

ANSI Z358.1-2009 approved. Allows a minimum flow rate greater than 3.0 GPM (11.4 L/min) at 30 PSI. No temperature control.
Ideal for laboratories, medical and industrial environments, workshops, garages, airports, processing plants, paper mills and any other workplace where employees may be exposed to dust, particles or hazardous materials.
No returnable if used. For more information about our return policy, please refer to the Orders and Returns.
Certified ANSI Z358.1-2009. Minimum flow exceeds 3.0 gpm (11.4 L/min). It does not include a device for controlling water temperature.
Ideal for laboratories, medical facilities, industries, workshops, garages, airports, food processing plants, paper mills, and any other places where workers risk being exposed to dust, particulates or dangerous materials.
This eye wash station is mounted on the floor and does not need to be placed close to walls. Its single-step activation simply requires a push on the large handle, leaving a user’s hands free once turned on. The hinged dust cover tilts open at the same time as the handle moves. Once activated, the wash station will stay on until manually turned off. The spray heads have a unique elongated design, with multiple water jets, that cover more area than traditional face wash spray heads and facilitate face rinsing. This eye/face wash station is also barrier-free, for use by people in wheelchairs.
The wash station has separate pipes for water intake and drain, and ensures a safe, steady flow of water, even if the water supply pressure varies between 30 and 90 PSI. The bowl is made of yellow impact-resistant plastic. The spray heads are equipped with strainers to filter water particulates, and with antimicrobial protection. Pipes are made of galvanized steel protected by a yellow Bradtec covering.
The kit includes:
The manufacturer recommends the installation of a thermostatic valve in order to comply with ANSI Z358.1-2009 standards. A thermostatic valve keeps rinsing water at a lukewarm temperature. Rinsing water should not be too cold (for more comfort while rinsing for the minimum required rinsing time of 15 minutes) nor too hot (to avoid aggravating eye or face injuries and to avoid scalding).
Choose safety and reliability with the Bradley Halo wall-mounted eyewash and face wash station.
Designed to meet the highest standards, this eyewash and face wash station is equipped with a plastic bowl and dust cover, ensuring optimal protection. Compliant with ANSI Z358.1-2009 standards, it guarantees efficient and safe use in case of an emergency. Perfect for industrial and commercial environments, this eyewash and face wash station is an essential choice for any company concerned about the well-being of its employees.
Make safety a priority.
This eyewash and face wash station stands out for its integrated dust cover, providing extra protection against contaminants.
To use this eyewash and face wash station, start by removing the dust cover. Then, position yourself in front of the plastic bowl and pull the handle to activate the water flow. Rinse your eyes and face thoroughly for at least 15 minutes, keeping your eyes open and moving your head to ensure that the entire affected area is properly rinsed. Once finished, release the handle to stop the water flow and replace the dust cover.
To store this eyewash and face wash station, ensure it is placed in a dry and clean area, away from dust and contaminants. Make sure that access is easy and unobstructed in case of an emergency. Regular maintenance is also required to ensure its proper functioning.
Do you need additional safety equipment? Check out the following items: CDN Eye Wash Poster (ECU505-812), rigid plastic eye patches, 7.5 X 1.25 X 3.8 cm (PS511), sterile eye pads, 4.1 X 6.6 cm (PS514), Cederroth emergency eye wash solution (PD505-235), wall-mounted eye wash kit, 1 liter (PD520), wall mount for Cederroth eye wash solution (PD505S).
Under “Accessories” at the bottom of the page. If you're looking for work equipment, see the following products: Earplugs (OA101) and 3M N95 respirators (R8210).
Data sheet
You might also like