- New
Zenith A4 cut-resistant winter gloves
GZHA4-L
$7.65
This item is not stocked. During the winter season, 8/medium to 11/2x-large: allow 5 to 7 days for delivery; other formats: allow 42 to 63 days; off-season, contact us for the lead time.
Zenith cut-resistant winter gloves for handling sharp parts in the cold, indoors or outdoors. The seamless, stretchable 13-gauge high-performance polyethylene (HPPE) knit has an acrylic lining for warmth. The foam nitrile palm coating keeps excellent grip in light oil, greasy or wet conditions. ANSI A4 cut, EN 388 level 4 abrasion, tear and puncture, EN 511 level 2 contact cold. Sizes S to 2XL, sold by the pair.
Return conditions:
No returnable if used. For more information about our return policy, please refer to the Orders and Returns.
Zenith A4 cut-resistant winter gloves in HPPE knit with foam nitrile coating, pair
This item is not stocked. During the winter season, 8/medium to 11/2x-large: allow 5 to 7 days for delivery; other formats: allow 42 to 63 days; off-season, contact us for the lead time.
Offered in 5 sizes, from 7/small (S) to 11/2X-large (2XL); choose yours in the size table below. Cold sheet metal, frosty profiles, strapped packaging: in winter, sharp edges do not go away, and hands must stay both protected and warm. These Zenith gloves do both. Their seamless high-performance polyethylene (HPPE) knit reaches ANSI A4 cut level, the acrylic lining keeps warmth in, and the foam nitrile palm coating keeps excellent grip on lightly oily, greasy or wet parts. Sold by the pair.
Features of the Zenith A4 winter gloves
- ANSI A4 cut level.
- EN 388: abrasion 4, tear 4, puncture 4.
- EN 511: contact cold resistance level 2.
- 13-gauge HPPE knit, seamless and stretchable.
- Acrylic lining for warmth and comfort.
- Foam nitrile palm coating, good grip in oily or wet conditions.
Available sizes: S (7) to 2XL (11), pair
| Selection | Sylprotec code | Zenith manufacturer code | Colour |
|---|---|---|---|
| 7 / Small (S) | GZHA4-S | SGF948 | Grey and black |
| 8 / Medium (M) | GZHA4-M | SGF949 | Grey and black |
| 9 / Large (L) | GZHA4-L | SGF950 | Grey and black |
| 10 / X-Large (XL) | GZHA4-XL | SGF951 | Grey and black |
| 11 / 2X-Large (2XL) | GZHA4-2XL | SGF952 | Grey and black |
ANSI, EN 388 and EN 511 compliance
The manufacturer publishes an ASTM/ANSI A4 cut level, the cut rating of the North American ANSI/ISEA 105 standard. Under the European EN 388 standard, the glove reaches level 4 in abrasion, tear and puncture; it is not rated against needlesticks. The EN 511 standard assesses protection against cold: the level 2 obtained for contact cold indicates the glove's resistance when grasping a cold object.
HPPE knit properties
High-performance polyethylene (HPPE) is an extremely strong fibre that gives the glove its ANSI A4 cut level without making it heavy. Knitted in 13 gauge, seamless and stretchable, it follows hand movements and leaves good dexterity to pick up small parts. Under the knit, the acrylic lining provides warmth and comfort in cold weather.
Foam nitrile coating properties
The palm is coated with foam nitrile, which provides excellent grip in light oil, greasy and wet conditions, common in winter with melting snow. Only the palm is coated: the back of the hand stays uncoated knit.
Applications of cut-resistant winter gloves
These gloves suit handling of sharp-edged materials in cold weather: sheet metal, metal profiles, glass, machined parts and strapped packaging, in unheated warehouses, yards, docks and on construction sites. For wet grip with a latex coating, see the Superior Glove TenActiv A3 latex palm gloves (GTKTAGLX); for extreme wet cold, the Superior Glove SNOW388V extreme cold gloves (GSNOW388V).
Glove use restrictions
Level A4 protects against cuts, not against needlesticks or moving blades. The EN 511 contact cold level does not correspond to a minimum use temperature.
Glove care and service life
Wash the gloves in cold water with a mild detergent, rinse them in cold water, then lay them out to dry; never use bleach. Replace them as soon as the knit is cut or holed, the coating cracks or peels, or the lining is worn: a damaged glove does not keep its cut level.
