This product is no longer in stock
Hi-Viz orange Viking Handyman® 300D waterproof raincoat with silver retroreflective stripes and fluorescent yellow stripes. This coat meets the CSA Z96-09, Class 2, Level 2 (VP231).
This coat is available in many sizes from small (S) to triple extra large (3XL). Select your size in the drop-down menu above.
Viking™ Product Code: 6327JO
VP231 under “Accessories” at the bottom of the page. You’d rather have hi-viz yellow? No problem! Simply contact our customer service, we have solutions that fit everyone!
This 300-denier oxford polyester safety wear has been lined with polyvinyl chloride (PVC) to provide water-resistance. The manufacturer grants this product a waterproof rating of 10,000 mm, i.e. it can withstand the pressure of a 10 m water column. A waterproof rating is granted when a material has been tested under the pressure of a cylinder filled with water, in this case, 10 m high of water. This height defines the limit at which the material stops being resistant and water starts passing through.
All seams have been taped and heat-sealed. The coat was also fully mesh-lined for more comfort. This coat is ideal for everyday work, even in extreme conditions as it is perfectly watertight. It is recommended for any worker surrounded by motorized vehicles: construction workers, white collars, drivers, transport workers, etc.
Reflective stripes and visibility:
This water-resistant coat has been provided with silver retroreflective stripes surrounded by fluorescent yellow stripes. Each one of them has a width of 50 mm (2 in.). This raincoat has two front vertical stripes, back X-shaped stripes, one horizontal stripe around the waist, and one stripe around each arm.
Fluorescent yellow (or that safety greenish yellow) is quite visible during daylight and in poor natural light conditions, e.g. at dawn or dusk. In most cases, this yellow ensures a high contrast with most backgrounds. Since bright yellow is lighter than orange, it can be perceived more easily at night, yet reflective stripes will always be best in the dark.
Fluorescent orange is quite visible during daylight and in bright artificial lighting conditions. In most cases, it ensures a high contrast with most backgrounds. However, bright orange is less visible at night and in poor lighting conditions, be it natural or artificial, e.g. at dawn or dusk.
Silver retroreflective stripes are the most visible there is in poor lighting conditions, be it natural or
The wide style of this coat allows one to easily wear warm clothes underneath while still allowing a good airflow. It features two inner linings which were sewn together: the lining on the upper back consists of mesh polyester whereas the rest of the coat is lined with woven polyester. It features an inner mesh pocket which is protected by a flap equipped with a hook and loop placket. This raincoat features a full front single slider plastic zipper fully protected by a hook and loop flap. Six vents at the front were included in the design to ensure breathability. It also features two flap-protected front pockets. Both sleeves may be adjusted with the hook and loop band they feature for a tight fit. The hood which is included may be removed and snapped on again as needed. This coat is not flame-resistant.
This PVC lined oxford polyester raincoat is said to be manufactured with a 300-deniers yarn; in layman’s terms, it is a medium-weight coat which is lightweight enough to offer comfort but is heavyweight enough to offer an effective protection. By definition, 300 deniers refer to the weight in grams of 9,000 m of the yarn used to make this coat, that is, 300 deniers equal 300 g. The manufacturer, Pioneer®, is unable to provide the polyurethane liner’s thickness.
The airtightness of this coat comes from its double sewn, taped and heat-sealed seams. PVC-lined waterproof safety wear is usually worn by workers who may be exposed to remote or moderate risks of chemical splashes. PVC is a thermoplastic polymer which offers resistance to chemicals, oils, greases, acids, alkalies, solvents, oxidants, and ozone. PVC is also resistant to wear and
PVC-coated clothes are recommended for workers that work in environments where the temperature varies between -5 °C and 18 °C accompanied by showers and strong winds. This rainwear keeps workers dry during heavy rains because PVC is absolutely non-porous; it is, however, absolutely not breathable which may cause a sauna effect through perspiration. One must thus choose wisely what to wear underneath according to the efforts required.
This raincoat should always be machine-washed in a delicate setting with cold or lukewarm water, and a gentle soap. Never use bleaching agents or fabric softeners on this coat. It should also be air-dried in a sheltered spot out of direct sunlight. Never tumble dry, iron or dry clean this raincoat. The manufacturer ensures that this coat has a service life of twenty-five wash.
|Type of product||Safety equipment|
|Main category||Personal protection|
|Sub category||Safety clothing|
|Sub sub category||Rainwear & rain gear|
|Name of the product||High visibility waterproof coat|
|Series of products||HandymanMD 300D|
|Approved/Certified||Meets CSA Z96-15, Class 2, Level 2|
|Country of origin||Unknown origin|
|Choice of format||Size small (S) to 3 extra-large (3XL) available|
|Fineness of the knitting||300 deniers|
|Reusable||Reusable with prior hygienic measurement|
|Features||With alternating silver retroreflective and fluorescent orange stripes (50 mm / 2" wide). 2 vertical stripes on the front, 2 crossed X stripes on the back, 1 horizontal stripe on the waist and 1 stripe around the wrists|
|Additional Features||Equipped with an interior mesh pocket that is protected by a Velcro® flap and two front pockets that are also protected by flaps|
|Includes||Closes with a plastic toothed zipper protected by a storm flap that closes with a hook-and-loop closure|
|Includes 2||Six ventilation holes protected by flaps have been made in the front of the coat to ensure breathability. Removable hood included|
|Waterproof rating||The manufacturer grants this product a waterproof rating of 10000 mm. All seams have been taped and heat-sealed|
|Precision on the color of the material and their visibilities||Fluorescent orange is very visible during the day and in conditions with a lot of artificial light. In most situations, it also provides high contrast with the background.|
|Flame Resistance||No Flame resistant|
|Comfort features||All seams are taped and heat sealed|
|Material1||Woven polyester in oxford pattern|
|Material2||Chlorinated polyvinyl (PVC)|
|Washable||Machine wash with mild soap and hang to dry out of the sun. DO NOT PUT IN THE DRYER.|
|Height (in/cm)||6 in / 15.2 cm|
|Length (in/cm)||12 in / 30.48 cm|
|Width (in/cm)||6 in / 15.24 cm|
|Weight (lb/kg)||2 lbs / 0.9 Kg|
|Useful life||The manufacturer indicates that the material has a useful life of twenty-five washes|
|Dimensions of the product||The dimensions of the product depend on the size selected by the customer.|
|Return conditions||No returnable if used. For more information about our return policy, please refer to the "Orders and Returns" link on the home page.|
No customer reviews for the moment.