- New
Dustless Technologies
CutBuddie dust collector for 6 to 9“ grinders, for asbestos, silica - size 7” + 18” hose
SAH20
$222.29
Return conditions:
No returnable if used. For more information about our return policy, please refer to the Orders and Returns.
CutBuddie dust collector for 6 to 9“ angle grinders, for asbestos, silica - size 7” + 18” hose
Manufactured by Dustsless, model D1750.
Dust can cause many health problems, including skin irritation, respiratory problems and allergic reactions. The lungs are particularly vulnerable, as they are constantly exposed to the hazards of the dust we breathe. That's why we offer you the Universal Dust Collector because, at Sylprotec, your safety is our priorityTM.
The CutBuddie is the professional contractor's n°1 choice for dust control when using a hand grinder to provide a dust-free working environment. This universal dust cap captures 99% of the dust generated during grinding. Its quick and easy installation makes it an indispensable accessory. Made from polycarbonate, a type of plastic known for its durability, transparency and impact resistance. Polycarbonate is also recyclable. The transparent shell gives contractors the visibility they need for optimum control.
Our grinder dust collector is a smart buy for several reasons. Firstly, it can help reduce the amount of dust and debris generated when grinding. This can improve air quality in your workspace and reduce the health risks associated with dust inhalation, which is why we offer this product.
Special features:
This type of dust collector is normally used when working with products containing or likely to contain asbestos. This is moderate-risk work. It prevents the dispersion of asbestos fibers and reduces the time needed for decontamination. The CutBuddie is compatible with 6″ to 9″ angle grinders.
Application:
-
Install the circle on the grinder and tighten the clamp;
-
Open and install nuts and blades;
-
Close to the desired depth and install an adapter hose.
-
Restriction: Not suitable for polishing machines.
Maintenance and service life:
To maintain your universal attachment, wipe each part with a sponge soaked in water and a mild cleaning product, then dry each part with a clean cloth.
Other similar models you may need:
-
SAH7, dust collector for drilling with 1–3/8 ″ (3.5 cm diameter) holes.
-
SAH8, a dust collector for drills or cutters with an adjustable diameter from 1″ to 4″ (2.5 cm to 10 cm), is also suitable for drills with large bits.
-
SAH9, dust collector for drills and saws with a maximum diameter of 8″ (20 cm).
-
SAH10, dust collector kit for gas saws.
-
SAH15, D-Capture universal dust collector set for drills (2.5 cm diameter).
-
SAH18, universal dust collector set for reciprocating saws.
-
SAH19, dust collector kit for 4″ to 5″ grinders.
Suggestions:
Need additional safety equipment? See items; (SAD6) industrial vacuum cleaner with 8-gal tank (U.S.). (R8233) P100 respirator with 3M Cool Flow™ valves against oily particles & certain hazardous particles. (SATB) Blue polyethylene adhesive tape. For sealing openings where asbestos is present (SAHFIB) Fiberspray aerosol products used as a temporary or permanent encapsulants for small surfaces 8 oz. size.
See “Accessories” at the bottom of the page. If you’re looking for work equipment, check out the following products: the regulatory poster for work involving asbestos (EAMIANTE), bags for disposing of asbestos-containing construction waste, the bilingual yellow bag (SAC2640) for asbestos waste and its complement, the transparent bag (SAC2640C) to go over the yellow bag.
Text colored green corresponds to hyperlinks to specific safety equipment or general information.
SAH20
Data sheet
- Type of product
- Safety equipment
- Main category
- Industrial accessories
- Sub category
- Asbestos decontamination
- Name of the product
- Dust collector kit
- Product code
- SAH20
- Sort by keywords
- Dust collectors
- Product use
- Dust collectors
- Manufacturer
- Dustless
- Country of origin
- United State of America
- Features
- Dust collector for 6“ to 9” angle grinders
- Additional Features
- This type of dust collector is normally used when working with products containing asbestos or silica. It has the advantage of reducing risks to moderate or low levels
- Characteristic adding safety
- Transparent hull gives contractors the visibility they need for optimum control
- Environmental characteristics
- This device captures 99% of the dust generated during cutting. It prevents the dispersion of asbestos fibers and reduces the time required for decontamination
- Includes
- One 18″ adapter hose, one 5/8” arbor extender with Adapter, 3 spacing washers and one releasable tie
- Property of the material
- Made from polycarbonate, a plastic known for its durability, transparency and impact resistance
- Feature that facilitates use
- This product is ideal for construction and renovation as it can vacuum dust from asbestos, concrete, drywall (Gyproc), stone, etc
- Type of hose
- Corrugated flexible and lightweight material for greater comfort ans less fatigue
- Hose length
- Hose length 18 in / 45.72 cm
- Connects with
- Compatible with 4" to 5" grinders
- Material1
- Clear polycarbonate
- Material2
- Plastic
- Material3
- Metal
- Washable
- Wipe each element with a sponge soaked in water and a mild cleaning product, then dry each element with a clean cloth. It is recommended to use at least a category N95 mask
- Length (in/cm)
- 9.25 in / 23.49 cm
- Width (in/cm)
- 3.75 in / 9.525 cm
- Height (in/cm)
- 9.75 po / 22.86 cm
- Weight (lb/kg)
- 2.4 lb / 1.08 Kg
- Sold by
- Unit
- Color
- Transparent
- Restriction
- Not suitable for polishing machines
- Return conditions
- No returnable if used. For more information about our return policy, please refer to the "Orders and Returns" link on the home page
- Caution
- CAUTION: Please note: When working with asbestos and silica, you will need a suitable HEPA vacuum cleaner that has passed a DOP test
New
You might also like
8 other products in the same category:
