Inner replacement strap Cynch-Lok DBI-SALA 3M 6 ft 1200136

Cynch-Lok(TM) DBI-SALA(R) inner replacement strap for pole fall-limiting device

This inner strap is a replacement part for the DBI-SALA(R) Cynch-Lok(TM) fall-limiting device used to climb wooden utility poles (electrical and telephone poles). It replaces the worn inner lanyard of a complete device, without having to repurchase the whole assembly.

3M purchase code: 7012816925, 3M model number: 1200136.

This part fits the modular Cynch-Lok(TM) system, made up of interchangeable outer and inner components. It supports the complete devices: distribution rope rope (FPL1204057), transmission rope poles (FPL1204058) and distribution strap strap (FPL1204075). Browse the products activated by the green hyperlink or check the Lanyards tab.

Materials and construction of the Cynch-Lok device

The inner strap is woven blue nylon, strong and abrasion-resistant. It has a built-in wear indicator: as soon as the witness thread becomes visible, it is time to replace the component. It connects through a zinc-plated steel Saflok(TM) twist-lock carabiner. Manufactured by Capital Safety (DBI-SALA(R) brand).

An interchangeable-parts system

The Cynch-Lok(TM) is a modular system made up of an outer strap and an inner lanyard, both offered separately as replacement parts. The nylon inner lanyard (FPL1200136) and the are offered separately. This design lets you replace a worn part without repurchasing the complete assembly and adapt a single device to different pole diameters.

Compatibility and capacity

This inner strap is 6 ft (1.83 m) long and rated for a load capacity of 141 kg (310 lb) including the user, clothing and tools, in compliance with CSA Z259.14 (Type A and AB) and ASTM F887. Always check the part's compatibility with your Cynch-Lok(TM) device before installing it.

Inspection and maintenance

Like any fall-protection component, this inner strap must be inspected before each use: a visual inspection of the strap, carabiner and labels. Check that the wear indicator is not showing (visible witness thread). Replace the part immediately after any fall or if there is any doubt. Clean with water and mild soap, then air dry.

FAQ: Frequently asked questions about the inner replacement strap

Here are the most common questions about this replacement part.

Is this part a complete fall-arrest device?

No. It is only the inner replacement lanyard. To climb, it must be installed in a complete Cynch-Lok(TM) device fitted with its outer strap.

How do I know when to replace it?

As soon as the wear indicator (witness thread) becomes visible, or immediately after a fall, the strap must be replaced.

How does this part fit onto the device?

The blue nylon inner replacement strap (FPL1200136) fits inside the to rebuild the complete Cynch-Lok(TM) device. Both components are interchangeable and replaced separately.

Complementary equipment suggestions

To complete the protection of the lineman climbing with the Cynch-Lok(TM), plan for clear (YAZ2600) and gray (YA12E93102) safety glasses depending on lighting, TenActiv (GS13TAFNT) or Dexterity (GS18KGFN) cut-resistant gloves against edges and cables, a type 2 class E safety helmet (TA222), as well as arc-rated flame-resistant clothing, shirt (V340) and orange (V1765), against electrical arc hazards.

This replacement part fits into a complete system: connect the Cynch-Lok(TM) to an ExoFit NEX SEAT-BELT 4D lineworker harness (FPH1113653CALP), then choose the complete device suited to the pole being climbed: distribution pole rope (FPL1204057), 8 ft transmission pole rope (FPL1204058), or distribution pole strap (FPL1204075).

The texts coloured in green correspond to hyperlinks leading to specific safety equipment or to a general information link.