FAQ: Zenith A4 cut-resistant winter gloves
What sizes are offered?
Five sizes, from 7 / small (S) to 11 / 2X-large (2XL). The size table gives the code for each size.
What is the cut level?
ANSI level A4. The glove also reaches level 4 in abrasion, tear and puncture under EN 388.
Are the gloves lined?
Yes, with an acrylic lining that keeps warmth. Contact cold is rated level 2 under EN 511.
Do they keep a good grip on wet surfaces?
Yes. The foam nitrile palm provides excellent grip in light oil, greasy and wet conditions.
Can they be washed?
Yes, in cold water with a mild detergent, followed by a cold-water rinse; lay them out to dry, without bleach.
Suggestions for handling in the cold
For the material handler who works in the cold, plan for the Ergodyne N-Ferno short liner (VNF6840), the Zenith clear anti-fog goggles (YG456), the Delta Plus Omega II safety helmet (TA14OR), the Pioneer high-visibility yellow fleece hoodie (VV6925H), the bright yellow balaclava (V315) designed for hard hat use, the Due North winter boot cleats (VGET) and the Pioneer yellow and black winter overalls (V50412C).
To complete the protection, add the Kevlar cut-resistant sleeves (VS21) for the forearms, Zenith hand warmers (VCHM20), the black nylon eyewear cord (YSS50), a traffic cone (EPTCONE36) and the personal first aid kit (TR01V).
Ergodyne hand-warmer muff (VNF6980) ; hand warmer sachets (VCHM20) ; toe warmer sachets (VCHO20).
GZHA4-L
Data sheet
- Product group
- Safety equipment
- Main category
- Personal protection
- Sub category
- Gloves
- Sub sub category
- Cut-resistant gloves
- Name of the product
- Winter cut resistant glove
- Series of products
- Zenith
- Product code
- GZHA4
- Sort by keywords
- Cut-resistant gloves
- Product use
- Handling sharp parts in cold weather
- Approved/Certified
- ANSI A4 cut, EN 388: abrasion 4, tear 4, puncture 4, EN 511: contact cold 2
- Manufacturer
- Zenith
- Country of origin
- Vietnam
- Inside of the glove
- Acrylic lining
- Coating
- Foam nitrile-coated palm
- Fineness of the knitting
- 13 Gauge
- Flame Resistance
- No Flame resistant
- Choice of format
- Small (7) to double extra-large (11) available
- Recommended use temperature
- EN 511 contact cold resistance level 2
- Features
- Foam nitrile palm for excellent grip in light oil, greasy or wet conditions
- Additional Features
- For indoor and outdoor cold-weather use
- Characteristic adding safety
- Stretchable seamless HPPE knit
- Comfort features
- Warm acrylic lining and stretchy seamless knit
- Material1
- Seamless HPPE knit
- Material3
- Acrylic
- Washable
- Wash in cold water at 85°F/30°C with mild detergent. It is recommended to rinse gloves in cold water before drying. Spread to dry. Never use bleach on this glove
- Length (in/cm)
- 8 in / 20.32 cm
- Width (in/cm)
- 6 in / 15.24 cm
- Height (in/cm)
- 0.25 in / 0.6 cm
- Weight (lb/kg)
- 0.26 lb / 0.117 kg
- ****Variable weight and size****
- Dimensions and weight vary with the selected size; values shown are for size Large (L)
- Sold by
- Pair
- Color
- Gray/Black
- Return conditions
- No returnable if used. For more information about our return policy, please refer to the "Orders and Returns" link on the home page
Specific References
- mpn
- SGF950
You might also like
Comments (0)
No customer reviews for the moment.
8 other products in the same category:
This item is not stocked. During the winter season, 8/medium to 11/2x-large: allow 5 to 7 days for delivery; other formats: allow 42 to 63 days; off-season, contact us for the lead time.
Zenith cut-resistant winter gloves for handling sharp parts in the cold, indoors or outdoors. The seamless, stretchable 13-gauge high-performance polyethylene (HPPE) knit has an acrylic lining for warmth. The foam nitrile palm coating keeps excellent grip in light oil, greasy or wet conditions. ANSI A4 cut, EN 388 level 4 abrasion, tear and puncture, EN 511 level 2 contact cold. Sizes S to 2XL, sold by the pair.