- New
3M DBI-SALA Arc Flash Y Lanyard 6 ft 1246526C
FPL1246526C
$1,364.00
3M DBI-SALA 1246526C 6 ft arc-flash-resistant Y-shaped twin-leg lanyard with energy absorber, stretchable webbing, abrasion-resistant straps, 100 percent tie-off and listed 254 lb / 115 kg capacity.
Return conditions:
No returnable if used. For more information about our return policy, please refer to the Orders and Returns.
3M DBI-SALA 1246526C Arc Flash Y Lanyard, 6 ft
3M manufacturer code: 7012817318, model 1246526C
This 3M DBI-SALA Y-shaped twin-leg lanyard connects a worker to compatible anchorage points in a fall protection system. Model 1246526C measures 6 ft and is designed for environments with arc flash risk. Its stretchable webbing follows user movement, while the energy absorber helps limit arresting forces in the event of a fall.
Applications for the 3M DBI-SALA 1246526C Arc Flash Y Lanyard
This lanyard is listed for grinding, electrical work and welding, as well as construction, transportation, utilities, general industry and oil and gas. Its twin-leg configuration supports 100 percent tie-off during movement between anchorage points. Final selection must consider fall clearance, the harness, connector compatibility and jobsite procedures.
Verified Details of the 6 ft 1246526C Lanyard
- Y-shaped twin-leg lanyard with energy absorber
- Total length: 6 ft / 1.83 m
- Working length: 6 ft / 1.8 m
- Listed load capacity: 254 lb / 115 kg
- Lanyard type: variable and elastic
- Number of legs: 2
- Number of sections: double, 100 percent tie-off
- Anchorage connection: spring snap hook
- Harness connection: anodized aluminum spring snap hook
- Anchorage material: zinc-plated steel
- Abrasion-resistant straps
- Connected safety device using an ID
- Colour: black
- Country of origin: USA
- Shipping weight: 8.77 lb
Precautions for a Twin-Leg Fall Protection Lanyard
Inspect the lanyard, webbing, energy absorber, connectors and labels before each use. Make sure the components used together are compatible and that the anchorage point is suited to the work being performed. Any lanyard showing abnormal wear or that has arrested a fall must be removed from service according to applicable requirements.
FAQ: 3M DBI-SALA 1246526C Y Lanyard
What is the length of this lanyard?
Model 1246526C has a total length of 6 ft, or 1.83 m.
What load capacity is listed?
The listed load capacity is 254 lb, or 115 kg.
Is this lanyard intended for work with arc flash risk?
Yes. The model is presented as an arc-flash-resistant lanyard with an energy absorber.
Which connectors are listed?
The lanyard uses spring snap hooks on the anchorage and harness sides. The harness-side connector is listed as anodized aluminum.
What is the twin-leg configuration used for?
It helps maintain a connection while transitioning between compatible anchorage points.
Complementary suggestions for this arc flash Y lanyard:
A electrician working at height near energized conductors connecting with this DBI-SALA 3M lanyard completes personal protection with a flame-resistant garment (V7762) required on this type of site, a helmet (TA82) held by its chinstrap (TA80CS), cut-resistant gloves (G132), safety eyewear (YA12E91001) and corded earplugs (OA1101) that stay around the neck and cannot drop from height.
For the lanyard to work in a complete fall arrest system, plan a DBI-SALA 3M harness (FPH140215XCAELP), a DBI-SALA 3M fixed anchor (FPA210481X), a second DBI-SALA 3M beam anchor (FPA210314X), a 200 ft RollGliss R550 rescue (FPLR5503325) and descent device for emergency lowering, a DANGER barricade tape (ECT3YE7) to cordon off the ground area and the sign (ECO130) reminding that the harness is mandatory.
FPL1246526C
Data sheet
- Product group
- Safety equipment
- Main category
- Personal protection
- Sub category
- Fall protection
- Sub sub category
- Lanyards
- Name of the product
- Arc-flash-resistant Y-shaped double lanyard with energy absorber
- Product code
- FPL1246526C
- Product use
- Grinding, electrical work, welding, construction, transportation, utilities and general industry
- Manufacturer
- 3M DBI-SALA
- Country of origin
- United State of America
- Format
- 6 ft / 1.8 m
- Types of lanyards
- Y-shaped double lanyard
- Features
- 6 ft arc-flash-resistant lanyard with stretchable webbing and abrasion-resistant straps
- Additional Features
- Abrasion-resistant straps
- Characteristic adding safety
- Connected safety device using an ID
- Characteristics of the strap or cable
- Stretchable webbing with abrasion-resistant straps
- Characteristics of metal parts
- Zinc-plated steel on anchorage side and anodized aluminum on harness side
- Carabiners characteristics
- Spring snap hooks on anchorage and harness sides
- Feature that facilitates use
- Stretches with the user movement
- Includes
- Energy absorber and two legs for 100 percent tie-off
- Worker’s weight
- 254 lb / 115 kg (including tools and equipment)
- Material1
- Webbing
- Material2
- Zinc-plated steel and anodized aluminum
- Weight (lb/kg)
- 8.77 lb / 3.98 kg
- Sold by
- Unit
- Color
- Black
- Caution
- Listed load capacity: 254 lb / 115 kg
You might also like
Comments (0)
No customer reviews for the moment.
8 other products in the same category:
3M DBI-SALA 1246526C 6 ft arc-flash-resistant Y-shaped twin-leg lanyard with energy absorber, stretchable webbing, abrasion-resistant straps, 100 percent tie-off and listed 254 lb / 115 kg capacity.