg
Sold by 1 pack (50 units)
Shipping restriction Significant surcharge on the cost of delivery, it is preferable to opt for a carrier by the pallet or pick up in the store
Time of use It is recommended to replace every 8 to 72 hours depending on the concentrations in which the contaminants are found
Return conditions No returnable if used. For more information about our return policy, please refer to the "Orders and Returns" link on the home page.

Reviews

No customer reviews for the moment.

Write a review
First stage filter for HEPA-AIRE & BULLDOG air scrubber. 24"X 24"X 1" filter for particles 10 µm +

First stage filter for HEPA-AIRE & BULLDOG air scrubber. 24"X 24"X 1" filter for particles 10 µm +

Accessories

30 other products in the same category: